Messages by text - Error in shader compilation: info: %s %s %s

Distinct message texts 3,101-3,200, most hits first. Games and Rows count where each text was seen; click a text for its games. Refreshed every 10 minutes. Back to the list by game

Only count reports from version or newer
Message # of games Rows Hits Latest Report
Error in shader compilation: info: ERROR: 0:22: 'assign' : Implicit conversions for shift operators are not allowed before GLSL 1.20 or without GL_EXT_gpu_shader4 enabled. ERROR: 0:22: 'assign' : Implicit conversions for shift operators are not allowed before GLSL 1.20 or without GL_EXT_gpu_shader4 enabled. ERROR: 0:22: '>>' : wrong operand types no operation '>>' exists that takes a left-hand operand of type 'uniform uint' and a right operand of type 'const int' (or there is no acceptable conversion) ERROR: 0:22: 'assign' : Implicit conversions for shift operators are not allowed before GLSL 1.20 or without GL_EXT_gpu_shader4 enabled. ERROR: 0:22: 'assign' : Implicit conversions for shift operators are not allowed before GLSL 1.20 or without GL_EXT_gpu_shader4 enabled. ERROR: 0:22: '>>' : wrong operand types no operation '>>' exists that takes a left-hand operand of type 'uniform uint' and a right operand of type 'const int' (or there is no acceptable conversion) 00190000:0080f022 Tex TexAlpha 2x TFuncMod AlphaTest >= TestDiscardToZero #version 300 es // Driver: Intel(R) HD Graphics for BayTrail - GLSL 300 #define DISCARD discard precision lowp float; precision highp int; #define splat3(x) vec3(x) #define mul(x, y) ((x) * (y)) // 00190000:0080f022 Tex TexAlpha 2x TFuncMod AlphaTest >= TestDiscardToZero uniform sampler2D tex; uniform uint u_alphacolorref; uniform uint u_alphacolormask; in lowp vec4 v_color0; in mediump float v_fogdepth; in mediump vec3 v_texcoord; int roundAndScaleTo255i(in float x) { return int(floor(x * 255.0 + 0.5)); } out vec4 fragColor0; void main() { vec4 t = texture(tex, v_texcoord.xy); vec4 p = v_color0; vec4 v = p * t; v.rgb = clamp(v.rgb * 2.0, 0.0, 1.0); if ((roundAndScaleTo255i(v.a) & int(u_alphacolormask >> 24)) < int(u_alphacolorref >> 24)) v.a = 0.0; fragColor0 = v; } 1 1 1 2023-01-27
Error in shader compilation: info: 0:1: F0002: Mali-400 GP register allocation failed for vertex shader. Please contact [email protected] with the shader causing the problem, along with this error message. Mali online shader compiler r8p0-00dev0 [Revision 96995]. 01f05555:00000325 HWX N LM Fog Light: 0: c:1 t:1 1: c:1 t:1 2: c:1 t:1 3: c:1 t:1 Cull #version 100 // Mali-400 MP - GLSL 100 precision highp float; #define gl_VertexIndex gl_VertexID #define splat3(x) vec3(x) #define mul(x, y) ((x) * (y)) attribute vec3 position; attribute mediump vec3 normal; uniform mat4 u_proj; uniform mat4 u_world; uniform mat4 u_view; uniform vec3 u_lightpos0; uniform mediump vec3 u_lightatt0; uniform lowp vec3 u_lightambient0; uniform lowp vec3 u_lightdiffuse0; uniform lowp vec3 u_lightspecular0; uniform vec3 u_lightpos1; uniform mediump vec3 u_lightatt1; uniform lowp vec3 u_lightambient1; uniform lowp vec3 u_lightdiffuse1; uniform lowp vec3 u_lightspecular1; uniform vec3 u_lightpos2; uniform mediump vec3 u_lightatt2; uniform lowp vec3 u_lightambient2; uniform lowp vec3 u_lightdiffuse2; uniform lowp vec3 u_lightspecular2; uniform vec3 u_lightpos3; uniform mediump vec3 u_lightatt3; uniform lowp vec3 u_lightambient3; uniform lowp vec3 u_lightdiffuse3; uniform lowp vec3 u_lightspecular3; uniform lowp vec4 u_ambient; uniform lowp vec3 u_matdiffuse; uniform lowp vec4 u_matspecular; uniform lowp vec3 u_matemissive; uniform lowp vec4 u_matambientalpha; uniform highp vec2 u_fogcoef; uniform highp vec4 u_depthRange; uniform highp vec4 u_cullRangeMin; uniform highp vec4 u_cullRangeMax; varying lowp vec4 v_color0; varying lowp vec3 v_color1; varying mediump float v_fogdepth; vec3 normalizeOr001(vec3 v) { return length(v) == 0.0 ? vec3(0.0, 0.0, 1.0) : normalize(v); } void main() { vec3 worldpos = mul(vec4(position, 1.0), u_world).xyz; mediump vec3 worldnormal = normalizeOr001(mul(vec4(normal, 0.0), u_world).xyz); vec4 viewPos = vec4(mul(vec4(worldpos, 1.0), u_view).xyz, 1.0); vec4 outPos = mul(u_proj, viewPos); lowp vec4 lightSum0 = u_ambient * u_matambientalpha + vec4(u_matemissive, 0.0); lowp vec3 lightSum1 = splat3(0.0); vec3 toLight; lowp vec3 diffuse; float distance; lowp float lightScale; mediump float ldot; toLight = u_lightpos0 - worldpos; distance = length(toLight); toLight /= distance; ldot = dot(toLight, worldnormal); lightScale = clamp(1.0 / dot(u_lightatt0, vec3(1.0, distance, distance*distance)), 0.0, 1.0); diffuse = (u_lightdiffuse0 * u_matdiffuse) * max(ldot, 0.0); if (ldot >= 0.0) { ldot = dot(normalize(toLight + vec3(0.0, 0.0, 1.0)), worldnormal); if (u_matspecular.a <= 0.0) { ldot = 1.0; } else { ldot = pow(max(ldot, 0.0), u_matspecular.a); } if (ldot > 0.0) lightSum1 += u_lightspecular0 * u_matspecular.rgb * ldot * lightScale; } lightSum0.rgb += (u_lightambient0 * u_matambientalpha.rgb + diffuse) * lightScale; toLight = u_lightpos1 - worldpos; distance = length(toLight); toLight /= distance; ldot = dot(toLight, worldnormal); lightScale = clamp(1.0 / dot(u_lightatt1, vec3(1.0, distance, distance*distance)), 0.0, 1.0); diffuse = (u_lightdiffuse1 * u_matdiffuse) * max(ldot, 0.0); if (ldot >= 0.0) { ldot = dot(normalize(toLight + vec3(0.0, 0.0, 1.0)), worldnormal); if (u_matspecular.a <= 0.0) { ldot = 1.0; } else { ldot = pow(max(ldot, 0.0), u_matspecular.a); } if (ldot > 0.0) lightSum1 += u_lightspecular1 * u_matspecular.rgb * ldot * lightScale; } lightSum0.rgb += (u_lightambient1 * u_matambientalpha.rgb + diffuse) * lightScale; toLight = u_lightpos2 - worldpos; distance = length(toLight); toLight /= distance; ldot = dot(toLight, worldnormal); lightScale = clamp(1.0 / dot(u_lightatt2, vec3(1.0, distance, distance*distance)), 0.0, 1.0); diffuse = (u_lightdiffuse2 * u_matdiffuse) * max(ldot, 0.0); if (ldot >= 0.0) { ldot = dot(normalize(toLight + vec3(0.0, 0.0, 1.0)), worldnormal); if (u_matspecular.a <= 0.0) { ldot = 1.0; } 1 1 1 2023-01-25
Error in shader compilation: info: 0:1: F0002: Mali-400 GP register allocation failed for vertex shader. Please contact [email protected] with the shader causing the problem, along with this error message. Mali online shader compiler r10p0-00rel0 [Revision 96995]. 01f04444:00000b31 HWX T N LM Tex Light: 0: c:0 t:1 1: c:0 t:1 2: c:0 t:1 3: c:0 t:1 Cull #version 100 // Driver: Mali-400 MP - GLSL 100 precision highp float; #define gl_VertexIndex gl_VertexID #define splat3(x) vec3(x) #define mul(x, y) ((x) * (y)) // 01f04444:00000b31 HWX T N LM Tex Light: 0: c:0 t:1 1: c:0 t:1 2: c:0 t:1 3: c:0 t:1 Cull attribute vec3 position; attribute mediump vec3 normal; attribute vec2 texcoord; uniform mat4 u_proj; uniform mat4 u_world; uniform mat4 u_view; uniform vec4 u_uvscaleoffset; uniform vec3 u_lightpos0; uniform mediump vec3 u_lightatt0; uniform lowp vec3 u_lightambient0; uniform lowp vec3 u_lightdiffuse0; uniform vec3 u_lightpos1; uniform mediump vec3 u_lightatt1; uniform lowp vec3 u_lightambient1; uniform lowp vec3 u_lightdiffuse1; uniform vec3 u_lightpos2; uniform mediump vec3 u_lightatt2; uniform lowp vec3 u_lightambient2; uniform lowp vec3 u_lightdiffuse2; uniform vec3 u_lightpos3; uniform mediump vec3 u_lightatt3; uniform lowp vec3 u_lightambient3; uniform lowp vec3 u_lightdiffuse3; uniform lowp vec4 u_ambient; uniform lowp vec3 u_matdiffuse; uniform lowp vec4 u_matspecular; uniform lowp vec3 u_matemissive; uniform lowp vec4 u_matambientalpha; uniform highp vec2 u_fogcoef; uniform highp vec4 u_depthRange; uniform highp vec4 u_cullRangeMin; uniform highp vec4 u_cullRangeMax; varying lowp vec4 v_color0; varying lowp vec3 v_color1; varying mediump vec3 v_texcoord; varying mediump float v_fogdepth; vec3 normalizeOr001(vec3 v) { return length(v) == 0.0 ? vec3(0.0, 0.0, 1.0) : normalize(v); } void main() { vec3 worldpos = mul(vec4(position, 1.0), u_world).xyz; mediump vec3 worldnormal = normalizeOr001(mul(vec4(normal, 0.0), u_world).xyz); vec4 viewPos = vec4(mul(vec4(worldpos, 1.0), u_view).xyz, 1.0); vec4 outPos = mul(u_proj, viewPos); vec4 ambientColor = u_matambientalpha; vec3 diffuseColor = u_matdiffuse.rgb; vec3 specularColor = u_matspecular.rgb; lowp vec4 lightSum0 = u_ambient * ambientColor + vec4(u_matemissive, 0.0); vec3 toLight; lowp vec3 diffuse; float distance; lowp float lightScale; mediump float ldot; toLight = u_lightpos0 - worldpos; distance = length(toLight); toLight /= distance; ldot = dot(toLight, worldnormal); lightScale = clamp(1.0 / dot(u_lightatt0, vec3(1.0, distance, distance*distance)), 0.0, 1.0); diffuse = (u_lightdiffuse0 * diffuseColor) * max(ldot, 0.0); lightSum0.rgb += (u_lightambient0 * ambientColor.rgb + diffuse) * lightScale; toLight = u_lightpos1 - worldpos; distance = length(toLight); toLight /= distance; ldot = dot(toLight, worldnormal); lightScale = clamp(1.0 / dot(u_lightatt1, vec3(1.0, distance, distance*distance)), 0.0, 1.0); diffuse = (u_lightdiffuse1 * diffuseColor) * max(ldot, 0.0); lightSum0.rgb += (u_lightambient1 * ambientColor.rgb + diffuse) * lightScale; toLight = u_lightpos2 - worldpos; distance = length(toLight); toLight /= distance; ldot = dot(toLight, worldnormal); lightScale = clamp(1.0 / dot(u_lightatt2, vec3(1.0, distance, distance*distance)), 0.0, 1.0); diffuse = (u_lightdiffuse2 * diffuseColor) * max(ldot, 0.0); lightSum0.rgb += (u_lightambient2 * ambientColor.rgb + diffuse) * lightScale; toLight = u_lightpos3 - worldpos; distance = length(toLight); toLight /= distance; ldot = dot(toLight, worldnormal); lightScale = clamp(1.0 / dot(u_lightatt3, vec3(1.0, distance, distance*distance)), 0.0, 1.0); diffuse = (u_lightdiffuse3 * diffuseColor) * max(ldot, 0.0); lightSum0.rgb += (u_lightambient3 * ambientColor.rgb + diffuse) * lightScale; v_color0 = clamp(lightSum0, 0.0, 1.0); v_color1 = splat3(0.0); v_texcoord = vec3(texcoord.xy * u_uvscaleoffset.xy, 0.0); v_fogdepth = (viewPos.z + u_fogcoef.x) * u_fogcoef.y; vec3 projPos = outPos.xyz / outPo 1 1 1 2023-01-24
Error in shader compilation: info: 0:1: F0002: Mali-400 GP register allocation failed for vertex shader. Please contact [email protected] with the shader causing the problem, along with this error message. Mali online shader compiler r10p0-00rel0 [Revision 96995]. 01f04440:00090b31 HWX T N LM Tex TexProjNNrm UVMtx Light: 0: c:0 t:0 1: c:0 t:1 2: c:0 t:1 3: c:0 t:1 Cull #version 100 // Driver: Mali-400 MP - GLSL 100 precision highp float; #define gl_VertexIndex gl_VertexID #define splat3(x) vec3(x) #define mul(x, y) ((x) * (y)) // 01f04440:00090b31 HWX T N LM Tex TexProjNNrm UVMtx Light: 0: c:0 t:0 1: c:0 t:1 2: c:0 t:1 3: c:0 t:1 Cull attribute vec3 position; attribute mediump vec3 normal; attribute vec2 texcoord; uniform mat4 u_proj; uniform mat4 u_world; uniform mat4 u_view; uniform mediump mat4 u_texmtx; uniform vec4 u_uvscaleoffset; uniform vec3 u_lightpos0; uniform lowp vec3 u_lightambient0; uniform lowp vec3 u_lightdiffuse0; uniform vec3 u_lightpos1; uniform mediump vec3 u_lightatt1; uniform lowp vec3 u_lightambient1; uniform lowp vec3 u_lightdiffuse1; uniform vec3 u_lightpos2; uniform mediump vec3 u_lightatt2; uniform lowp vec3 u_lightambient2; uniform lowp vec3 u_lightdiffuse2; uniform vec3 u_lightpos3; uniform mediump vec3 u_lightatt3; uniform lowp vec3 u_lightambient3; uniform lowp vec3 u_lightdiffuse3; uniform lowp vec4 u_ambient; uniform lowp vec3 u_matdiffuse; uniform lowp vec4 u_matspecular; uniform lowp vec3 u_matemissive; uniform lowp vec4 u_matambientalpha; uniform highp vec2 u_fogcoef; uniform highp vec4 u_depthRange; uniform highp vec4 u_cullRangeMin; uniform highp vec4 u_cullRangeMax; varying lowp vec4 v_color0; varying lowp vec3 v_color1; varying mediump vec3 v_texcoord; varying mediump float v_fogdepth; vec3 normalizeOr001(vec3 v) { return length(v) == 0.0 ? vec3(0.0, 0.0, 1.0) : normalize(v); } void main() { vec3 worldpos = mul(vec4(position, 1.0), u_world).xyz; mediump vec3 worldnormal = normalizeOr001(mul(vec4(normal, 0.0), u_world).xyz); vec4 viewPos = vec4(mul(vec4(worldpos, 1.0), u_view).xyz, 1.0); vec4 outPos = mul(u_proj, viewPos); vec4 ambientColor = u_matambientalpha; vec3 diffuseColor = u_matdiffuse.rgb; vec3 specularColor = u_matspecular.rgb; lowp vec4 lightSum0 = u_ambient * ambientColor + vec4(u_matemissive, 0.0); vec3 toLight; lowp vec3 diffuse; float distance; lowp float lightScale; mediump float ldot; toLight = u_lightpos0; ldot = dot(toLight, worldnormal); diffuse = (u_lightdiffuse0 * diffuseColor) * max(ldot, 0.0); lightSum0.rgb += (u_lightambient0 * ambientColor.rgb + diffuse); toLight = u_lightpos1 - worldpos; distance = length(toLight); toLight /= distance; ldot = dot(toLight, worldnormal); lightScale = clamp(1.0 / dot(u_lightatt1, vec3(1.0, distance, distance*distance)), 0.0, 1.0); diffuse = (u_lightdiffuse1 * diffuseColor) * max(ldot, 0.0); lightSum0.rgb += (u_lightambient1 * ambientColor.rgb + diffuse) * lightScale; toLight = u_lightpos2 - worldpos; distance = length(toLight); toLight /= distance; ldot = dot(toLight, worldnormal); lightScale = clamp(1.0 / dot(u_lightatt2, vec3(1.0, distance, distance*distance)), 0.0, 1.0); diffuse = (u_lightdiffuse2 * diffuseColor) * max(ldot, 0.0); lightSum0.rgb += (u_lightambient2 * ambientColor.rgb + diffuse) * lightScale; toLight = u_lightpos3 - worldpos; distance = length(toLight); toLight /= distance; ldot = dot(toLight, worldnormal); lightScale = clamp(1.0 / dot(u_lightatt3, vec3(1.0, distance, distance*distance)), 0.0, 1.0); diffuse = (u_lightdiffuse3 * diffuseColor) * max(ldot, 0.0); lightSum0.rgb += (u_lightambient3 * ambientColor.rgb + diffuse) * lightScale; v_color0 = clamp(lightSum0, 0.0, 1.0); v_color1 = splat3(0.0); v_texcoord = mul(length(normal) == 0.0 ? vec4(0.0, 0.0, 0.0, 1.0) : vec4(normalize(normal), 1.0), u_texmtx).xyz * vec3(u_uvscaleoffset.xy, 1.0); v_fogdepth = (viewPos.z + u_fogcoef.x) * u_fogcoef.y; vec3 projPos = outPos.xyz / outPos.w; float projZ = (projPos.z - u_depthRange.z) * u 1 1 1 2023-01-24
Error in shader compilation: info: 0:17: S0027: Cannot modify an input variable 00000000:00000002 THR #version 320 es // Mali-G57 MC2 - GLSL 320 precision highp float; #define gl_VertexIndex gl_VertexID #define splat3(x) vec3(x) #define mul(x, y) ((x) * (y)) in vec4 position; in lowp vec4 color0; uniform mat4 u_proj_through; out lowp vec4 v_color0; in float h_depth; void main() { v_color0 = color0; vec4 outPos = mul(u_proj_through, vec4(position.xyz, 1.0)); v_color0.rgb = vec3(0.0); gl_Position = outPos; h_depth = outPos.z/outPos.w; } 1 1 1 2023-01-23
Error in shader compilation: info: 0:32: S0027: Cannot modify an input variable 00000000:00000020 Cull #version 320 es // Mali-G57 MC2 - GLSL 320 precision highp float; #define gl_VertexIndex gl_VertexID #define splat3(x) vec3(x) #define mul(x, y) ((x) * (y)) in vec4 position; in lowp vec4 color0; uniform mat4 u_proj; uniform highp vec4 u_depthRange; uniform highp vec4 u_cullRangeMin; uniform highp vec4 u_cullRangeMax; out lowp vec4 v_color0; in float h_depth; void main() { v_color0 = color0; vec4 outPos = mul(u_proj, vec4(position.xyz, 1.0)); v_color0.rgb = vec3(0.0); vec3 projPos = outPos.xyz / outPos.w; float projZ = (projPos.z - u_depthRange.z) * u_depthRange.w; if (u_cullRangeMin.w <= 0.0 || projZ * outPos.w > -outPos.w) { if (projPos.x < u_cullRangeMin.x || projPos.y < u_cullRangeMin.y || projPos.x > u_cullRangeMax.x || projPos.y > u_cullRangeMax.y) { outPos.xyzw = u_cullRangeMax.wwww; } } if (u_cullRangeMin.w <= 0.0) { if (projPos.z < u_cullRangeMin.z || projPos.z > u_cullRangeMax.z) { outPos.xyzw = u_cullRangeMax.wwww; } } gl_Position = outPos; h_depth = outPos.z/outPos.w; } 1 1 1 2023-01-23
Error in shader compilation: info: 0:20: S0027: Cannot modify an input variable 00000000:0000001a THR C Tex #version 320 es // Mali-G57 MC2 - GLSL 320 precision highp float; #define gl_VertexIndex gl_VertexID #define splat3(x) vec3(x) #define mul(x, y) ((x) * (y)) in vec4 position; in vec2 texcoord; in lowp vec4 color0; uniform mat4 u_proj_through; out lowp vec4 v_color0; out mediump vec3 v_texcoord; in float h_depth; void main() { v_texcoord = vec3(texcoord, 1.0); v_color0 = color0; vec4 outPos = mul(u_proj_through, vec4(position.xyz, 1.0)); v_color0.rgb = vec3(0.0); gl_Position = outPos; h_depth = outPos.z/outPos.w; } 1 1 1 2023-01-23
Error in shader compilation: info: 0:20: S0027: Cannot modify an input variable 00000000:00000012 THR Tex #version 320 es // Mali-G57 MC2 - GLSL 320 precision highp float; #define gl_VertexIndex gl_VertexID #define splat3(x) vec3(x) #define mul(x, y) ((x) * (y)) in vec4 position; in vec2 texcoord; in lowp vec4 color0; uniform mat4 u_proj_through; out lowp vec4 v_color0; out mediump vec3 v_texcoord; in float h_depth; void main() { v_texcoord = vec3(texcoord, 1.0); v_color0 = color0; vec4 outPos = mul(u_proj_through, vec4(position.xyz, 1.0)); v_color0.rgb = vec3(0.0); gl_Position = outPos; h_depth = outPos.z/outPos.w; } 1 1 1 2023-01-23
Error in shader compilation: info: 0:35: S0027: Cannot modify an input variable 00000000:00000030 Tex Cull #version 320 es // Mali-G57 MC2 - GLSL 320 precision highp float; #define gl_VertexIndex gl_VertexID #define splat3(x) vec3(x) #define mul(x, y) ((x) * (y)) in vec4 position; in vec2 texcoord; in lowp vec4 color0; uniform mat4 u_proj; uniform highp vec4 u_depthRange; uniform highp vec4 u_cullRangeMin; uniform highp vec4 u_cullRangeMax; out lowp vec4 v_color0; out mediump vec3 v_texcoord; in float h_depth; void main() { v_texcoord = vec3(texcoord, 1.0); v_color0 = color0; vec4 outPos = mul(u_proj, vec4(position.xyz, 1.0)); v_color0.rgb = vec3(0.0); vec3 projPos = outPos.xyz / outPos.w; float projZ = (projPos.z - u_depthRange.z) * u_depthRange.w; if (u_cullRangeMin.w <= 0.0 || projZ * outPos.w > -outPos.w) { if (projPos.x < u_cullRangeMin.x || projPos.y < u_cullRangeMin.y || projPos.x > u_cullRangeMax.x || projPos.y > u_cullRangeMax.y) { outPos.xyzw = u_cullRangeMax.wwww; } } if (u_cullRangeMin.w <= 0.0) { if (projPos.z < u_cullRangeMin.z || projPos.z > u_cullRangeMax.z) { outPos.xyzw = u_cullRangeMax.wwww; } } gl_Position = outPos; h_depth = outPos.z/outPos.w; } 1 1 1 2023-01-23
Error in shader compilation: info: 0:35: S0027: Cannot modify an input variable 00000000:00000038 C Tex Cull #version 320 es // Mali-G57 MC2 - GLSL 320 precision highp float; #define gl_VertexIndex gl_VertexID #define splat3(x) vec3(x) #define mul(x, y) ((x) * (y)) in vec4 position; in vec2 texcoord; in lowp vec4 color0; uniform mat4 u_proj; uniform highp vec4 u_depthRange; uniform highp vec4 u_cullRangeMin; uniform highp vec4 u_cullRangeMax; out lowp vec4 v_color0; out mediump vec3 v_texcoord; in float h_depth; void main() { v_texcoord = vec3(texcoord, 1.0); v_color0 = color0; vec4 outPos = mul(u_proj, vec4(position.xyz, 1.0)); v_color0.rgb = vec3(0.0); vec3 projPos = outPos.xyz / outPos.w; float projZ = (projPos.z - u_depthRange.z) * u_depthRange.w; if (u_cullRangeMin.w <= 0.0 || projZ * outPos.w > -outPos.w) { if (projPos.x < u_cullRangeMin.x || projPos.y < u_cullRangeMin.y || projPos.x > u_cullRangeMax.x || projPos.y > u_cullRangeMax.y) { outPos.xyzw = u_cullRangeMax.wwww; } } if (u_cullRangeMin.w <= 0.0) { if (projPos.z < u_cullRangeMin.z || projPos.z > u_cullRangeMax.z) { outPos.xyzw = u_cullRangeMax.wwww; } } gl_Position = outPos; h_depth = outPos.z/outPos.w; } 1 1 1 2023-01-23
Error in shader compilation: info: 0:17: S0027: Cannot modify an input variable 00000000:0000000a THR C #version 320 es // Mali-G57 MC2 - GLSL 320 precision highp float; #define gl_VertexIndex gl_VertexID #define splat3(x) vec3(x) #define mul(x, y) ((x) * (y)) in vec4 position; in lowp vec4 color0; uniform mat4 u_proj_through; out lowp vec4 v_color0; in float h_depth; void main() { v_color0 = color0; vec4 outPos = mul(u_proj_through, vec4(position.xyz, 1.0)); v_color0.rgb = vec3(0.0); gl_Position = outPos; h_depth = outPos.z/outPos.w; } 1 1 1 2023-01-23
Error in shader compilation: info: postshader // Simple vignette shader - darker towards the corners like in the unprocessed output of a real camera. #ifdef GL_ES precision mediump float; precision mediump int; #endif uniform sampler2D sampler0; varying vec2 v_texcoord0; void main() { float vignette = 1.1 - 0.6 * (dot(v_texcoord0 - 0.5, v_texcoord0 - 0.5) * 2.0); vec3 rgb = texture2D(sampler0, v_texcoord0.xy).xyz; gl_FragColor.rgb = vignette * rgb; gl_FragColor.a = 1.0; } 1 1 1 2023-01-23
Error in shader compilation: info: WARNING: 0:21: 'texture2D' : function is deprecated in current GLSL version ERROR: 0:22: 'fmod' : no matching overloaded function found (using implicit conversion) WARNING: 0:23: 'texture2D' : function is deprecated in current GLSL version depal #version 100 // Driver: Adreno (TM) 650 - GLSL 100 #define DISCARD discard precision lowp float; #define splat3(x) vec3(x) #define mul(x, y) ((x) * (y)) uniform sampler2D tex; uniform sampler2D pal; precision highp float; varying highp vec2 v_texcoord; // TEXCOORD0 void main() { vec4 index = texture2D(tex, v_texcoord); float coord = (fmod(index.r * 15.995000, 16.0) * 0.001953) + 0.000977; vec4 outColor = texture2D(pal, vec2(coord, 0.0)); gl_FragColor = outColor; } 1 1 1 2023-01-16
Error in shader compilation: info: 0:1: F0002: Mali-400 GP register allocation failed for vertex shader. Please contact [email protected] with the shader causing the problem, along with this error message. Mali online shader compiler r10p0-00rel0 [Revision 96995]. 01730544:00000b39 HWX C T N LM Tex Light: 0: c:0 t:1 1: c:0 t:1 2: c:1 t:1 MatUp:3 Cull #version 100 // Driver: Mali-400 MP - GLSL 100 precision highp float; #define gl_VertexIndex gl_VertexID #define splat3(x) vec3(x) #define mul(x, y) ((x) * (y)) // 01730544:00000b39 HWX C T N LM Tex Light: 0: c:0 t:1 1: c:0 t:1 2: c:1 t:1 MatUp:3 Cull attribute vec3 position; attribute mediump vec3 normal; attribute vec2 texcoord; attribute lowp vec4 color0; uniform mat4 u_proj; uniform mat4 u_world; uniform mat4 u_view; uniform vec4 u_uvscaleoffset; uniform vec3 u_lightpos0; uniform mediump vec3 u_lightatt0; uniform lowp vec3 u_lightambient0; uniform lowp vec3 u_lightdiffuse0; uniform vec3 u_lightpos1; uniform mediump vec3 u_lightatt1; uniform lowp vec3 u_lightambient1; uniform lowp vec3 u_lightdiffuse1; uniform vec3 u_lightpos2; uniform mediump vec3 u_lightatt2; uniform lowp vec3 u_lightambient2; uniform lowp vec3 u_lightdiffuse2; uniform lowp vec3 u_lightspecular2; uniform lowp vec4 u_ambient; uniform lowp vec4 u_matspecular; uniform lowp vec3 u_matemissive; uniform lowp vec4 u_matambientalpha; uniform highp vec2 u_fogcoef; uniform highp vec4 u_depthRange; uniform highp vec4 u_cullRangeMin; uniform highp vec4 u_cullRangeMax; varying lowp vec4 v_color0; varying lowp vec3 v_color1; varying mediump vec3 v_texcoord; varying mediump float v_fogdepth; vec3 normalizeOr001(vec3 v) { return length(v) == 0.0 ? vec3(0.0, 0.0, 1.0) : normalize(v); } void main() { vec3 worldpos = mul(vec4(position, 1.0), u_world).xyz; mediump vec3 worldnormal = normalizeOr001(mul(vec4(normal, 0.0), u_world).xyz); vec4 viewPos = vec4(mul(vec4(worldpos, 1.0), u_view).xyz, 1.0); vec4 outPos = mul(u_proj, viewPos); vec4 ambientColor = color0; vec3 diffuseColor = color0.rgb; vec3 specularColor = u_matspecular.rgb; lowp vec4 lightSum0 = u_ambient * ambientColor + vec4(u_matemissive, 0.0); lowp vec3 lightSum1 = splat3(0.0); vec3 toLight; lowp vec3 diffuse; float distance; lowp float lightScale; mediump float ldot; toLight = u_lightpos0 - worldpos; distance = length(toLight); toLight /= distance; ldot = dot(toLight, worldnormal); lightScale = clamp(1.0 / dot(u_lightatt0, vec3(1.0, distance, distance*distance)), 0.0, 1.0); diffuse = (u_lightdiffuse0 * diffuseColor) * max(ldot, 0.0); lightSum0.rgb += (u_lightambient0 * ambientColor.rgb + diffuse) * lightScale; toLight = u_lightpos1 - worldpos; distance = length(toLight); toLight /= distance; ldot = dot(toLight, worldnormal); lightScale = clamp(1.0 / dot(u_lightatt1, vec3(1.0, distance, distance*distance)), 0.0, 1.0); diffuse = (u_lightdiffuse1 * diffuseColor) * max(ldot, 0.0); lightSum0.rgb += (u_lightambient1 * ambientColor.rgb + diffuse) * lightScale; toLight = u_lightpos2 - worldpos; distance = length(toLight); toLight /= distance; ldot = dot(toLight, worldnormal); lightScale = clamp(1.0 / dot(u_lightatt2, vec3(1.0, distance, distance*distance)), 0.0, 1.0); diffuse = (u_lightdiffuse2 * diffuseColor) * max(ldot, 0.0); if (ldot >= 0.0) { ldot = dot(normalize(toLight + vec3(0.0, 0.0, 1.0)), worldnormal); if (u_matspecular.a <= 0.0) { ldot = 1.0; } else { ldot = pow(max(ldot, 0.0), u_matspecular.a); } if (ldot > 0.0) lightSum1 += u_lightspecular2 * specularColor * ldot * lightScale; } lightSum0.rgb += (u_lightambient2 * ambientColor.rgb + diffuse) * lightScale; v_color0 = clamp(lightSum0, 0.0, 1.0); v_color1 = clamp(lightSum1, 0.0, 1.0); v_texcoord = vec3(texcoord.xy * u_uvscaleoffset.xy, 0.0); v_fogdepth = (viewPos.z + u_fogcoef.x) * u_fogcoef.y; vec3 projPos = outPos.xyz / outPos.w; float projZ = (projPos.z - u_depthRange.z) * u_depthRange.w; if (u_cullRangeMin.w <= 0.0 || projZ * outPos.w 1 1 1 2023-01-16
Error in shader compilation: info: Vertex shader compilation failed. ERROR: 0:64: '!=' : wrong operand types no operation '!=' exists that takes a left-hand operand of type 'uint' and a right operand of type 'const int' (or there is no acceptable conversion) ERROR: 0:65: '!=' : wrong operand types no operation '!=' exists that takes a left-hand operand of type 'uint' and a right operand of type 'const int' (or there is no acceptable conversion) ERROR: 0:66: '!=' : wrong operand types no operation '!=' exists that takes a left-hand operand of type 'uint' and a right operand of type 'const int' (or there is no acceptable conversion) ERROR: 0:75: '!=' : wrong operand types no operation '!=' exists that takes a left-hand operand of type 'uint' and a right operand of type 'const int' (or there is no acceptable conversion) ERROR: 0:78: '==' : wrong operand types no operation '==' exists that takes a left-hand operand of type 'uint' and a right operand of type 'const int' (or there is no acceptable conversion) ERROR: 0:124: '!=' : wrong o 01000000:80000918 HWX C T Tex Light: LightUberShader #version 300 es // Driver: Adreno (TM) 305 - GLSL 300 precision highp float; #define gl_VertexIndex gl_VertexID #define splat3(x) vec3(x) #define mul(x, y) ((x) * (y)) // 01000000:80000918 HWX C T Tex Light: LightUberShader in vec3 position; in vec2 texcoord; in lowp vec4 color0; uniform mat4 u_proj; uniform mat4 u_world; uniform mat4 u_view; uniform vec4 u_uvscaleoffset; uniform uint u_lightControl; uniform vec3 u_lightpos0; uniform mediump vec3 u_lightatt0; uniform mediump vec3 u_lightdir0; uniform mediump vec2 u_lightangle_spotCoef0; uniform lowp vec3 u_lightambient0; uniform lowp vec3 u_lightdiffuse0; uniform lowp vec3 u_lightspecular0; uniform vec3 u_lightpos1; uniform mediump vec3 u_lightatt1; uniform mediump vec3 u_lightdir1; uniform mediump vec2 u_lightangle_spotCoef1; uniform lowp vec3 u_lightambient1; uniform lowp vec3 u_lightdiffuse1; uniform lowp vec3 u_lightspecular1; uniform vec3 u_lightpos2; uniform mediump vec3 u_lightatt2; uniform mediump vec3 u_lightdir2; uniform mediump vec2 u_lightangle_spotCoef2; uniform lowp vec3 u_lightambient2; uniform lowp vec3 u_lightdiffuse2; uniform lowp vec3 u_lightspecular2; uniform vec3 u_lightpos3; uniform mediump vec3 u_lightatt3; uniform mediump vec3 u_lightdir3; uniform mediump vec2 u_lightangle_spotCoef3; uniform lowp vec3 u_lightambient3; uniform lowp vec3 u_lightdiffuse3; uniform lowp vec3 u_lightspecular3; uniform lowp vec4 u_ambient; uniform lowp vec3 u_matdiffuse; uniform lowp vec4 u_matspecular; uniform lowp vec3 u_matemissive; uniform lowp vec4 u_matambientalpha; uniform highp vec2 u_fogcoef; uniform highp vec4 u_depthRange; uniform highp vec4 u_cullRangeMin; uniform highp vec4 u_cullRangeMax; out lowp vec4 v_color0; out mediump vec3 v_texcoord; out mediump float v_fogdepth; vec3 normalizeOr001(vec3 v) { return length(v) == 0.0 ? vec3(0.0, 0.0, 1.0) : normalize(v); } void main() { vec3 worldpos = mul(vec4(position, 1.0), u_world).xyz; mediump vec3 worldnormal = normalizeOr001(mul(vec4(0.0, 0.0, 1.0, 0.0), u_world).xyz); vec4 viewPos = vec4(mul(vec4(worldpos, 1.0), u_view).xyz, 1.0); vec4 outPos = mul(u_proj, viewPos); vec4 ambientColor = ((u_lightControl & (1u << 20u)) != 0u) ? color0 : u_matambientalpha; vec3 diffuseColor = ((u_lightControl & (1u << 21u)) != 0u) ? color0.rgb : u_matdiffuse; vec3 specularColor = ((u_lightControl & (1u << 22u)) != 0u) ? color0.rgb : u_matspecular.rgb; lowp vec4 lightSum0 = u_ambient * ambientColor + vec4(u_matemissive, 0.0); lowp vec3 lightSum1 = splat3(0.0); vec3 toLight; lowp vec3 diffuse; float distance; lowp float lightScale; mediump float ldot; lowp float angle; if ((u_lightControl & 1u) != 0u) { uint comp = (u_lightControl >> 4) & 3u; uint type = (u_lightControl >> 6) & 3u; if (type == 0u) { toLight = u_lightpos0; } else { toLight = u_lightpos0 - worldpos; distance = length(toLight); toLight /= distance; } ldot = dot(toLight, worldnormal); if (c 1 1 1 2023-01-16
Error in shader compilation: info: 0:1: F0002: Mali-400 GP register allocation failed for vertex shader. Please contact [email protected] with the shader causing the problem, along with this error message. Mali online shader compiler r10p0-00rel0 [Revision 96995]. 01f10444:00090b34 HWX T N Fog Tex TexProjNNrm UVMtx Light: 0: c:0 t:1 1: c:0 t:1 2: c:0 t:1 3: c:0 t:0 MatUp:1 Cull #version 100 // Mali-400 MP - GLSL 100 precision highp float; #define gl_VertexIndex gl_VertexID #define splat3(x) vec3(x) #define mul(x, y) ((x) * (y)) attribute vec3 position; attribute mediump vec3 normal; attribute vec2 texcoord; uniform mat4 u_proj; uniform mat4 u_world; uniform mat4 u_view; uniform mediump mat4 u_texmtx; uniform vec4 u_uvscaleoffset; uniform vec3 u_lightpos0; uniform mediump vec3 u_lightatt0; uniform lowp vec3 u_lightambient0; uniform lowp vec3 u_lightdiffuse0; uniform vec3 u_lightpos1; uniform mediump vec3 u_lightatt1; uniform lowp vec3 u_lightambient1; uniform lowp vec3 u_lightdiffuse1; uniform vec3 u_lightpos2; uniform mediump vec3 u_lightatt2; uniform lowp vec3 u_lightambient2; uniform lowp vec3 u_lightdiffuse2; uniform vec3 u_lightpos3; uniform lowp vec3 u_lightambient3; uniform lowp vec3 u_lightdiffuse3; uniform lowp vec4 u_ambient; uniform lowp vec3 u_matdiffuse; uniform lowp vec4 u_matspecular; uniform lowp vec3 u_matemissive; uniform lowp vec4 u_matambientalpha; uniform highp vec2 u_fogcoef; uniform highp vec4 u_depthRange; uniform highp vec4 u_cullRangeMin; uniform highp vec4 u_cullRangeMax; varying lowp vec4 v_color0; varying mediump vec3 v_texcoord; varying mediump float v_fogdepth; vec3 normalizeOr001(vec3 v) { return length(v) == 0.0 ? vec3(0.0, 0.0, 1.0) : normalize(v); } void main() { vec3 worldpos = mul(vec4(position, 1.0), u_world).xyz; mediump vec3 worldnormal = normalizeOr001(mul(vec4(normal, 0.0), u_world).xyz); vec4 viewPos = vec4(mul(vec4(worldpos, 1.0), u_view).xyz, 1.0); vec4 outPos = mul(u_proj, viewPos); lowp vec4 lightSum0 = u_ambient * u_matambientalpha + vec4(u_matemissive, 0.0); vec3 toLight; lowp vec3 diffuse; float distance; lowp float lightScale; mediump float ldot; toLight = u_lightpos0 - worldpos; distance = length(toLight); toLight /= distance; ldot = dot(toLight, worldnormal); lightScale = clamp(1.0 / dot(u_lightatt0, vec3(1.0, distance, distance*distance)), 0.0, 1.0); diffuse = (u_lightdiffuse0 * u_matdiffuse) * max(ldot, 0.0); lightSum0.rgb += (u_lightambient0 * u_matambientalpha.rgb + diffuse) * lightScale; toLight = u_lightpos1 - worldpos; distance = length(toLight); toLight /= distance; ldot = dot(toLight, worldnormal); lightScale = clamp(1.0 / dot(u_lightatt1, vec3(1.0, distance, distance*distance)), 0.0, 1.0); diffuse = (u_lightdiffuse1 * u_matdiffuse) * max(ldot, 0.0); lightSum0.rgb += (u_lightambient1 * u_matambientalpha.rgb + diffuse) * lightScale; toLight = u_lightpos2 - worldpos; distance = length(toLight); toLight /= distance; ldot = dot(toLight, worldnormal); lightScale = clamp(1.0 / dot(u_lightatt2, vec3(1.0, distance, distance*distance)), 0.0, 1.0); diffuse = (u_lightdiffuse2 * u_matdiffuse) * max(ldot, 0.0); lightSum0.rgb += (u_lightambient2 * u_matambientalpha.rgb + diffuse) * lightScale; toLight = u_lightpos3; ldot = dot(toLight, worldnormal); diffuse = (u_lightdiffuse3 * u_matdiffuse) * max(ldot, 0.0); lightSum0.rgb += (u_lightambient3 * u_matambientalpha.rgb + diffuse); v_color0 = clamp(lightSum0, 0.0, 1.0); v_texcoord = mul(length(normal) == 0.0 ? vec4(0.0, 0.0, 1.0, 1.0) : vec4(normalize(normal), 1.0), u_texmtx).xyz * vec3(u_uvscaleoffset.xy, 1.0); v_fogdepth = (viewPos.z + u_fogcoef.x) * u_fogcoef.y; vec3 projPos = outPos.xyz / outPos.w; float projZ = (projPos.z - u_depthRange.z) * u_depthRange.w; if (u_cullRangeMin.w <= 0.0 || projZ * outPos.w > -outPos.w) { if (projPos.x < u_cullRangeMin.x || projPos.y < u_cullRangeMin.y || projPos.x > u_cullRangeMax.x || projPos.y > u_cullRangeMax.y) { outPos.xyzw = u_cullRangeMax.wwww; } 1 1 1 2023-01-16
Error in shader compilation: info: ERROR: 0:80: 'assign' : l-value required "h_normal" (can't modify an attribute) ERROR: 1 compilation errors. No code generated. 03170000:41000b3d HWX C T N LM Fog Tex Bones:5 Light: 0: c:0 t:0 MatUp:7 WScale 1 Cull #version 320 es #extension GL_EXT_clip_cull_distance : enable // Adreno (TM) 512 - GLSL 320 precision highp float; #define gl_VertexIndex gl_VertexID #define splat3(x) vec3(x) #define mul(x, y) ((x) * (y)) in mediump vec4 w1; in mediump float w2; in vec3 position; in mediump vec3 normal; in vec2 texcoord; in lowp vec4 color0; uniform mat4 u_proj; uniform mat4 u_world; uniform mat4 u_view; uniform mat4 u_bone0; uniform mat4 u_bone1; uniform mat4 u_bone2; uniform mat4 u_bone3; uniform mat4 u_bone4; uniform vec4 u_uvscaleoffset; uniform vec3 u_lightpos0; uniform lowp vec3 u_lightambient0; uniform lowp vec3 u_lightdiffuse0; uniform lowp vec4 u_ambient; uniform lowp vec4 u_matspecular; uniform lowp vec3 u_matemissive; uniform lowp vec4 u_matambientalpha; uniform highp vec2 u_fogcoef; uniform highp vec4 u_depthRange; uniform highp vec4 u_cullRangeMin; uniform highp vec4 u_cullRangeMax; out lowp vec4 v_color0; out lowp vec3 v_color1; out mediump vec3 v_texcoord; out mediump float v_fogdepth; in vec3 h_normal; vec3 normalizeOr001(vec3 v) { return length(v) == 0.0 ? vec3(0.0, 0.0, 1.0) : normalize(v); } void main() { mat4 skinMatrix = mul(w1.x, u_bone0) + mul(w1.y, u_bone1) + mul(w1.z, u_bone2) + mul(w1.w, u_bone3) + mul(w2, u_bone4); vec3 skinnedpos = mul(vec4(position, 1.0), skinMatrix).xyz * 1.9921875; vec3 worldpos = mul(vec4(skinnedpos, 1.0), u_world).xyz; mediump vec3 skinnednormal = mul(vec4(normal, 0.0), skinMatrix).xyz * 1.9921875; mediump vec3 worldnormal = normalizeOr001(mul(vec4(skinnednormal, 0.0), u_world).xyz); vec4 viewPos = vec4(mul(vec4(worldpos, 1.0), u_view).xyz, 1.0); vec4 outPos = mul(u_proj, viewPos); lowp vec4 lightSum0 = u_ambient * color0 + vec4(u_matemissive, 0.0); vec3 toLight; lowp vec3 diffuse; mediump float ldot; toLight = u_lightpos0; ldot = dot(toLight, worldnormal); diffuse = (u_lightdiffuse0 * color0.rgb) * max(ldot, 0.0); lightSum0.rgb += (u_lightambient0 * color0.rgb + diffuse); v_color0 = clamp(lightSum0, 0.0, 1.0); v_color1 = splat3(0.0); v_texcoord = vec3(texcoord.xy * u_uvscaleoffset.xy, 0.0); v_fogdepth = (viewPos.z + u_fogcoef.x) * u_fogcoef.y; vec3 projPos = outPos.xyz / outPos.w; float projZ = (projPos.z - u_depthRange.z) * u_depthRange.w; if (u_cullRangeMin.w <= 0.0 || projZ * outPos.w > -outPos.w) { if (projPos.x < u_cullRangeMin.x || projPos.y < u_cullRangeMin.y || projPos.x > u_cullRangeMax.x || projPos.y > u_cullRangeMax.y) { outPos.xyzw = u_cullRangeMax.wwww; } } if (u_cullRangeMin.w <= 0.0) { if (projPos.z < u_cullRangeMin.z || projPos.z > u_cullRangeMax.z) { outPos.xyzw = u_cullRangeMax.wwww; } } gl_ClipDistance[0] = projZ * outPos.w + outPos.w; if (u_cullRangeMin.w > 0.0) { gl_CullDistance[0] = projPos.z - u_cullRangeMin.z; gl_CullDistance[1] = u_cullRangeMax.z - projPos.z; } gl_Position = outPos; h_normal = worldnormal*0.5+0.5; } 1 1 1 2023-01-15
Error in shader compilation: info: ERROR: 0:78: 'assign' : l-value required "h_normal" (can't modify an attribute) ERROR: 1 compilation errors. No code generated. 03170000:40c00b3d HWX C T N LM Fog Tex Bones:4 Light: 0: c:0 t:0 MatUp:7 WScale 1 Cull #version 320 es #extension GL_EXT_clip_cull_distance : enable // Adreno (TM) 512 - GLSL 320 precision highp float; #define gl_VertexIndex gl_VertexID #define splat3(x) vec3(x) #define mul(x, y) ((x) * (y)) in mediump vec4 w1; in vec3 position; in mediump vec3 normal; in vec2 texcoord; in lowp vec4 color0; uniform mat4 u_proj; uniform mat4 u_world; uniform mat4 u_view; uniform mat4 u_bone0; uniform mat4 u_bone1; uniform mat4 u_bone2; uniform mat4 u_bone3; uniform vec4 u_uvscaleoffset; uniform vec3 u_lightpos0; uniform lowp vec3 u_lightambient0; uniform lowp vec3 u_lightdiffuse0; uniform lowp vec4 u_ambient; uniform lowp vec4 u_matspecular; uniform lowp vec3 u_matemissive; uniform lowp vec4 u_matambientalpha; uniform highp vec2 u_fogcoef; uniform highp vec4 u_depthRange; uniform highp vec4 u_cullRangeMin; uniform highp vec4 u_cullRangeMax; out lowp vec4 v_color0; out lowp vec3 v_color1; out mediump vec3 v_texcoord; out mediump float v_fogdepth; in vec3 h_normal; vec3 normalizeOr001(vec3 v) { return length(v) == 0.0 ? vec3(0.0, 0.0, 1.0) : normalize(v); } void main() { mat4 skinMatrix = mul(w1.x, u_bone0) + mul(w1.y, u_bone1) + mul(w1.z, u_bone2) + mul(w1.w, u_bone3); vec3 skinnedpos = mul(vec4(position, 1.0), skinMatrix).xyz * 1.9921875; vec3 worldpos = mul(vec4(skinnedpos, 1.0), u_world).xyz; mediump vec3 skinnednormal = mul(vec4(normal, 0.0), skinMatrix).xyz * 1.9921875; mediump vec3 worldnormal = normalizeOr001(mul(vec4(skinnednormal, 0.0), u_world).xyz); vec4 viewPos = vec4(mul(vec4(worldpos, 1.0), u_view).xyz, 1.0); vec4 outPos = mul(u_proj, viewPos); lowp vec4 lightSum0 = u_ambient * color0 + vec4(u_matemissive, 0.0); vec3 toLight; lowp vec3 diffuse; mediump float ldot; toLight = u_lightpos0; ldot = dot(toLight, worldnormal); diffuse = (u_lightdiffuse0 * color0.rgb) * max(ldot, 0.0); lightSum0.rgb += (u_lightambient0 * color0.rgb + diffuse); v_color0 = clamp(lightSum0, 0.0, 1.0); v_color1 = splat3(0.0); v_texcoord = vec3(texcoord.xy * u_uvscaleoffset.xy, 0.0); v_fogdepth = (viewPos.z + u_fogcoef.x) * u_fogcoef.y; vec3 projPos = outPos.xyz / outPos.w; float projZ = (projPos.z - u_depthRange.z) * u_depthRange.w; if (u_cullRangeMin.w <= 0.0 || projZ * outPos.w > -outPos.w) { if (projPos.x < u_cullRangeMin.x || projPos.y < u_cullRangeMin.y || projPos.x > u_cullRangeMax.x || projPos.y > u_cullRangeMax.y) { outPos.xyzw = u_cullRangeMax.wwww; } } if (u_cullRangeMin.w <= 0.0) { if (projPos.z < u_cullRangeMin.z || projPos.z > u_cullRangeMax.z) { outPos.xyzw = u_cullRangeMax.wwww; } } gl_ClipDistance[0] = projZ * outPos.w + outPos.w; if (u_cullRangeMin.w > 0.0) { gl_CullDistance[0] = projPos.z - u_cullRangeMin.z; gl_CullDistance[1] = u_cullRangeMax.z - projPos.z; } gl_Position = outPos; h_normal = worldnormal*0.5+0.5; } 1 1 1 2023-01-15
Error in shader compilation: info: ERROR: 0:82: 'assign' : l-value required "h_normal" (can't modify an attribute) ERROR: 1 compilation errors. No code generated. 03170000:41800b3d HWX C T N LM Fog Tex Bones:7 Light: 0: c:0 t:0 MatUp:7 WScale 1 Cull #version 320 es #extension GL_EXT_clip_cull_distance : enable // Adreno (TM) 512 - GLSL 320 precision highp float; #define gl_VertexIndex gl_VertexID #define splat3(x) vec3(x) #define mul(x, y) ((x) * (y)) in mediump vec4 w1; in mediump vec3 w2; in vec3 position; in mediump vec3 normal; in vec2 texcoord; in lowp vec4 color0; uniform mat4 u_proj; uniform mat4 u_world; uniform mat4 u_view; uniform mat4 u_bone0; uniform mat4 u_bone1; uniform mat4 u_bone2; uniform mat4 u_bone3; uniform mat4 u_bone4; uniform mat4 u_bone5; uniform mat4 u_bone6; uniform vec4 u_uvscaleoffset; uniform vec3 u_lightpos0; uniform lowp vec3 u_lightambient0; uniform lowp vec3 u_lightdiffuse0; uniform lowp vec4 u_ambient; uniform lowp vec4 u_matspecular; uniform lowp vec3 u_matemissive; uniform lowp vec4 u_matambientalpha; uniform highp vec2 u_fogcoef; uniform highp vec4 u_depthRange; uniform highp vec4 u_cullRangeMin; uniform highp vec4 u_cullRangeMax; out lowp vec4 v_color0; out lowp vec3 v_color1; out mediump vec3 v_texcoord; out mediump float v_fogdepth; in vec3 h_normal; vec3 normalizeOr001(vec3 v) { return length(v) == 0.0 ? vec3(0.0, 0.0, 1.0) : normalize(v); } void main() { mat4 skinMatrix = mul(w1.x, u_bone0) + mul(w1.y, u_bone1) + mul(w1.z, u_bone2) + mul(w1.w, u_bone3) + mul(w2.x, u_bone4) + mul(w2.y, u_bone5) + mul(w2.z, u_bone6); vec3 skinnedpos = mul(vec4(position, 1.0), skinMatrix).xyz * 1.9921875; vec3 worldpos = mul(vec4(skinnedpos, 1.0), u_world).xyz; mediump vec3 skinnednormal = mul(vec4(normal, 0.0), skinMatrix).xyz * 1.9921875; mediump vec3 worldnormal = normalizeOr001(mul(vec4(skinnednormal, 0.0), u_world).xyz); vec4 viewPos = vec4(mul(vec4(worldpos, 1.0), u_view).xyz, 1.0); vec4 outPos = mul(u_proj, viewPos); lowp vec4 lightSum0 = u_ambient * color0 + vec4(u_matemissive, 0.0); vec3 toLight; lowp vec3 diffuse; mediump float ldot; toLight = u_lightpos0; ldot = dot(toLight, worldnormal); diffuse = (u_lightdiffuse0 * color0.rgb) * max(ldot, 0.0); lightSum0.rgb += (u_lightambient0 * color0.rgb + diffuse); v_color0 = clamp(lightSum0, 0.0, 1.0); v_color1 = splat3(0.0); v_texcoord = vec3(texcoord.xy * u_uvscaleoffset.xy, 0.0); v_fogdepth = (viewPos.z + u_fogcoef.x) * u_fogcoef.y; vec3 projPos = outPos.xyz / outPos.w; float projZ = (projPos.z - u_depthRange.z) * u_depthRange.w; if (u_cullRangeMin.w <= 0.0 || projZ * outPos.w > -outPos.w) { if (projPos.x < u_cullRangeMin.x || projPos.y < u_cullRangeMin.y || projPos.x > u_cullRangeMax.x || projPos.y > u_cullRangeMax.y) { outPos.xyzw = u_cullRangeMax.wwww; } } if (u_cullRangeMin.w <= 0.0) { if (projPos.z < u_cullRangeMin.z || projPos.z > u_cullRangeMax.z) { outPos.xyzw = u_cullRangeMax.wwww; } } gl_ClipDistance[0] = projZ * outPos.w + outPos.w; if (u_cullRangeMin.w > 0.0) { gl_CullDistance[0] = projPos.z - u_cullRangeMin.z; gl_CullDistance[1] = u_cullRangeMax.z - projPos.z; } gl_Position = outPos; h_normal = worldnormal*0.5+0.5; } 1 1 1 2023-01-15
Error in shader compilation: info: ERROR: 0:82: 'assign' : l-value required "h_normal" (can't modify an attribute) ERROR: 1 compilation errors. No code generated. 03170000:41c00b3d HWX C T N LM Fog Tex Bones:8 Light: 0: c:0 t:0 MatUp:7 WScale 1 Cull #version 320 es #extension GL_EXT_clip_cull_distance : enable // Adreno (TM) 512 - GLSL 320 precision highp float; #define gl_VertexIndex gl_VertexID #define splat3(x) vec3(x) #define mul(x, y) ((x) * (y)) in mediump vec4 w1, w2; in vec3 position; in mediump vec3 normal; in vec2 texcoord; in lowp vec4 color0; uniform mat4 u_proj; uniform mat4 u_world; uniform mat4 u_view; uniform mat4 u_bone0; uniform mat4 u_bone1; uniform mat4 u_bone2; uniform mat4 u_bone3; uniform mat4 u_bone4; uniform mat4 u_bone5; uniform mat4 u_bone6; uniform mat4 u_bone7; uniform vec4 u_uvscaleoffset; uniform vec3 u_lightpos0; uniform lowp vec3 u_lightambient0; uniform lowp vec3 u_lightdiffuse0; uniform lowp vec4 u_ambient; uniform lowp vec4 u_matspecular; uniform lowp vec3 u_matemissive; uniform lowp vec4 u_matambientalpha; uniform highp vec2 u_fogcoef; uniform highp vec4 u_depthRange; uniform highp vec4 u_cullRangeMin; uniform highp vec4 u_cullRangeMax; out lowp vec4 v_color0; out lowp vec3 v_color1; out mediump vec3 v_texcoord; out mediump float v_fogdepth; in vec3 h_normal; vec3 normalizeOr001(vec3 v) { return length(v) == 0.0 ? vec3(0.0, 0.0, 1.0) : normalize(v); } void main() { mat4 skinMatrix = mul(w1.x, u_bone0) + mul(w1.y, u_bone1) + mul(w1.z, u_bone2) + mul(w1.w, u_bone3) + mul(w2.x, u_bone4) + mul(w2.y, u_bone5) + mul(w2.z, u_bone6) + mul(w2.w, u_bone7); vec3 skinnedpos = mul(vec4(position, 1.0), skinMatrix).xyz * 1.9921875; vec3 worldpos = mul(vec4(skinnedpos, 1.0), u_world).xyz; mediump vec3 skinnednormal = mul(vec4(normal, 0.0), skinMatrix).xyz * 1.9921875; mediump vec3 worldnormal = normalizeOr001(mul(vec4(skinnednormal, 0.0), u_world).xyz); vec4 viewPos = vec4(mul(vec4(worldpos, 1.0), u_view).xyz, 1.0); vec4 outPos = mul(u_proj, viewPos); lowp vec4 lightSum0 = u_ambient * color0 + vec4(u_matemissive, 0.0); vec3 toLight; lowp vec3 diffuse; mediump float ldot; toLight = u_lightpos0; ldot = dot(toLight, worldnormal); diffuse = (u_lightdiffuse0 * color0.rgb) * max(ldot, 0.0); lightSum0.rgb += (u_lightambient0 * color0.rgb + diffuse); v_color0 = clamp(lightSum0, 0.0, 1.0); v_color1 = splat3(0.0); v_texcoord = vec3(texcoord.xy * u_uvscaleoffset.xy, 0.0); v_fogdepth = (viewPos.z + u_fogcoef.x) * u_fogcoef.y; vec3 projPos = outPos.xyz / outPos.w; float projZ = (projPos.z - u_depthRange.z) * u_depthRange.w; if (u_cullRangeMin.w <= 0.0 || projZ * outPos.w > -outPos.w) { if (projPos.x < u_cullRangeMin.x || projPos.y < u_cullRangeMin.y || projPos.x > u_cullRangeMax.x || projPos.y > u_cullRangeMax.y) { outPos.xyzw = u_cullRangeMax.wwww; } } if (u_cullRangeMin.w <= 0.0) { if (projPos.z < u_cullRangeMin.z || projPos.z > u_cullRangeMax.z) { outPos.xyzw = u_cullRangeMax.wwww; } } gl_ClipDistance[0] = projZ * outPos.w + outPos.w; if (u_cullRangeMin.w > 0.0) { gl_CullDistance[0] = projPos.z - u_cullRangeMin.z; gl_CullDistance[1] = u_cullRangeMax.z - projPos.z; } gl_Position = outPos; h_normal = worldnormal*0.5+0.5; } 1 1 1 2023-01-15
Error in shader compilation: info: ERROR: 0:70: 'assign' : l-value required "h_normal" (can't modify an attribute) ERROR: 1 compilation errors. No code generated. 01170000:00000b3d HWX C T N LM Fog Tex Light: 0: c:0 t:0 MatUp:7 Cull #version 320 es #extension GL_EXT_clip_cull_distance : enable // Adreno (TM) 512 - GLSL 320 precision highp float; #define gl_VertexIndex gl_VertexID #define splat3(x) vec3(x) #define mul(x, y) ((x) * (y)) in vec3 position; in mediump vec3 normal; in vec2 texcoord; in lowp vec4 color0; uniform mat4 u_proj; uniform mat4 u_world; uniform mat4 u_view; uniform vec4 u_uvscaleoffset; uniform vec3 u_lightpos0; uniform lowp vec3 u_lightambient0; uniform lowp vec3 u_lightdiffuse0; uniform lowp vec4 u_ambient; uniform lowp vec4 u_matspecular; uniform lowp vec3 u_matemissive; uniform lowp vec4 u_matambientalpha; uniform highp vec2 u_fogcoef; uniform highp vec4 u_depthRange; uniform highp vec4 u_cullRangeMin; uniform highp vec4 u_cullRangeMax; out lowp vec4 v_color0; out lowp vec3 v_color1; out mediump vec3 v_texcoord; out mediump float v_fogdepth; in vec3 h_normal; vec3 normalizeOr001(vec3 v) { return length(v) == 0.0 ? vec3(0.0, 0.0, 1.0) : normalize(v); } void main() { vec3 worldpos = mul(vec4(position, 1.0), u_world).xyz; mediump vec3 worldnormal = normalizeOr001(mul(vec4(normal, 0.0), u_world).xyz); vec4 viewPos = vec4(mul(vec4(worldpos, 1.0), u_view).xyz, 1.0); vec4 outPos = mul(u_proj, viewPos); lowp vec4 lightSum0 = u_ambient * color0 + vec4(u_matemissive, 0.0); vec3 toLight; lowp vec3 diffuse; mediump float ldot; toLight = u_lightpos0; ldot = dot(toLight, worldnormal); diffuse = (u_lightdiffuse0 * color0.rgb) * max(ldot, 0.0); lightSum0.rgb += (u_lightambient0 * color0.rgb + diffuse); v_color0 = clamp(lightSum0, 0.0, 1.0); v_color1 = splat3(0.0); v_texcoord = vec3(texcoord.xy * u_uvscaleoffset.xy, 0.0); v_fogdepth = (viewPos.z + u_fogcoef.x) * u_fogcoef.y; vec3 projPos = outPos.xyz / outPos.w; float projZ = (projPos.z - u_depthRange.z) * u_depthRange.w; if (u_cullRangeMin.w <= 0.0 || projZ * outPos.w > -outPos.w) { if (projPos.x < u_cullRangeMin.x || projPos.y < u_cullRangeMin.y || projPos.x > u_cullRangeMax.x || projPos.y > u_cullRangeMax.y) { outPos.xyzw = u_cullRangeMax.wwww; } } if (u_cullRangeMin.w <= 0.0) { if (projPos.z < u_cullRangeMin.z || projPos.z > u_cullRangeMax.z) { outPos.xyzw = u_cullRangeMax.wwww; } } gl_ClipDistance[0] = projZ * outPos.w + outPos.w; if (u_cullRangeMin.w > 0.0) { gl_CullDistance[0] = projPos.z - u_cullRangeMin.z; gl_CullDistance[1] = u_cullRangeMax.z - projPos.z; } gl_Position = outPos; h_normal = worldnormal*0.5+0.5; } 1 1 1 2023-01-15
Error in shader compilation: info: ERROR: 0:51: 'assign' : l-value required "h_normal" (can't modify an attribute) ERROR: 1 compilation errors. No code generated. 00000000:00000b38 HWX C T N Tex Cull #version 320 es #extension GL_EXT_clip_cull_distance : enable // Adreno (TM) 512 - GLSL 320 precision highp float; #define gl_VertexIndex gl_VertexID #define splat3(x) vec3(x) #define mul(x, y) ((x) * (y)) in vec3 position; in mediump vec3 normal; in vec2 texcoord; in lowp vec4 color0; uniform mat4 u_proj; uniform mat4 u_world; uniform mat4 u_view; uniform vec4 u_uvscaleoffset; uniform lowp vec4 u_matambientalpha; uniform highp vec4 u_depthRange; uniform highp vec4 u_cullRangeMin; uniform highp vec4 u_cullRangeMax; out lowp vec4 v_color0; out mediump vec3 v_texcoord; in vec3 h_normal; vec3 normalizeOr001(vec3 v) { return length(v) == 0.0 ? vec3(0.0, 0.0, 1.0) : normalize(v); } void main() { vec3 worldpos = mul(vec4(position, 1.0), u_world).xyz; mediump vec3 worldnormal = normalizeOr001(mul(vec4(normal, 0.0), u_world).xyz); vec4 viewPos = vec4(mul(vec4(worldpos, 1.0), u_view).xyz, 1.0); vec4 outPos = mul(u_proj, viewPos); v_color0 = color0; v_texcoord = vec3(texcoord.xy * u_uvscaleoffset.xy, 0.0); vec3 projPos = outPos.xyz / outPos.w; float projZ = (projPos.z - u_depthRange.z) * u_depthRange.w; if (u_cullRangeMin.w <= 0.0 || projZ * outPos.w > -outPos.w) { if (projPos.x < u_cullRangeMin.x || projPos.y < u_cullRangeMin.y || projPos.x > u_cullRangeMax.x || projPos.y > u_cullRangeMax.y) { outPos.xyzw = u_cullRangeMax.wwww; } } if (u_cullRangeMin.w <= 0.0) { if (projPos.z < u_cullRangeMin.z || projPos.z > u_cullRangeMax.z) { outPos.xyzw = u_cullRangeMax.wwww; } } gl_ClipDistance[0] = projZ * outPos.w + outPos.w; if (u_cullRangeMin.w > 0.0) { gl_CullDistance[0] = projPos.z - u_cullRangeMin.z; gl_CullDistance[1] = u_cullRangeMax.z - projPos.z; } gl_Position = outPos; h_normal = worldnormal*0.5+0.5; } 1 1 1 2023-01-15
Error in shader compilation: info: ERROR: 0:16: 'assign' : l-value required "h_normal" (can't modify an attribute) ERROR: 1 compilation errors. No code generated. 00000000:0000000a THR C #version 320 es // Adreno (TM) 512 - GLSL 320 precision highp float; #define gl_VertexIndex gl_VertexID #define splat3(x) vec3(x) #define mul(x, y) ((x) * (y)) in vec4 position; in lowp vec4 color0; uniform mat4 u_proj_through; out lowp vec4 v_color0; in vec3 h_normal; void main() { v_color0 = color0; vec4 outPos = mul(u_proj_through, vec4(position.xyz, 1.0)); gl_Position = outPos; h_normal = vec3(-1.0); } 1 1 1 2023-01-15
Error in shader compilation: info: ERROR: 0:19: 'assign' : l-value required "h_depth" (can't modify an attribute) ERROR: 1 compilation errors. No code generated. 00000000:0000001a THR C Tex #version 320 es // Adreno (TM) 512 - GLSL 320 precision highp float; #define gl_VertexIndex gl_VertexID #define splat3(x) vec3(x) #define mul(x, y) ((x) * (y)) in vec4 position; in vec2 texcoord; in lowp vec4 color0; uniform mat4 u_proj_through; out lowp vec4 v_color0; out mediump vec3 v_texcoord; in float h_depth; void main() { v_texcoord = vec3(texcoord, 1.0); v_color0 = color0; vec4 outPos = mul(u_proj_through, vec4(position.xyz, 1.0)); gl_Position = outPos; h_depth = outPos.z/outPos.w; } 1 1 1 2023-01-15
Error in shader compilation: info: ERROR: 0:50: 'assign' : l-value required "h_depth" (can't modify an attribute) ERROR: 1 compilation errors. No code generated. 00000000:00000938 HWX C T Tex Cull #version 320 es #extension GL_EXT_clip_cull_distance : enable // Adreno (TM) 512 - GLSL 320 precision highp float; #define gl_VertexIndex gl_VertexID #define splat3(x) vec3(x) #define mul(x, y) ((x) * (y)) in vec3 position; in vec2 texcoord; in lowp vec4 color0; uniform mat4 u_proj; uniform mat4 u_world; uniform mat4 u_view; uniform vec4 u_uvscaleoffset; uniform lowp vec4 u_matambientalpha; uniform highp vec4 u_depthRange; uniform highp vec4 u_cullRangeMin; uniform highp vec4 u_cullRangeMax; out lowp vec4 v_color0; out mediump vec3 v_texcoord; in float h_depth; vec3 normalizeOr001(vec3 v) { return length(v) == 0.0 ? vec3(0.0, 0.0, 1.0) : normalize(v); } void main() { vec3 worldpos = mul(vec4(position, 1.0), u_world).xyz; mediump vec3 worldnormal = vec3(0.0, 0.0, 1.0); vec4 viewPos = vec4(mul(vec4(worldpos, 1.0), u_view).xyz, 1.0); vec4 outPos = mul(u_proj, viewPos); v_color0 = color0; v_texcoord = vec3(texcoord.xy * u_uvscaleoffset.xy, 0.0); vec3 projPos = outPos.xyz / outPos.w; float projZ = (projPos.z - u_depthRange.z) * u_depthRange.w; if (u_cullRangeMin.w <= 0.0 || projZ * outPos.w > -outPos.w) { if (projPos.x < u_cullRangeMin.x || projPos.y < u_cullRangeMin.y || projPos.x > u_cullRangeMax.x || projPos.y > u_cullRangeMax.y) { outPos.xyzw = u_cullRangeMax.wwww; } } if (u_cullRangeMin.w <= 0.0) { if (projPos.z < u_cullRangeMin.z || projPos.z > u_cullRangeMax.z) { outPos.xyzw = u_cullRangeMax.wwww; } } gl_ClipDistance[0] = projZ * outPos.w + outPos.w; if (u_cullRangeMin.w > 0.0) { gl_CullDistance[0] = projPos.z - u_cullRangeMin.z; gl_CullDistance[1] = u_cullRangeMax.z - projPos.z; } gl_Position = outPos; h_depth = outPos.z/outPos.w; } 1 1 1 2023-01-15
Error in shader compilation: info: ERROR: 0:80: 'assign' : l-value required "h_depth" (can't modify an attribute) ERROR: 1 compilation errors. No code generated. 03170000:41000b3d HWX C T N LM Fog Tex Bones:5 Light: 0: c:0 t:0 MatUp:7 WScale 1 Cull #version 320 es #extension GL_EXT_clip_cull_distance : enable // Adreno (TM) 512 - GLSL 320 precision highp float; #define gl_VertexIndex gl_VertexID #define splat3(x) vec3(x) #define mul(x, y) ((x) * (y)) in mediump vec4 w1; in mediump float w2; in vec3 position; in mediump vec3 normal; in vec2 texcoord; in lowp vec4 color0; uniform mat4 u_proj; uniform mat4 u_world; uniform mat4 u_view; uniform mat4 u_bone0; uniform mat4 u_bone1; uniform mat4 u_bone2; uniform mat4 u_bone3; uniform mat4 u_bone4; uniform vec4 u_uvscaleoffset; uniform vec3 u_lightpos0; uniform lowp vec3 u_lightambient0; uniform lowp vec3 u_lightdiffuse0; uniform lowp vec4 u_ambient; uniform lowp vec4 u_matspecular; uniform lowp vec3 u_matemissive; uniform lowp vec4 u_matambientalpha; uniform highp vec2 u_fogcoef; uniform highp vec4 u_depthRange; uniform highp vec4 u_cullRangeMin; uniform highp vec4 u_cullRangeMax; out lowp vec4 v_color0; out lowp vec3 v_color1; out mediump vec3 v_texcoord; out mediump float v_fogdepth; in float h_depth; vec3 normalizeOr001(vec3 v) { return length(v) == 0.0 ? vec3(0.0, 0.0, 1.0) : normalize(v); } void main() { mat4 skinMatrix = mul(w1.x, u_bone0) + mul(w1.y, u_bone1) + mul(w1.z, u_bone2) + mul(w1.w, u_bone3) + mul(w2, u_bone4); vec3 skinnedpos = mul(vec4(position, 1.0), skinMatrix).xyz * 1.9921875; vec3 worldpos = mul(vec4(skinnedpos, 1.0), u_world).xyz; mediump vec3 skinnednormal = mul(vec4(normal, 0.0), skinMatrix).xyz * 1.9921875; mediump vec3 worldnormal = normalizeOr001(mul(vec4(skinnednormal, 0.0), u_world).xyz); vec4 viewPos = vec4(mul(vec4(worldpos, 1.0), u_view).xyz, 1.0); vec4 outPos = mul(u_proj, viewPos); lowp vec4 lightSum0 = u_ambient * color0 + vec4(u_matemissive, 0.0); vec3 toLight; lowp vec3 diffuse; mediump float ldot; toLight = u_lightpos0; ldot = dot(toLight, worldnormal); diffuse = (u_lightdiffuse0 * color0.rgb) * max(ldot, 0.0); lightSum0.rgb += (u_lightambient0 * color0.rgb + diffuse); v_color0 = clamp(lightSum0, 0.0, 1.0); v_color1 = splat3(0.0); v_texcoord = vec3(texcoord.xy * u_uvscaleoffset.xy, 0.0); v_fogdepth = (viewPos.z + u_fogcoef.x) * u_fogcoef.y; vec3 projPos = outPos.xyz / outPos.w; float projZ = (projPos.z - u_depthRange.z) * u_depthRange.w; if (u_cullRangeMin.w <= 0.0 || projZ * outPos.w > -outPos.w) { if (projPos.x < u_cullRangeMin.x || projPos.y < u_cullRangeMin.y || projPos.x > u_cullRangeMax.x || projPos.y > u_cullRangeMax.y) { outPos.xyzw = u_cullRangeMax.wwww; } } if (u_cullRangeMin.w <= 0.0) { if (projPos.z < u_cullRangeMin.z || projPos.z > u_cullRangeMax.z) { outPos.xyzw = u_cullRangeMax.wwww; } } gl_ClipDistance[0] = projZ * outPos.w + outPos.w; if (u_cullRangeMin.w > 0.0) { gl_CullDistance[0] = projPos.z - u_cullRangeMin.z; gl_CullDistance[1] = u_cullRangeMax.z - projPos.z; } gl_Position = outPos; h_depth = outPos.z/outPos.w; } 1 1 1 2023-01-15
Error in shader compilation: info: ERROR: 0:78: 'assign' : l-value required "h_depth" (can't modify an attribute) ERROR: 1 compilation errors. No code generated. 03170000:40c00b3d HWX C T N LM Fog Tex Bones:4 Light: 0: c:0 t:0 MatUp:7 WScale 1 Cull #version 320 es #extension GL_EXT_clip_cull_distance : enable // Adreno (TM) 512 - GLSL 320 precision highp float; #define gl_VertexIndex gl_VertexID #define splat3(x) vec3(x) #define mul(x, y) ((x) * (y)) in mediump vec4 w1; in vec3 position; in mediump vec3 normal; in vec2 texcoord; in lowp vec4 color0; uniform mat4 u_proj; uniform mat4 u_world; uniform mat4 u_view; uniform mat4 u_bone0; uniform mat4 u_bone1; uniform mat4 u_bone2; uniform mat4 u_bone3; uniform vec4 u_uvscaleoffset; uniform vec3 u_lightpos0; uniform lowp vec3 u_lightambient0; uniform lowp vec3 u_lightdiffuse0; uniform lowp vec4 u_ambient; uniform lowp vec4 u_matspecular; uniform lowp vec3 u_matemissive; uniform lowp vec4 u_matambientalpha; uniform highp vec2 u_fogcoef; uniform highp vec4 u_depthRange; uniform highp vec4 u_cullRangeMin; uniform highp vec4 u_cullRangeMax; out lowp vec4 v_color0; out lowp vec3 v_color1; out mediump vec3 v_texcoord; out mediump float v_fogdepth; in float h_depth; vec3 normalizeOr001(vec3 v) { return length(v) == 0.0 ? vec3(0.0, 0.0, 1.0) : normalize(v); } void main() { mat4 skinMatrix = mul(w1.x, u_bone0) + mul(w1.y, u_bone1) + mul(w1.z, u_bone2) + mul(w1.w, u_bone3); vec3 skinnedpos = mul(vec4(position, 1.0), skinMatrix).xyz * 1.9921875; vec3 worldpos = mul(vec4(skinnedpos, 1.0), u_world).xyz; mediump vec3 skinnednormal = mul(vec4(normal, 0.0), skinMatrix).xyz * 1.9921875; mediump vec3 worldnormal = normalizeOr001(mul(vec4(skinnednormal, 0.0), u_world).xyz); vec4 viewPos = vec4(mul(vec4(worldpos, 1.0), u_view).xyz, 1.0); vec4 outPos = mul(u_proj, viewPos); lowp vec4 lightSum0 = u_ambient * color0 + vec4(u_matemissive, 0.0); vec3 toLight; lowp vec3 diffuse; mediump float ldot; toLight = u_lightpos0; ldot = dot(toLight, worldnormal); diffuse = (u_lightdiffuse0 * color0.rgb) * max(ldot, 0.0); lightSum0.rgb += (u_lightambient0 * color0.rgb + diffuse); v_color0 = clamp(lightSum0, 0.0, 1.0); v_color1 = splat3(0.0); v_texcoord = vec3(texcoord.xy * u_uvscaleoffset.xy, 0.0); v_fogdepth = (viewPos.z + u_fogcoef.x) * u_fogcoef.y; vec3 projPos = outPos.xyz / outPos.w; float projZ = (projPos.z - u_depthRange.z) * u_depthRange.w; if (u_cullRangeMin.w <= 0.0 || projZ * outPos.w > -outPos.w) { if (projPos.x < u_cullRangeMin.x || projPos.y < u_cullRangeMin.y || projPos.x > u_cullRangeMax.x || projPos.y > u_cullRangeMax.y) { outPos.xyzw = u_cullRangeMax.wwww; } } if (u_cullRangeMin.w <= 0.0) { if (projPos.z < u_cullRangeMin.z || projPos.z > u_cullRangeMax.z) { outPos.xyzw = u_cullRangeMax.wwww; } } gl_ClipDistance[0] = projZ * outPos.w + outPos.w; if (u_cullRangeMin.w > 0.0) { gl_CullDistance[0] = projPos.z - u_cullRangeMin.z; gl_CullDistance[1] = u_cullRangeMax.z - projPos.z; } gl_Position = outPos; h_depth = outPos.z/outPos.w; } 1 1 1 2023-01-15
Error in shader compilation: info: ERROR: 0:82: 'assign' : l-value required "h_depth" (can't modify an attribute) ERROR: 1 compilation errors. No code generated. 03170000:41800b3d HWX C T N LM Fog Tex Bones:7 Light: 0: c:0 t:0 MatUp:7 WScale 1 Cull #version 320 es #extension GL_EXT_clip_cull_distance : enable // Adreno (TM) 512 - GLSL 320 precision highp float; #define gl_VertexIndex gl_VertexID #define splat3(x) vec3(x) #define mul(x, y) ((x) * (y)) in mediump vec4 w1; in mediump vec3 w2; in vec3 position; in mediump vec3 normal; in vec2 texcoord; in lowp vec4 color0; uniform mat4 u_proj; uniform mat4 u_world; uniform mat4 u_view; uniform mat4 u_bone0; uniform mat4 u_bone1; uniform mat4 u_bone2; uniform mat4 u_bone3; uniform mat4 u_bone4; uniform mat4 u_bone5; uniform mat4 u_bone6; uniform vec4 u_uvscaleoffset; uniform vec3 u_lightpos0; uniform lowp vec3 u_lightambient0; uniform lowp vec3 u_lightdiffuse0; uniform lowp vec4 u_ambient; uniform lowp vec4 u_matspecular; uniform lowp vec3 u_matemissive; uniform lowp vec4 u_matambientalpha; uniform highp vec2 u_fogcoef; uniform highp vec4 u_depthRange; uniform highp vec4 u_cullRangeMin; uniform highp vec4 u_cullRangeMax; out lowp vec4 v_color0; out lowp vec3 v_color1; out mediump vec3 v_texcoord; out mediump float v_fogdepth; in float h_depth; vec3 normalizeOr001(vec3 v) { return length(v) == 0.0 ? vec3(0.0, 0.0, 1.0) : normalize(v); } void main() { mat4 skinMatrix = mul(w1.x, u_bone0) + mul(w1.y, u_bone1) + mul(w1.z, u_bone2) + mul(w1.w, u_bone3) + mul(w2.x, u_bone4) + mul(w2.y, u_bone5) + mul(w2.z, u_bone6); vec3 skinnedpos = mul(vec4(position, 1.0), skinMatrix).xyz * 1.9921875; vec3 worldpos = mul(vec4(skinnedpos, 1.0), u_world).xyz; mediump vec3 skinnednormal = mul(vec4(normal, 0.0), skinMatrix).xyz * 1.9921875; mediump vec3 worldnormal = normalizeOr001(mul(vec4(skinnednormal, 0.0), u_world).xyz); vec4 viewPos = vec4(mul(vec4(worldpos, 1.0), u_view).xyz, 1.0); vec4 outPos = mul(u_proj, viewPos); lowp vec4 lightSum0 = u_ambient * color0 + vec4(u_matemissive, 0.0); vec3 toLight; lowp vec3 diffuse; mediump float ldot; toLight = u_lightpos0; ldot = dot(toLight, worldnormal); diffuse = (u_lightdiffuse0 * color0.rgb) * max(ldot, 0.0); lightSum0.rgb += (u_lightambient0 * color0.rgb + diffuse); v_color0 = clamp(lightSum0, 0.0, 1.0); v_color1 = splat3(0.0); v_texcoord = vec3(texcoord.xy * u_uvscaleoffset.xy, 0.0); v_fogdepth = (viewPos.z + u_fogcoef.x) * u_fogcoef.y; vec3 projPos = outPos.xyz / outPos.w; float projZ = (projPos.z - u_depthRange.z) * u_depthRange.w; if (u_cullRangeMin.w <= 0.0 || projZ * outPos.w > -outPos.w) { if (projPos.x < u_cullRangeMin.x || projPos.y < u_cullRangeMin.y || projPos.x > u_cullRangeMax.x || projPos.y > u_cullRangeMax.y) { outPos.xyzw = u_cullRangeMax.wwww; } } if (u_cullRangeMin.w <= 0.0) { if (projPos.z < u_cullRangeMin.z || projPos.z > u_cullRangeMax.z) { outPos.xyzw = u_cullRangeMax.wwww; } } gl_ClipDistance[0] = projZ * outPos.w + outPos.w; if (u_cullRangeMin.w > 0.0) { gl_CullDistance[0] = projPos.z - u_cullRangeMin.z; gl_CullDistance[1] = u_cullRangeMax.z - projPos.z; } gl_Position = outPos; h_depth = outPos.z/outPos.w; } 1 1 1 2023-01-15
Error in shader compilation: info: ERROR: 0:82: 'assign' : l-value required "h_depth" (can't modify an attribute) ERROR: 1 compilation errors. No code generated. 03170000:41c00b3d HWX C T N LM Fog Tex Bones:8 Light: 0: c:0 t:0 MatUp:7 WScale 1 Cull #version 320 es #extension GL_EXT_clip_cull_distance : enable // Adreno (TM) 512 - GLSL 320 precision highp float; #define gl_VertexIndex gl_VertexID #define splat3(x) vec3(x) #define mul(x, y) ((x) * (y)) in mediump vec4 w1, w2; in vec3 position; in mediump vec3 normal; in vec2 texcoord; in lowp vec4 color0; uniform mat4 u_proj; uniform mat4 u_world; uniform mat4 u_view; uniform mat4 u_bone0; uniform mat4 u_bone1; uniform mat4 u_bone2; uniform mat4 u_bone3; uniform mat4 u_bone4; uniform mat4 u_bone5; uniform mat4 u_bone6; uniform mat4 u_bone7; uniform vec4 u_uvscaleoffset; uniform vec3 u_lightpos0; uniform lowp vec3 u_lightambient0; uniform lowp vec3 u_lightdiffuse0; uniform lowp vec4 u_ambient; uniform lowp vec4 u_matspecular; uniform lowp vec3 u_matemissive; uniform lowp vec4 u_matambientalpha; uniform highp vec2 u_fogcoef; uniform highp vec4 u_depthRange; uniform highp vec4 u_cullRangeMin; uniform highp vec4 u_cullRangeMax; out lowp vec4 v_color0; out lowp vec3 v_color1; out mediump vec3 v_texcoord; out mediump float v_fogdepth; in float h_depth; vec3 normalizeOr001(vec3 v) { return length(v) == 0.0 ? vec3(0.0, 0.0, 1.0) : normalize(v); } void main() { mat4 skinMatrix = mul(w1.x, u_bone0) + mul(w1.y, u_bone1) + mul(w1.z, u_bone2) + mul(w1.w, u_bone3) + mul(w2.x, u_bone4) + mul(w2.y, u_bone5) + mul(w2.z, u_bone6) + mul(w2.w, u_bone7); vec3 skinnedpos = mul(vec4(position, 1.0), skinMatrix).xyz * 1.9921875; vec3 worldpos = mul(vec4(skinnedpos, 1.0), u_world).xyz; mediump vec3 skinnednormal = mul(vec4(normal, 0.0), skinMatrix).xyz * 1.9921875; mediump vec3 worldnormal = normalizeOr001(mul(vec4(skinnednormal, 0.0), u_world).xyz); vec4 viewPos = vec4(mul(vec4(worldpos, 1.0), u_view).xyz, 1.0); vec4 outPos = mul(u_proj, viewPos); lowp vec4 lightSum0 = u_ambient * color0 + vec4(u_matemissive, 0.0); vec3 toLight; lowp vec3 diffuse; mediump float ldot; toLight = u_lightpos0; ldot = dot(toLight, worldnormal); diffuse = (u_lightdiffuse0 * color0.rgb) * max(ldot, 0.0); lightSum0.rgb += (u_lightambient0 * color0.rgb + diffuse); v_color0 = clamp(lightSum0, 0.0, 1.0); v_color1 = splat3(0.0); v_texcoord = vec3(texcoord.xy * u_uvscaleoffset.xy, 0.0); v_fogdepth = (viewPos.z + u_fogcoef.x) * u_fogcoef.y; vec3 projPos = outPos.xyz / outPos.w; float projZ = (projPos.z - u_depthRange.z) * u_depthRange.w; if (u_cullRangeMin.w <= 0.0 || projZ * outPos.w > -outPos.w) { if (projPos.x < u_cullRangeMin.x || projPos.y < u_cullRangeMin.y || projPos.x > u_cullRangeMax.x || projPos.y > u_cullRangeMax.y) { outPos.xyzw = u_cullRangeMax.wwww; } } if (u_cullRangeMin.w <= 0.0) { if (projPos.z < u_cullRangeMin.z || projPos.z > u_cullRangeMax.z) { outPos.xyzw = u_cullRangeMax.wwww; } } gl_ClipDistance[0] = projZ * outPos.w + outPos.w; if (u_cullRangeMin.w > 0.0) { gl_CullDistance[0] = projPos.z - u_cullRangeMin.z; gl_CullDistance[1] = u_cullRangeMax.z - projPos.z; } gl_Position = outPos; h_depth = outPos.z/outPos.w; } 1 1 1 2023-01-15
Error in shader compilation: info: ERROR: 0:70: 'assign' : l-value required "h_depth" (can't modify an attribute) ERROR: 1 compilation errors. No code generated. 01170000:00000b3d HWX C T N LM Fog Tex Light: 0: c:0 t:0 MatUp:7 Cull #version 320 es #extension GL_EXT_clip_cull_distance : enable // Adreno (TM) 512 - GLSL 320 precision highp float; #define gl_VertexIndex gl_VertexID #define splat3(x) vec3(x) #define mul(x, y) ((x) * (y)) in vec3 position; in mediump vec3 normal; in vec2 texcoord; in lowp vec4 color0; uniform mat4 u_proj; uniform mat4 u_world; uniform mat4 u_view; uniform vec4 u_uvscaleoffset; uniform vec3 u_lightpos0; uniform lowp vec3 u_lightambient0; uniform lowp vec3 u_lightdiffuse0; uniform lowp vec4 u_ambient; uniform lowp vec4 u_matspecular; uniform lowp vec3 u_matemissive; uniform lowp vec4 u_matambientalpha; uniform highp vec2 u_fogcoef; uniform highp vec4 u_depthRange; uniform highp vec4 u_cullRangeMin; uniform highp vec4 u_cullRangeMax; out lowp vec4 v_color0; out lowp vec3 v_color1; out mediump vec3 v_texcoord; out mediump float v_fogdepth; in float h_depth; vec3 normalizeOr001(vec3 v) { return length(v) == 0.0 ? vec3(0.0, 0.0, 1.0) : normalize(v); } void main() { vec3 worldpos = mul(vec4(position, 1.0), u_world).xyz; mediump vec3 worldnormal = normalizeOr001(mul(vec4(normal, 0.0), u_world).xyz); vec4 viewPos = vec4(mul(vec4(worldpos, 1.0), u_view).xyz, 1.0); vec4 outPos = mul(u_proj, viewPos); lowp vec4 lightSum0 = u_ambient * color0 + vec4(u_matemissive, 0.0); vec3 toLight; lowp vec3 diffuse; mediump float ldot; toLight = u_lightpos0; ldot = dot(toLight, worldnormal); diffuse = (u_lightdiffuse0 * color0.rgb) * max(ldot, 0.0); lightSum0.rgb += (u_lightambient0 * color0.rgb + diffuse); v_color0 = clamp(lightSum0, 0.0, 1.0); v_color1 = splat3(0.0); v_texcoord = vec3(texcoord.xy * u_uvscaleoffset.xy, 0.0); v_fogdepth = (viewPos.z + u_fogcoef.x) * u_fogcoef.y; vec3 projPos = outPos.xyz / outPos.w; float projZ = (projPos.z - u_depthRange.z) * u_depthRange.w; if (u_cullRangeMin.w <= 0.0 || projZ * outPos.w > -outPos.w) { if (projPos.x < u_cullRangeMin.x || projPos.y < u_cullRangeMin.y || projPos.x > u_cullRangeMax.x || projPos.y > u_cullRangeMax.y) { outPos.xyzw = u_cullRangeMax.wwww; } } if (u_cullRangeMin.w <= 0.0) { if (projPos.z < u_cullRangeMin.z || projPos.z > u_cullRangeMax.z) { outPos.xyzw = u_cullRangeMax.wwww; } } gl_ClipDistance[0] = projZ * outPos.w + outPos.w; if (u_cullRangeMin.w > 0.0) { gl_CullDistance[0] = projPos.z - u_cullRangeMin.z; gl_CullDistance[1] = u_cullRangeMax.z - projPos.z; } gl_Position = outPos; h_depth = outPos.z/outPos.w; } 1 1 1 2023-01-15
Error in shader compilation: info: ERROR: 0:51: 'assign' : l-value required "h_depth" (can't modify an attribute) ERROR: 1 compilation errors. No code generated. 00000000:00000b38 HWX C T N Tex Cull #version 320 es #extension GL_EXT_clip_cull_distance : enable // Adreno (TM) 512 - GLSL 320 precision highp float; #define gl_VertexIndex gl_VertexID #define splat3(x) vec3(x) #define mul(x, y) ((x) * (y)) in vec3 position; in mediump vec3 normal; in vec2 texcoord; in lowp vec4 color0; uniform mat4 u_proj; uniform mat4 u_world; uniform mat4 u_view; uniform vec4 u_uvscaleoffset; uniform lowp vec4 u_matambientalpha; uniform highp vec4 u_depthRange; uniform highp vec4 u_cullRangeMin; uniform highp vec4 u_cullRangeMax; out lowp vec4 v_color0; out mediump vec3 v_texcoord; in float h_depth; vec3 normalizeOr001(vec3 v) { return length(v) == 0.0 ? vec3(0.0, 0.0, 1.0) : normalize(v); } void main() { vec3 worldpos = mul(vec4(position, 1.0), u_world).xyz; mediump vec3 worldnormal = normalizeOr001(mul(vec4(normal, 0.0), u_world).xyz); vec4 viewPos = vec4(mul(vec4(worldpos, 1.0), u_view).xyz, 1.0); vec4 outPos = mul(u_proj, viewPos); v_color0 = color0; v_texcoord = vec3(texcoord.xy * u_uvscaleoffset.xy, 0.0); vec3 projPos = outPos.xyz / outPos.w; float projZ = (projPos.z - u_depthRange.z) * u_depthRange.w; if (u_cullRangeMin.w <= 0.0 || projZ * outPos.w > -outPos.w) { if (projPos.x < u_cullRangeMin.x || projPos.y < u_cullRangeMin.y || projPos.x > u_cullRangeMax.x || projPos.y > u_cullRangeMax.y) { outPos.xyzw = u_cullRangeMax.wwww; } } if (u_cullRangeMin.w <= 0.0) { if (projPos.z < u_cullRangeMin.z || projPos.z > u_cullRangeMax.z) { outPos.xyzw = u_cullRangeMax.wwww; } } gl_ClipDistance[0] = projZ * outPos.w + outPos.w; if (u_cullRangeMin.w > 0.0) { gl_CullDistance[0] = projPos.z - u_cullRangeMin.z; gl_CullDistance[1] = u_cullRangeMax.z - projPos.z; } gl_Position = outPos; h_depth = outPos.z/outPos.w; } 1 1 1 2023-01-15
Error in shader compilation: info: ERROR: 0:16: 'assign' : l-value required "h_depth" (can't modify an attribute) ERROR: 1 compilation errors. No code generated. 00000000:0000000a THR C #version 320 es // Adreno (TM) 512 - GLSL 320 precision highp float; #define gl_VertexIndex gl_VertexID #define splat3(x) vec3(x) #define mul(x, y) ((x) * (y)) in vec4 position; in lowp vec4 color0; uniform mat4 u_proj_through; out lowp vec4 v_color0; in float h_depth; void main() { v_color0 = color0; vec4 outPos = mul(u_proj_through, vec4(position.xyz, 1.0)); gl_Position = outPos; h_depth = outPos.z/outPos.w; } 1 1 1 2023-01-15
Error in shader compilation: info: ERROR: 0:21: 'assign' : l-value required "h_depth" (can't modify an attribute) ERROR: 0:22: 'assign' : l-value required "h_normal" (can't modify an attribute) ERROR: 2 compilation errors. No code generated. 00000000:0000001a THR C Tex #version 320 es // Adreno (TM) 512 - GLSL 320 precision highp float; #define gl_VertexIndex gl_VertexID #define splat3(x) vec3(x) #define mul(x, y) ((x) * (y)) in vec4 position; in vec2 texcoord; in lowp vec4 color0; uniform mat4 u_proj_through; out lowp vec4 v_color0; out mediump vec3 v_texcoord; in float h_depth; in vec3 h_normal; void main() { v_texcoord = vec3(texcoord, 1.0); v_color0 = color0; vec4 outPos = mul(u_proj_through, vec4(position.xyz, 1.0)); v_color0.rgb = vec3(0.0); gl_Position = outPos; h_depth = outPos.z/outPos.w; h_normal = vec3(-1.0); } 1 1 1 2023-01-15
Error in shader compilation: info: ERROR: 0:52: 'assign' : l-value required "h_depth" (can't modify an attribute) ERROR: 0:53: 'assign' : l-value required "h_normal" (can't modify an attribute) ERROR: 2 compilation errors. No code generated. 00000000:00000938 HWX C T Tex Cull #version 320 es #extension GL_EXT_clip_cull_distance : enable // Adreno (TM) 512 - GLSL 320 precision highp float; #define gl_VertexIndex gl_VertexID #define splat3(x) vec3(x) #define mul(x, y) ((x) * (y)) in vec3 position; in vec2 texcoord; in lowp vec4 color0; uniform mat4 u_proj; uniform mat4 u_world; uniform mat4 u_view; uniform vec4 u_uvscaleoffset; uniform lowp vec4 u_matambientalpha; uniform highp vec4 u_depthRange; uniform highp vec4 u_cullRangeMin; uniform highp vec4 u_cullRangeMax; out lowp vec4 v_color0; out mediump vec3 v_texcoord; in float h_depth; in vec3 h_normal; vec3 normalizeOr001(vec3 v) { return length(v) == 0.0 ? vec3(0.0, 0.0, 1.0) : normalize(v); } void main() { vec3 worldpos = mul(vec4(position, 1.0), u_world).xyz; mediump vec3 worldnormal = vec3(0.0, 0.0, 1.0); vec4 viewPos = vec4(mul(vec4(worldpos, 1.0), u_view).xyz, 1.0); vec4 outPos = mul(u_proj, viewPos); v_color0 = color0; v_texcoord = vec3(texcoord.xy * u_uvscaleoffset.xy, 0.0); v_color0.rgb = vec3(0.0); vec3 projPos = outPos.xyz / outPos.w; float projZ = (projPos.z - u_depthRange.z) * u_depthRange.w; if (u_cullRangeMin.w <= 0.0 || projZ * outPos.w > -outPos.w) { if (projPos.x < u_cullRangeMin.x || projPos.y < u_cullRangeMin.y || projPos.x > u_cullRangeMax.x || projPos.y > u_cullRangeMax.y) { outPos.xyzw = u_cullRangeMax.wwww; } } if (u_cullRangeMin.w <= 0.0) { if (projPos.z < u_cullRangeMin.z || projPos.z > u_cullRangeMax.z) { outPos.xyzw = u_cullRangeMax.wwww; } } gl_ClipDistance[0] = projZ * outPos.w + outPos.w; if (u_cullRangeMin.w > 0.0) { gl_CullDistance[0] = projPos.z - u_cullRangeMin.z; gl_CullDistance[1] = u_cullRangeMax.z - projPos.z; } gl_Position = outPos; h_depth = outPos.z/outPos.w; h_normal = vec3(-1.0); } 1 1 1 2023-01-15
Error in shader compilation: info: ERROR: 0:82: 'assign' : l-value required "h_depth" (can't modify an attribute) ERROR: 0:83: 'assign' : l-value required "h_normal" (can't modify an attribute) ERROR: 2 compilation errors. No code generated. 03170000:41000b3d HWX C T N LM Fog Tex Bones:5 Light: 0: c:0 t:0 MatUp:7 WScale 1 Cull #version 320 es #extension GL_EXT_clip_cull_distance : enable // Adreno (TM) 512 - GLSL 320 precision highp float; #define gl_VertexIndex gl_VertexID #define splat3(x) vec3(x) #define mul(x, y) ((x) * (y)) in mediump vec4 w1; in mediump float w2; in vec3 position; in mediump vec3 normal; in vec2 texcoord; in lowp vec4 color0; uniform mat4 u_proj; uniform mat4 u_world; uniform mat4 u_view; uniform mat4 u_bone0; uniform mat4 u_bone1; uniform mat4 u_bone2; uniform mat4 u_bone3; uniform mat4 u_bone4; uniform vec4 u_uvscaleoffset; uniform vec3 u_lightpos0; uniform lowp vec3 u_lightambient0; uniform lowp vec3 u_lightdiffuse0; uniform lowp vec4 u_ambient; uniform lowp vec4 u_matspecular; uniform lowp vec3 u_matemissive; uniform lowp vec4 u_matambientalpha; uniform highp vec2 u_fogcoef; uniform highp vec4 u_depthRange; uniform highp vec4 u_cullRangeMin; uniform highp vec4 u_cullRangeMax; out lowp vec4 v_color0; out lowp vec3 v_color1; out mediump vec3 v_texcoord; out mediump float v_fogdepth; in float h_depth; in vec3 h_normal; vec3 normalizeOr001(vec3 v) { return length(v) == 0.0 ? vec3(0.0, 0.0, 1.0) : normalize(v); } void main() { mat4 skinMatrix = mul(w1.x, u_bone0) + mul(w1.y, u_bone1) + mul(w1.z, u_bone2) + mul(w1.w, u_bone3) + mul(w2, u_bone4); vec3 skinnedpos = mul(vec4(position, 1.0), skinMatrix).xyz * 1.9921875; vec3 worldpos = mul(vec4(skinnedpos, 1.0), u_world).xyz; mediump vec3 skinnednormal = mul(vec4(normal, 0.0), skinMatrix).xyz * 1.9921875; mediump vec3 worldnormal = normalizeOr001(mul(vec4(skinnednormal, 0.0), u_world).xyz); vec4 viewPos = vec4(mul(vec4(worldpos, 1.0), u_view).xyz, 1.0); vec4 outPos = mul(u_proj, viewPos); lowp vec4 lightSum0 = u_ambient * color0 + vec4(u_matemissive, 0.0); vec3 toLight; lowp vec3 diffuse; mediump float ldot; toLight = u_lightpos0; ldot = dot(toLight, worldnormal); diffuse = (u_lightdiffuse0 * color0.rgb) * max(ldot, 0.0); lightSum0.rgb += (u_lightambient0 * color0.rgb + diffuse); v_color0 = clamp(lightSum0, 0.0, 1.0); v_color1 = splat3(0.0); v_texcoord = vec3(texcoord.xy * u_uvscaleoffset.xy, 0.0); v_fogdepth = (viewPos.z + u_fogcoef.x) * u_fogcoef.y; v_color0.rgb = vec3(0.0); vec3 projPos = outPos.xyz / outPos.w; float projZ = (projPos.z - u_depthRange.z) * u_depthRange.w; if (u_cullRangeMin.w <= 0.0 || projZ * outPos.w > -outPos.w) { if (projPos.x < u_cullRangeMin.x || projPos.y < u_cullRangeMin.y || projPos.x > u_cullRangeMax.x || projPos.y > u_cullRangeMax.y) { outPos.xyzw = u_cullRangeMax.wwww; } } if (u_cullRangeMin.w <= 0.0) { if (projPos.z < u_cullRangeMin.z || projPos.z > u_cullRangeMax.z) { outPos.xyzw = u_cullRangeMax.wwww; } } gl_ClipDistance[0] = projZ * outPos.w + outPos.w; if (u_cullRangeMin.w > 0.0) { gl_CullDistance[0] = projPos.z - u_cullRangeMin.z; gl_CullDistance[1] = u_cullRangeMax.z - projPos.z; } gl_Position = outPos; h_depth = outPos.z/outPos.w; h_normal = worldnormal*0.5+0.5; } 1 1 1 2023-01-15
Error in shader compilation: info: ERROR: 0:80: 'assign' : l-value required "h_depth" (can't modify an attribute) ERROR: 0:81: 'assign' : l-value required "h_normal" (can't modify an attribute) ERROR: 2 compilation errors. No code generated. 03170000:40c00b3d HWX C T N LM Fog Tex Bones:4 Light: 0: c:0 t:0 MatUp:7 WScale 1 Cull #version 320 es #extension GL_EXT_clip_cull_distance : enable // Adreno (TM) 512 - GLSL 320 precision highp float; #define gl_VertexIndex gl_VertexID #define splat3(x) vec3(x) #define mul(x, y) ((x) * (y)) in mediump vec4 w1; in vec3 position; in mediump vec3 normal; in vec2 texcoord; in lowp vec4 color0; uniform mat4 u_proj; uniform mat4 u_world; uniform mat4 u_view; uniform mat4 u_bone0; uniform mat4 u_bone1; uniform mat4 u_bone2; uniform mat4 u_bone3; uniform vec4 u_uvscaleoffset; uniform vec3 u_lightpos0; uniform lowp vec3 u_lightambient0; uniform lowp vec3 u_lightdiffuse0; uniform lowp vec4 u_ambient; uniform lowp vec4 u_matspecular; uniform lowp vec3 u_matemissive; uniform lowp vec4 u_matambientalpha; uniform highp vec2 u_fogcoef; uniform highp vec4 u_depthRange; uniform highp vec4 u_cullRangeMin; uniform highp vec4 u_cullRangeMax; out lowp vec4 v_color0; out lowp vec3 v_color1; out mediump vec3 v_texcoord; out mediump float v_fogdepth; in float h_depth; in vec3 h_normal; vec3 normalizeOr001(vec3 v) { return length(v) == 0.0 ? vec3(0.0, 0.0, 1.0) : normalize(v); } void main() { mat4 skinMatrix = mul(w1.x, u_bone0) + mul(w1.y, u_bone1) + mul(w1.z, u_bone2) + mul(w1.w, u_bone3); vec3 skinnedpos = mul(vec4(position, 1.0), skinMatrix).xyz * 1.9921875; vec3 worldpos = mul(vec4(skinnedpos, 1.0), u_world).xyz; mediump vec3 skinnednormal = mul(vec4(normal, 0.0), skinMatrix).xyz * 1.9921875; mediump vec3 worldnormal = normalizeOr001(mul(vec4(skinnednormal, 0.0), u_world).xyz); vec4 viewPos = vec4(mul(vec4(worldpos, 1.0), u_view).xyz, 1.0); vec4 outPos = mul(u_proj, viewPos); lowp vec4 lightSum0 = u_ambient * color0 + vec4(u_matemissive, 0.0); vec3 toLight; lowp vec3 diffuse; mediump float ldot; toLight = u_lightpos0; ldot = dot(toLight, worldnormal); diffuse = (u_lightdiffuse0 * color0.rgb) * max(ldot, 0.0); lightSum0.rgb += (u_lightambient0 * color0.rgb + diffuse); v_color0 = clamp(lightSum0, 0.0, 1.0); v_color1 = splat3(0.0); v_texcoord = vec3(texcoord.xy * u_uvscaleoffset.xy, 0.0); v_fogdepth = (viewPos.z + u_fogcoef.x) * u_fogcoef.y; v_color0.rgb = vec3(0.0); vec3 projPos = outPos.xyz / outPos.w; float projZ = (projPos.z - u_depthRange.z) * u_depthRange.w; if (u_cullRangeMin.w <= 0.0 || projZ * outPos.w > -outPos.w) { if (projPos.x < u_cullRangeMin.x || projPos.y < u_cullRangeMin.y || projPos.x > u_cullRangeMax.x || projPos.y > u_cullRangeMax.y) { outPos.xyzw = u_cullRangeMax.wwww; } } if (u_cullRangeMin.w <= 0.0) { if (projPos.z < u_cullRangeMin.z || projPos.z > u_cullRangeMax.z) { outPos.xyzw = u_cullRangeMax.wwww; } } gl_ClipDistance[0] = projZ * outPos.w + outPos.w; if (u_cullRangeMin.w > 0.0) { gl_CullDistance[0] = projPos.z - u_cullRangeMin.z; gl_CullDistance[1] = u_cullRangeMax.z - projPos.z; } gl_Position = outPos; h_depth = outPos.z/outPos.w; h_normal = worldnormal*0.5+0.5; } 1 1 1 2023-01-15
Error in shader compilation: info: ERROR: 0:84: 'assign' : l-value required "h_depth" (can't modify an attribute) ERROR: 0:85: 'assign' : l-value required "h_normal" (can't modify an attribute) ERROR: 2 compilation errors. No code generated. 03170000:41800b3d HWX C T N LM Fog Tex Bones:7 Light: 0: c:0 t:0 MatUp:7 WScale 1 Cull #version 320 es #extension GL_EXT_clip_cull_distance : enable // Adreno (TM) 512 - GLSL 320 precision highp float; #define gl_VertexIndex gl_VertexID #define splat3(x) vec3(x) #define mul(x, y) ((x) * (y)) in mediump vec4 w1; in mediump vec3 w2; in vec3 position; in mediump vec3 normal; in vec2 texcoord; in lowp vec4 color0; uniform mat4 u_proj; uniform mat4 u_world; uniform mat4 u_view; uniform mat4 u_bone0; uniform mat4 u_bone1; uniform mat4 u_bone2; uniform mat4 u_bone3; uniform mat4 u_bone4; uniform mat4 u_bone5; uniform mat4 u_bone6; uniform vec4 u_uvscaleoffset; uniform vec3 u_lightpos0; uniform lowp vec3 u_lightambient0; uniform lowp vec3 u_lightdiffuse0; uniform lowp vec4 u_ambient; uniform lowp vec4 u_matspecular; uniform lowp vec3 u_matemissive; uniform lowp vec4 u_matambientalpha; uniform highp vec2 u_fogcoef; uniform highp vec4 u_depthRange; uniform highp vec4 u_cullRangeMin; uniform highp vec4 u_cullRangeMax; out lowp vec4 v_color0; out lowp vec3 v_color1; out mediump vec3 v_texcoord; out mediump float v_fogdepth; in float h_depth; in vec3 h_normal; vec3 normalizeOr001(vec3 v) { return length(v) == 0.0 ? vec3(0.0, 0.0, 1.0) : normalize(v); } void main() { mat4 skinMatrix = mul(w1.x, u_bone0) + mul(w1.y, u_bone1) + mul(w1.z, u_bone2) + mul(w1.w, u_bone3) + mul(w2.x, u_bone4) + mul(w2.y, u_bone5) + mul(w2.z, u_bone6); vec3 skinnedpos = mul(vec4(position, 1.0), skinMatrix).xyz * 1.9921875; vec3 worldpos = mul(vec4(skinnedpos, 1.0), u_world).xyz; mediump vec3 skinnednormal = mul(vec4(normal, 0.0), skinMatrix).xyz * 1.9921875; mediump vec3 worldnormal = normalizeOr001(mul(vec4(skinnednormal, 0.0), u_world).xyz); vec4 viewPos = vec4(mul(vec4(worldpos, 1.0), u_view).xyz, 1.0); vec4 outPos = mul(u_proj, viewPos); lowp vec4 lightSum0 = u_ambient * color0 + vec4(u_matemissive, 0.0); vec3 toLight; lowp vec3 diffuse; mediump float ldot; toLight = u_lightpos0; ldot = dot(toLight, worldnormal); diffuse = (u_lightdiffuse0 * color0.rgb) * max(ldot, 0.0); lightSum0.rgb += (u_lightambient0 * color0.rgb + diffuse); v_color0 = clamp(lightSum0, 0.0, 1.0); v_color1 = splat3(0.0); v_texcoord = vec3(texcoord.xy * u_uvscaleoffset.xy, 0.0); v_fogdepth = (viewPos.z + u_fogcoef.x) * u_fogcoef.y; v_color0.rgb = vec3(0.0); vec3 projPos = outPos.xyz / outPos.w; float projZ = (projPos.z - u_depthRange.z) * u_depthRange.w; if (u_cullRangeMin.w <= 0.0 || projZ * outPos.w > -outPos.w) { if (projPos.x < u_cullRangeMin.x || projPos.y < u_cullRangeMin.y || projPos.x > u_cullRangeMax.x || projPos.y > u_cullRangeMax.y) { outPos.xyzw = u_cullRangeMax.wwww; } } if (u_cullRangeMin.w <= 0.0) { if (projPos.z < u_cullRangeMin.z || projPos.z > u_cullRangeMax.z) { outPos.xyzw = u_cullRangeMax.wwww; } } gl_ClipDistance[0] = projZ * outPos.w + outPos.w; if (u_cullRangeMin.w > 0.0) { gl_CullDistance[0] = projPos.z - u_cullRangeMin.z; gl_CullDistance[1] = u_cullRangeMax.z - projPos.z; } gl_Position = outPos; h_depth = outPos.z/outPos.w; h_normal = worldnormal*0.5+0.5; } 1 1 1 2023-01-15
Error in shader compilation: info: ERROR: 0:84: 'assign' : l-value required "h_depth" (can't modify an attribute) ERROR: 0:85: 'assign' : l-value required "h_normal" (can't modify an attribute) ERROR: 2 compilation errors. No code generated. 03170000:41c00b3d HWX C T N LM Fog Tex Bones:8 Light: 0: c:0 t:0 MatUp:7 WScale 1 Cull #version 320 es #extension GL_EXT_clip_cull_distance : enable // Adreno (TM) 512 - GLSL 320 precision highp float; #define gl_VertexIndex gl_VertexID #define splat3(x) vec3(x) #define mul(x, y) ((x) * (y)) in mediump vec4 w1, w2; in vec3 position; in mediump vec3 normal; in vec2 texcoord; in lowp vec4 color0; uniform mat4 u_proj; uniform mat4 u_world; uniform mat4 u_view; uniform mat4 u_bone0; uniform mat4 u_bone1; uniform mat4 u_bone2; uniform mat4 u_bone3; uniform mat4 u_bone4; uniform mat4 u_bone5; uniform mat4 u_bone6; uniform mat4 u_bone7; uniform vec4 u_uvscaleoffset; uniform vec3 u_lightpos0; uniform lowp vec3 u_lightambient0; uniform lowp vec3 u_lightdiffuse0; uniform lowp vec4 u_ambient; uniform lowp vec4 u_matspecular; uniform lowp vec3 u_matemissive; uniform lowp vec4 u_matambientalpha; uniform highp vec2 u_fogcoef; uniform highp vec4 u_depthRange; uniform highp vec4 u_cullRangeMin; uniform highp vec4 u_cullRangeMax; out lowp vec4 v_color0; out lowp vec3 v_color1; out mediump vec3 v_texcoord; out mediump float v_fogdepth; in float h_depth; in vec3 h_normal; vec3 normalizeOr001(vec3 v) { return length(v) == 0.0 ? vec3(0.0, 0.0, 1.0) : normalize(v); } void main() { mat4 skinMatrix = mul(w1.x, u_bone0) + mul(w1.y, u_bone1) + mul(w1.z, u_bone2) + mul(w1.w, u_bone3) + mul(w2.x, u_bone4) + mul(w2.y, u_bone5) + mul(w2.z, u_bone6) + mul(w2.w, u_bone7); vec3 skinnedpos = mul(vec4(position, 1.0), skinMatrix).xyz * 1.9921875; vec3 worldpos = mul(vec4(skinnedpos, 1.0), u_world).xyz; mediump vec3 skinnednormal = mul(vec4(normal, 0.0), skinMatrix).xyz * 1.9921875; mediump vec3 worldnormal = normalizeOr001(mul(vec4(skinnednormal, 0.0), u_world).xyz); vec4 viewPos = vec4(mul(vec4(worldpos, 1.0), u_view).xyz, 1.0); vec4 outPos = mul(u_proj, viewPos); lowp vec4 lightSum0 = u_ambient * color0 + vec4(u_matemissive, 0.0); vec3 toLight; lowp vec3 diffuse; mediump float ldot; toLight = u_lightpos0; ldot = dot(toLight, worldnormal); diffuse = (u_lightdiffuse0 * color0.rgb) * max(ldot, 0.0); lightSum0.rgb += (u_lightambient0 * color0.rgb + diffuse); v_color0 = clamp(lightSum0, 0.0, 1.0); v_color1 = splat3(0.0); v_texcoord = vec3(texcoord.xy * u_uvscaleoffset.xy, 0.0); v_fogdepth = (viewPos.z + u_fogcoef.x) * u_fogcoef.y; v_color0.rgb = vec3(0.0); vec3 projPos = outPos.xyz / outPos.w; float projZ = (projPos.z - u_depthRange.z) * u_depthRange.w; if (u_cullRangeMin.w <= 0.0 || projZ * outPos.w > -outPos.w) { if (projPos.x < u_cullRangeMin.x || projPos.y < u_cullRangeMin.y || projPos.x > u_cullRangeMax.x || projPos.y > u_cullRangeMax.y) { outPos.xyzw = u_cullRangeMax.wwww; } } if (u_cullRangeMin.w <= 0.0) { if (projPos.z < u_cullRangeMin.z || projPos.z > u_cullRangeMax.z) { outPos.xyzw = u_cullRangeMax.wwww; } } gl_ClipDistance[0] = projZ * outPos.w + outPos.w; if (u_cullRangeMin.w > 0.0) { gl_CullDistance[0] = projPos.z - u_cullRangeMin.z; gl_CullDistance[1] = u_cullRangeMax.z - projPos.z; } gl_Position = outPos; h_depth = outPos.z/outPos.w; h_normal = worldnormal*0.5+0.5; } 1 1 1 2023-01-15
Error in shader compilation: info: ERROR: 0:72: 'assign' : l-value required "h_depth" (can't modify an attribute) ERROR: 0:73: 'assign' : l-value required "h_normal" (can't modify an attribute) ERROR: 2 compilation errors. No code generated. 01170000:00000b3d HWX C T N LM Fog Tex Light: 0: c:0 t:0 MatUp:7 Cull #version 320 es #extension GL_EXT_clip_cull_distance : enable // Adreno (TM) 512 - GLSL 320 precision highp float; #define gl_VertexIndex gl_VertexID #define splat3(x) vec3(x) #define mul(x, y) ((x) * (y)) in vec3 position; in mediump vec3 normal; in vec2 texcoord; in lowp vec4 color0; uniform mat4 u_proj; uniform mat4 u_world; uniform mat4 u_view; uniform vec4 u_uvscaleoffset; uniform vec3 u_lightpos0; uniform lowp vec3 u_lightambient0; uniform lowp vec3 u_lightdiffuse0; uniform lowp vec4 u_ambient; uniform lowp vec4 u_matspecular; uniform lowp vec3 u_matemissive; uniform lowp vec4 u_matambientalpha; uniform highp vec2 u_fogcoef; uniform highp vec4 u_depthRange; uniform highp vec4 u_cullRangeMin; uniform highp vec4 u_cullRangeMax; out lowp vec4 v_color0; out lowp vec3 v_color1; out mediump vec3 v_texcoord; out mediump float v_fogdepth; in float h_depth; in vec3 h_normal; vec3 normalizeOr001(vec3 v) { return length(v) == 0.0 ? vec3(0.0, 0.0, 1.0) : normalize(v); } void main() { vec3 worldpos = mul(vec4(position, 1.0), u_world).xyz; mediump vec3 worldnormal = normalizeOr001(mul(vec4(normal, 0.0), u_world).xyz); vec4 viewPos = vec4(mul(vec4(worldpos, 1.0), u_view).xyz, 1.0); vec4 outPos = mul(u_proj, viewPos); lowp vec4 lightSum0 = u_ambient * color0 + vec4(u_matemissive, 0.0); vec3 toLight; lowp vec3 diffuse; mediump float ldot; toLight = u_lightpos0; ldot = dot(toLight, worldnormal); diffuse = (u_lightdiffuse0 * color0.rgb) * max(ldot, 0.0); lightSum0.rgb += (u_lightambient0 * color0.rgb + diffuse); v_color0 = clamp(lightSum0, 0.0, 1.0); v_color1 = splat3(0.0); v_texcoord = vec3(texcoord.xy * u_uvscaleoffset.xy, 0.0); v_fogdepth = (viewPos.z + u_fogcoef.x) * u_fogcoef.y; v_color0.rgb = vec3(0.0); vec3 projPos = outPos.xyz / outPos.w; float projZ = (projPos.z - u_depthRange.z) * u_depthRange.w; if (u_cullRangeMin.w <= 0.0 || projZ * outPos.w > -outPos.w) { if (projPos.x < u_cullRangeMin.x || projPos.y < u_cullRangeMin.y || projPos.x > u_cullRangeMax.x || projPos.y > u_cullRangeMax.y) { outPos.xyzw = u_cullRangeMax.wwww; } } if (u_cullRangeMin.w <= 0.0) { if (projPos.z < u_cullRangeMin.z || projPos.z > u_cullRangeMax.z) { outPos.xyzw = u_cullRangeMax.wwww; } } gl_ClipDistance[0] = projZ * outPos.w + outPos.w; if (u_cullRangeMin.w > 0.0) { gl_CullDistance[0] = projPos.z - u_cullRangeMin.z; gl_CullDistance[1] = u_cullRangeMax.z - projPos.z; } gl_Position = outPos; h_depth = outPos.z/outPos.w; h_normal = worldnormal*0.5+0.5; } 1 1 1 2023-01-15
Error in shader compilation: info: ERROR: 0:53: 'assign' : l-value required "h_depth" (can't modify an attribute) ERROR: 0:54: 'assign' : l-value required "h_normal" (can't modify an attribute) ERROR: 2 compilation errors. No code generated. 00000000:00000b38 HWX C T N Tex Cull #version 320 es #extension GL_EXT_clip_cull_distance : enable // Adreno (TM) 512 - GLSL 320 precision highp float; #define gl_VertexIndex gl_VertexID #define splat3(x) vec3(x) #define mul(x, y) ((x) * (y)) in vec3 position; in mediump vec3 normal; in vec2 texcoord; in lowp vec4 color0; uniform mat4 u_proj; uniform mat4 u_world; uniform mat4 u_view; uniform vec4 u_uvscaleoffset; uniform lowp vec4 u_matambientalpha; uniform highp vec4 u_depthRange; uniform highp vec4 u_cullRangeMin; uniform highp vec4 u_cullRangeMax; out lowp vec4 v_color0; out mediump vec3 v_texcoord; in float h_depth; in vec3 h_normal; vec3 normalizeOr001(vec3 v) { return length(v) == 0.0 ? vec3(0.0, 0.0, 1.0) : normalize(v); } void main() { vec3 worldpos = mul(vec4(position, 1.0), u_world).xyz; mediump vec3 worldnormal = normalizeOr001(mul(vec4(normal, 0.0), u_world).xyz); vec4 viewPos = vec4(mul(vec4(worldpos, 1.0), u_view).xyz, 1.0); vec4 outPos = mul(u_proj, viewPos); v_color0 = color0; v_texcoord = vec3(texcoord.xy * u_uvscaleoffset.xy, 0.0); v_color0.rgb = vec3(0.0); vec3 projPos = outPos.xyz / outPos.w; float projZ = (projPos.z - u_depthRange.z) * u_depthRange.w; if (u_cullRangeMin.w <= 0.0 || projZ * outPos.w > -outPos.w) { if (projPos.x < u_cullRangeMin.x || projPos.y < u_cullRangeMin.y || projPos.x > u_cullRangeMax.x || projPos.y > u_cullRangeMax.y) { outPos.xyzw = u_cullRangeMax.wwww; } } if (u_cullRangeMin.w <= 0.0) { if (projPos.z < u_cullRangeMin.z || projPos.z > u_cullRangeMax.z) { outPos.xyzw = u_cullRangeMax.wwww; } } gl_ClipDistance[0] = projZ * outPos.w + outPos.w; if (u_cullRangeMin.w > 0.0) { gl_CullDistance[0] = projPos.z - u_cullRangeMin.z; gl_CullDistance[1] = u_cullRangeMax.z - projPos.z; } gl_Position = outPos; h_depth = outPos.z/outPos.w; h_normal = worldnormal*0.5+0.5; } 1 1 1 2023-01-15
Error in shader compilation: info: ERROR: 0:18: 'assign' : l-value required "h_depth" (can't modify an attribute) ERROR: 0:19: 'assign' : l-value required "h_normal" (can't modify an attribute) ERROR: 2 compilation errors. No code generated. 00000000:0000000a THR C #version 320 es // Adreno (TM) 512 - GLSL 320 precision highp float; #define gl_VertexIndex gl_VertexID #define splat3(x) vec3(x) #define mul(x, y) ((x) * (y)) in vec4 position; in lowp vec4 color0; uniform mat4 u_proj_through; out lowp vec4 v_color0; in float h_depth; in vec3 h_normal; void main() { v_color0 = color0; vec4 outPos = mul(u_proj_through, vec4(position.xyz, 1.0)); v_color0.rgb = vec3(0.0); gl_Position = outPos; h_depth = outPos.z/outPos.w; h_normal = vec3(-1.0); } 1 1 1 2023-01-15
Error in shader compilation: info: Vertex shader compilation failed. ERROR: 0:134: 'comp' : redefinition ERROR: 0:135: 'type' : redefinition ERROR: 0:183: 'comp' : redefinition ERROR: 0:184: 'type' : redefinition ERROR: 0:232: 'comp' : redefinition ERROR: 0:233: 'type' : redefinition ERROR: 6 compilation errors. No code generated. 03000000:c1c00b20 HWX T N Bones:8 Light: LightUberShader WScale 1 Cull #version 300 es // Driver: Adreno (TM) 305 - GLSL 300 precision highp float; #define gl_VertexIndex gl_VertexID #define splat3(x) vec3(x) #define mul(x, y) ((x) * (y)) // 03000000:c1c00b20 HWX T N Bones:8 Light: LightUberShader WScale 1 Cull in mediump vec4 w1, w2; in vec3 position; in mediump vec3 normal; uniform mat4 u_proj; uniform mat4 u_world; uniform mat4 u_view; uniform mat4 u_bone0; uniform mat4 u_bone1; uniform mat4 u_bone2; uniform mat4 u_bone3; uniform mat4 u_bone4; uniform mat4 u_bone5; uniform mat4 u_bone6; uniform mat4 u_bone7; uniform uint u_lightControl; uniform vec3 u_lightpos0; uniform mediump vec3 u_lightatt0; uniform mediump vec3 u_lightdir0; uniform mediump vec2 u_lightangle_spotCoef0; uniform lowp vec3 u_lightambient0; uniform lowp vec3 u_lightdiffuse0; uniform lowp vec3 u_lightspecular0; uniform vec3 u_lightpos1; uniform mediump vec3 u_lightatt1; uniform mediump vec3 u_lightdir1; uniform mediump vec2 u_lightangle_spotCoef1; uniform lowp vec3 u_lightambient1; uniform lowp vec3 u_lightdiffuse1; uniform lowp vec3 u_lightspecular1; uniform vec3 u_lightpos2; uniform mediump vec3 u_lightatt2; uniform mediump vec3 u_lightdir2; uniform mediump vec2 u_lightangle_spotCoef2; uniform lowp vec3 u_lightambient2; uniform lowp vec3 u_lightdiffuse2; uniform lowp vec3 u_lightspecular2; uniform vec3 u_lightpos3; uniform mediump vec3 u_lightatt3; uniform mediump vec3 u_lightdir3; uniform mediump vec2 u_lightangle_spotCoef3; uniform lowp vec3 u_lightambient3; uniform lowp vec3 u_lightdiffuse3; uniform lowp vec3 u_lightspecular3; uniform lowp vec4 u_ambient; uniform lowp vec3 u_matdiffuse; uniform lowp vec4 u_matspecular; uniform lowp vec3 u_matemissive; uniform lowp vec4 u_matambientalpha; uniform highp vec2 u_fogcoef; uniform highp vec4 u_depthRange; uniform highp vec4 u_cullRangeMin; uniform highp vec4 u_cullRangeMax; out lowp vec4 v_color0; out mediump float v_fogdepth; vec3 normalizeOr001(vec3 v) { return length(v) == 0.0 ? vec3(0.0, 0.0, 1.0) : normalize(v); } void main() { mat4 skinMatrix = mul(w1.x, u_bone0) + mul(w1.y, u_bone1) + mul(w1.z, u_bone2) + mul(w1.w, u_bone3) + mul(w2.x, u_bone4) + mul(w2.y, u_bone5) + mul(w2.z, u_bone6) + mul(w2.w, u_bone7); vec3 skinnedpos = mul(vec4(position, 1.0), skinMatrix).xyz * 1.9921875; vec3 worldpos = mul(vec4(skinnedpos, 1.0), u_world).xyz; mediump vec3 skinnednormal = mul(vec4(normal, 0.0), skinMatrix).xyz * 1.9921875; mediump vec3 worldnormal = normalizeOr001(mul(vec4(skinnednormal, 0.0), u_world).xyz); vec4 viewPos = vec4(mul(vec4(worldpos, 1.0), u_view).xyz, 1.0); vec4 outPos = mul(u_proj, viewPos); vec4 ambientColor = u_matambientalpha; vec3 diffuseColor = u_matdiffuse.rgb; vec3 specularColor = u_matspecular.rgb; lowp vec4 lightSum0 = u_ambient * ambientColor + vec4(u_matemissive, 0.0); lowp vec3 lightSum1 = splat3(0.0); vec3 toLight; lowp vec3 diffuse; float distance; lowp float lightScale; mediump float ldot; lowp float angle; if ((u_lightControl & 1u) != 0x0u) { uint comp = (u_lightControl >> 0x04u) & 0x3u; uint type = (u_lightControl >> 0x06u) & 0x3u; if (type == 0x0u) { toLight = u_lightpos0; } else { toLight = u_lightpos0 - worldpos; distance = length(toLight); toLight /= distance; } ldot = dot(toLight, worldnormal); if (comp == 0x2u) { if (u_matspecular.a <= 0.0) { ldot = 1.0; } else { ldot = pow(max(ldot, 0.0), u_matspecular.a); } } switch (int(type)) { case 1: lightScale = clamp(1.0 / dot(u_lightatt0, vec3(1.0, distance, distance*distance)), 0.0, 1.0); break; case 2: angle = length(u_lightdir0 1 1 1 2023-01-13
Error in shader compilation: info: Vertex shader compilation failed. ERROR: 0:137: 'comp' : redefinition ERROR: 0:138: 'type' : redefinition ERROR: 0:186: 'comp' : redefinition ERROR: 0:187: 'type' : redefinition ERROR: 0:235: 'comp' : redefinition ERROR: 0:236: 'type' : redefinition ERROR: 6 compilation errors. No code generated. 03000000:c1c00b30 HWX T N Tex Bones:8 Light: LightUberShader WScale 1 Cull #version 300 es // Driver: Adreno (TM) 305 - GLSL 300 precision highp float; #define gl_VertexIndex gl_VertexID #define splat3(x) vec3(x) #define mul(x, y) ((x) * (y)) // 03000000:c1c00b30 HWX T N Tex Bones:8 Light: LightUberShader WScale 1 Cull in mediump vec4 w1, w2; in vec3 position; in mediump vec3 normal; in vec2 texcoord; uniform mat4 u_proj; uniform mat4 u_world; uniform mat4 u_view; uniform mat4 u_bone0; uniform mat4 u_bone1; uniform mat4 u_bone2; uniform mat4 u_bone3; uniform mat4 u_bone4; uniform mat4 u_bone5; uniform mat4 u_bone6; uniform mat4 u_bone7; uniform vec4 u_uvscaleoffset; uniform uint u_lightControl; uniform vec3 u_lightpos0; uniform mediump vec3 u_lightatt0; uniform mediump vec3 u_lightdir0; uniform mediump vec2 u_lightangle_spotCoef0; uniform lowp vec3 u_lightambient0; uniform lowp vec3 u_lightdiffuse0; uniform lowp vec3 u_lightspecular0; uniform vec3 u_lightpos1; uniform mediump vec3 u_lightatt1; uniform mediump vec3 u_lightdir1; uniform mediump vec2 u_lightangle_spotCoef1; uniform lowp vec3 u_lightambient1; uniform lowp vec3 u_lightdiffuse1; uniform lowp vec3 u_lightspecular1; uniform vec3 u_lightpos2; uniform mediump vec3 u_lightatt2; uniform mediump vec3 u_lightdir2; uniform mediump vec2 u_lightangle_spotCoef2; uniform lowp vec3 u_lightambient2; uniform lowp vec3 u_lightdiffuse2; uniform lowp vec3 u_lightspecular2; uniform vec3 u_lightpos3; uniform mediump vec3 u_lightatt3; uniform mediump vec3 u_lightdir3; uniform mediump vec2 u_lightangle_spotCoef3; uniform lowp vec3 u_lightambient3; uniform lowp vec3 u_lightdiffuse3; uniform lowp vec3 u_lightspecular3; uniform lowp vec4 u_ambient; uniform lowp vec3 u_matdiffuse; uniform lowp vec4 u_matspecular; uniform lowp vec3 u_matemissive; uniform lowp vec4 u_matambientalpha; uniform highp vec2 u_fogcoef; uniform highp vec4 u_depthRange; uniform highp vec4 u_cullRangeMin; uniform highp vec4 u_cullRangeMax; out lowp vec4 v_color0; out mediump vec3 v_texcoord; out mediump float v_fogdepth; vec3 normalizeOr001(vec3 v) { return length(v) == 0.0 ? vec3(0.0, 0.0, 1.0) : normalize(v); } void main() { mat4 skinMatrix = mul(w1.x, u_bone0) + mul(w1.y, u_bone1) + mul(w1.z, u_bone2) + mul(w1.w, u_bone3) + mul(w2.x, u_bone4) + mul(w2.y, u_bone5) + mul(w2.z, u_bone6) + mul(w2.w, u_bone7); vec3 skinnedpos = mul(vec4(position, 1.0), skinMatrix).xyz * 1.9921875; vec3 worldpos = mul(vec4(skinnedpos, 1.0), u_world).xyz; mediump vec3 skinnednormal = mul(vec4(normal, 0.0), skinMatrix).xyz * 1.9921875; mediump vec3 worldnormal = normalizeOr001(mul(vec4(skinnednormal, 0.0), u_world).xyz); vec4 viewPos = vec4(mul(vec4(worldpos, 1.0), u_view).xyz, 1.0); vec4 outPos = mul(u_proj, viewPos); vec4 ambientColor = u_matambientalpha; vec3 diffuseColor = u_matdiffuse.rgb; vec3 specularColor = u_matspecular.rgb; lowp vec4 lightSum0 = u_ambient * ambientColor + vec4(u_matemissive, 0.0); lowp vec3 lightSum1 = splat3(0.0); vec3 toLight; lowp vec3 diffuse; float distance; lowp float lightScale; mediump float ldot; lowp float angle; if ((u_lightControl & 1u) != 0x0u) { uint comp = (u_lightControl >> 0x04u) & 0x3u; uint type = (u_lightControl >> 0x06u) & 0x3u; if (type == 0x0u) { toLight = u_lightpos0; } else { toLight = u_lightpos0 - worldpos; distance = length(toLight); toLight /= distance; } ldot = dot(toLight, worldnormal); if (comp == 0x2u) { if (u_matspecular.a <= 0.0) { ldot = 1.0; } else { ldot = pow(max(ldot, 0.0), u_matspecular.a); } } switch (int(type)) { case 1: lightScale = clamp(1.0 / dot(u_lightatt0, vec3(1.0, distance, dist 1 1 1 2023-01-13
Error in shader compilation: info: 0:46: S0027: Cannot modify an input variable 00000000:00010130 HWX Tex TexProjPos UVMtx Cull #version 320 es // Mali-G52 - GLSL 320 precision highp float; #define gl_VertexIndex gl_VertexID #define splat3(x) vec3(x) #define mul(x, y) ((x) * (y)) in vec3 position; uniform mat4 u_proj; uniform mat4 u_world; uniform mat4 u_view; uniform mediump mat4 u_texmtx; uniform vec4 u_uvscaleoffset; uniform lowp vec4 u_matambientalpha; uniform highp vec4 u_depthRange; uniform highp vec4 u_cullRangeMin; uniform highp vec4 u_cullRangeMax; out lowp vec4 v_color0; out mediump vec3 v_texcoord; in float h_depth; vec3 normalizeOr001(vec3 v) { return length(v) == 0.0 ? vec3(0.0, 0.0, 1.0) : normalize(v); } void main() { vec3 worldpos = mul(vec4(position, 1.0), u_world).xyz; mediump vec3 worldnormal = vec3(0.0, 0.0, 1.0); vec4 viewPos = vec4(mul(vec4(worldpos, 1.0), u_view).xyz, 1.0); float rotAngle = 0.017453; viewPos.yz = vec2(viewPos.y*cos(rotAngle)+viewPos.z*sin(rotAngle), viewPos.z*cos(rotAngle)-viewPos.y*sin(rotAngle)); viewPos.xy *= 1.106729; vec4 outPos = mul(u_proj, viewPos); v_color0 = u_matambientalpha; v_texcoord = mul(vec4(position, 1.0), u_texmtx).xyz * vec3(u_uvscaleoffset.xy, 1.0); vec3 projPos = outPos.xyz / outPos.w; float projZ = (projPos.z - u_depthRange.z) * u_depthRange.w; if (u_cullRangeMin.w <= 0.0 || projZ * outPos.w > -outPos.w) { if (projPos.x < u_cullRangeMin.x || projPos.y < u_cullRangeMin.y || projPos.x > u_cullRangeMax.x || projPos.y > u_cullRangeMax.y) { outPos.xyzw = u_cullRangeMax.wwww; } } if (u_cullRangeMin.w <= 0.0) { if (projPos.z < u_cullRangeMin.z || projPos.z > u_cullRangeMax.z) { outPos.xyzw = u_cullRangeMax.wwww; } } gl_Position = outPos; h_depth = outPos.z/outPos.w; } 1 1 1 2023-01-12
Error in shader compilation: info: 0:46: S0027: Cannot modify an input variable 00000000:00000930 HWX T Tex Cull #version 320 es // Mali-G52 - GLSL 320 precision highp float; #define gl_VertexIndex gl_VertexID #define splat3(x) vec3(x) #define mul(x, y) ((x) * (y)) in vec3 position; in vec2 texcoord; uniform mat4 u_proj; uniform mat4 u_world; uniform mat4 u_view; uniform vec4 u_uvscaleoffset; uniform lowp vec4 u_matambientalpha; uniform highp vec4 u_depthRange; uniform highp vec4 u_cullRangeMin; uniform highp vec4 u_cullRangeMax; out lowp vec4 v_color0; out mediump vec3 v_texcoord; in float h_depth; vec3 normalizeOr001(vec3 v) { return length(v) == 0.0 ? vec3(0.0, 0.0, 1.0) : normalize(v); } void main() { vec3 worldpos = mul(vec4(position, 1.0), u_world).xyz; mediump vec3 worldnormal = vec3(0.0, 0.0, 1.0); vec4 viewPos = vec4(mul(vec4(worldpos, 1.0), u_view).xyz, 1.0); float rotAngle = 0.017453; viewPos.yz = vec2(viewPos.y*cos(rotAngle)+viewPos.z*sin(rotAngle), viewPos.z*cos(rotAngle)-viewPos.y*sin(rotAngle)); viewPos.xy *= 1.106729; vec4 outPos = mul(u_proj, viewPos); v_color0 = u_matambientalpha; v_texcoord = vec3(texcoord.xy * u_uvscaleoffset.xy, 0.0); vec3 projPos = outPos.xyz / outPos.w; float projZ = (projPos.z - u_depthRange.z) * u_depthRange.w; if (u_cullRangeMin.w <= 0.0 || projZ * outPos.w > -outPos.w) { if (projPos.x < u_cullRangeMin.x || projPos.y < u_cullRangeMin.y || projPos.x > u_cullRangeMax.x || projPos.y > u_cullRangeMax.y) { outPos.xyzw = u_cullRangeMax.wwww; } } if (u_cullRangeMin.w <= 0.0) { if (projPos.z < u_cullRangeMin.z || projPos.z > u_cullRangeMax.z) { outPos.xyzw = u_cullRangeMax.wwww; } } gl_Position = outPos; h_depth = outPos.z/outPos.w; } 1 1 1 2023-01-12
Error in shader compilation: info: 0:47: S0027: Cannot modify an input variable 00000000:00000938 HWX C T Tex Cull #version 320 es // Mali-G52 - GLSL 320 precision highp float; #define gl_VertexIndex gl_VertexID #define splat3(x) vec3(x) #define mul(x, y) ((x) * (y)) in vec3 position; in vec2 texcoord; in lowp vec4 color0; uniform mat4 u_proj; uniform mat4 u_world; uniform mat4 u_view; uniform vec4 u_uvscaleoffset; uniform lowp vec4 u_matambientalpha; uniform highp vec4 u_depthRange; uniform highp vec4 u_cullRangeMin; uniform highp vec4 u_cullRangeMax; out lowp vec4 v_color0; out mediump vec3 v_texcoord; in float h_depth; vec3 normalizeOr001(vec3 v) { return length(v) == 0.0 ? vec3(0.0, 0.0, 1.0) : normalize(v); } void main() { vec3 worldpos = mul(vec4(position, 1.0), u_world).xyz; mediump vec3 worldnormal = vec3(0.0, 0.0, 1.0); vec4 viewPos = vec4(mul(vec4(worldpos, 1.0), u_view).xyz, 1.0); float rotAngle = 0.017453; viewPos.yz = vec2(viewPos.y*cos(rotAngle)+viewPos.z*sin(rotAngle), viewPos.z*cos(rotAngle)-viewPos.y*sin(rotAngle)); viewPos.xy *= 1.106729; vec4 outPos = mul(u_proj, viewPos); v_color0 = color0; v_texcoord = vec3(texcoord.xy * u_uvscaleoffset.xy, 0.0); vec3 projPos = outPos.xyz / outPos.w; float projZ = (projPos.z - u_depthRange.z) * u_depthRange.w; if (u_cullRangeMin.w <= 0.0 || projZ * outPos.w > -outPos.w) { if (projPos.x < u_cullRangeMin.x || projPos.y < u_cullRangeMin.y || projPos.x > u_cullRangeMax.x || projPos.y > u_cullRangeMax.y) { outPos.xyzw = u_cullRangeMax.wwww; } } if (u_cullRangeMin.w <= 0.0) { if (projPos.z < u_cullRangeMin.z || projPos.z > u_cullRangeMax.z) { outPos.xyzw = u_cullRangeMax.wwww; } } gl_Position = outPos; h_depth = outPos.z/outPos.w; } 1 1 1 2023-01-12
Error in shader compilation: info: Vertex shader compilation failed. ERROR: 0:76: '!=' : wrong operand types no operation '!=' exists that takes a left-hand operand of type 'uint' and a right operand of type 'const int' (or there is no acceptable conversion) ERROR: 0:79: '==' : wrong operand types no operation '==' exists that takes a left-hand operand of type 'uint' and a right operand of type 'const int' (or there is no acceptable conversion) ERROR: 0:125: '!=' : wrong operand types no operation '!=' exists that takes a left-hand operand of type 'uint' and a right operand of type 'const int' (or there is no acceptable conversion) ERROR: 0:128: '==' : wrong operand types no operation '==' exists that takes a left-hand operand of type 'uint' and a right operand of type 'const int' (or there is no acceptable conversion) ERROR: 0:174: '!=' : wrong operand types no operation '!=' exists that takes a left-hand operand of type 'uint' and a right operand of type 'const int' (or there is no acceptable conversion) ERROR: 0:177: '==' : wron 01000000:80000b31 HWX T N LM Tex Light: LightUberShader Cull #version 300 es // Driver: Adreno (TM) 330 - GLSL 300 precision highp float; #define gl_VertexIndex gl_VertexID #define splat3(x) vec3(x) #define mul(x, y) ((x) * (y)) // 01000000:80000b31 HWX T N LM Tex Light: LightUberShader Cull in vec3 position; in mediump vec3 normal; in vec2 texcoord; uniform mat4 u_proj; uniform mat4 u_world; uniform mat4 u_view; uniform vec4 u_uvscaleoffset; uniform uint u_lightControl; uniform vec3 u_lightpos0; uniform mediump vec3 u_lightatt0; uniform mediump vec3 u_lightdir0; uniform mediump vec2 u_lightangle_spotCoef0; uniform lowp vec3 u_lightambient0; uniform lowp vec3 u_lightdiffuse0; uniform lowp vec3 u_lightspecular0; uniform vec3 u_lightpos1; uniform mediump vec3 u_lightatt1; uniform mediump vec3 u_lightdir1; uniform mediump vec2 u_lightangle_spotCoef1; uniform lowp vec3 u_lightambient1; uniform lowp vec3 u_lightdiffuse1; uniform lowp vec3 u_lightspecular1; uniform vec3 u_lightpos2; uniform mediump vec3 u_lightatt2; uniform mediump vec3 u_lightdir2; uniform mediump vec2 u_lightangle_spotCoef2; uniform lowp vec3 u_lightambient2; uniform lowp vec3 u_lightdiffuse2; uniform lowp vec3 u_lightspecular2; uniform vec3 u_lightpos3; uniform mediump vec3 u_lightatt3; uniform mediump vec3 u_lightdir3; uniform mediump vec2 u_lightangle_spotCoef3; uniform lowp vec3 u_lightambient3; uniform lowp vec3 u_lightdiffuse3; uniform lowp vec3 u_lightspecular3; uniform lowp vec4 u_ambient; uniform lowp vec3 u_matdiffuse; uniform lowp vec4 u_matspecular; uniform lowp vec3 u_matemissive; uniform lowp vec4 u_matambientalpha; uniform highp vec2 u_fogcoef; uniform highp vec4 u_depthRange; uniform highp vec4 u_cullRangeMin; uniform highp vec4 u_cullRangeMax; out lowp vec4 v_color0; out lowp vec3 v_color1; out mediump vec3 v_texcoord; out mediump float v_fogdepth; vec3 normalizeOr001(vec3 v) { return length(v) == 0.0 ? vec3(0.0, 0.0, 1.0) : normalize(v); } void main() { vec3 worldpos = mul(vec4(position, 1.0), u_world).xyz; mediump vec3 worldnormal = normalizeOr001(mul(vec4(normal, 0.0), u_world).xyz); vec4 viewPos = vec4(mul(vec4(worldpos, 1.0), u_view).xyz, 1.0); vec4 outPos = mul(u_proj, viewPos); vec4 ambientColor = u_matambientalpha; vec3 diffuseColor = u_matdiffuse.rgb; vec3 specularColor = u_matspecular.rgb; lowp vec4 lightSum0 = u_ambient * ambientColor + vec4(u_matemissive, 0.0); lowp vec3 lightSum1 = splat3(0.0); vec3 toLight; lowp vec3 diffuse; float distance; lowp float lightScale; mediump float ldot; lowp float angle; if ((u_lightControl & 1u) != 0u) { uint comp = (u_lightControl >> 4) & 3u; uint type = (u_lightControl >> 6) & 3u; if (type == 0u) { toLight = u_lightpos0; } else { toLight = u_lightpos0 - worldpos; distance = length(toLight); toLight /= distance; } ldot = dot(toLight, worldnormal); if (comp == 2u) { if (u_matspecular.a <= 0.0) { ldot = 1.0; } else { ldot = pow(max(ldot, 0.0), 1 1 1 2023-01-11
Error in shader compilation: info: Vertex shader compilation failed. ERROR: 0:65: '!=' : wrong operand types no operation '!=' exists that takes a left-hand operand of type 'uint' and a right operand of type 'const int' (or there is no acceptable conversion) ERROR: 0:66: '!=' : wrong operand types no operation '!=' exists that takes a left-hand operand of type 'uint' and a right operand of type 'const int' (or there is no acceptable conversion) ERROR: 0:67: '!=' : wrong operand types no operation '!=' exists that takes a left-hand operand of type 'uint' and a right operand of type 'const int' (or there is no acceptable conversion) ERROR: 0:76: '!=' : wrong operand types no operation '!=' exists that takes a left-hand operand of type 'uint' and a right operand of type 'const int' (or there is no acceptable conversion) ERROR: 0:79: '==' : wrong operand types no operation '==' exists that takes a left-hand operand of type 'uint' and a right operand of type 'const int' (or there is no acceptable conversion) ERROR: 0:125: '!=' : wrong o 01000000:80000939 HWX C T LM Tex Light: LightUberShader Cull #version 300 es // Driver: Adreno (TM) 330 - GLSL 300 precision highp float; #define gl_VertexIndex gl_VertexID #define splat3(x) vec3(x) #define mul(x, y) ((x) * (y)) // 01000000:80000939 HWX C T LM Tex Light: LightUberShader Cull in vec3 position; in vec2 texcoord; in lowp vec4 color0; uniform mat4 u_proj; uniform mat4 u_world; uniform mat4 u_view; uniform vec4 u_uvscaleoffset; uniform uint u_lightControl; uniform vec3 u_lightpos0; uniform mediump vec3 u_lightatt0; uniform mediump vec3 u_lightdir0; uniform mediump vec2 u_lightangle_spotCoef0; uniform lowp vec3 u_lightambient0; uniform lowp vec3 u_lightdiffuse0; uniform lowp vec3 u_lightspecular0; uniform vec3 u_lightpos1; uniform mediump vec3 u_lightatt1; uniform mediump vec3 u_lightdir1; uniform mediump vec2 u_lightangle_spotCoef1; uniform lowp vec3 u_lightambient1; uniform lowp vec3 u_lightdiffuse1; uniform lowp vec3 u_lightspecular1; uniform vec3 u_lightpos2; uniform mediump vec3 u_lightatt2; uniform mediump vec3 u_lightdir2; uniform mediump vec2 u_lightangle_spotCoef2; uniform lowp vec3 u_lightambient2; uniform lowp vec3 u_lightdiffuse2; uniform lowp vec3 u_lightspecular2; uniform vec3 u_lightpos3; uniform mediump vec3 u_lightatt3; uniform mediump vec3 u_lightdir3; uniform mediump vec2 u_lightangle_spotCoef3; uniform lowp vec3 u_lightambient3; uniform lowp vec3 u_lightdiffuse3; uniform lowp vec3 u_lightspecular3; uniform lowp vec4 u_ambient; uniform lowp vec3 u_matdiffuse; uniform lowp vec4 u_matspecular; uniform lowp vec3 u_matemissive; uniform lowp vec4 u_matambientalpha; uniform highp vec2 u_fogcoef; uniform highp vec4 u_depthRange; uniform highp vec4 u_cullRangeMin; uniform highp vec4 u_cullRangeMax; out lowp vec4 v_color0; out lowp vec3 v_color1; out mediump vec3 v_texcoord; out mediump float v_fogdepth; vec3 normalizeOr001(vec3 v) { return length(v) == 0.0 ? vec3(0.0, 0.0, 1.0) : normalize(v); } void main() { vec3 worldpos = mul(vec4(position, 1.0), u_world).xyz; mediump vec3 worldnormal = normalizeOr001(mul(vec4(0.0, 0.0, 1.0, 0.0), u_world).xyz); vec4 viewPos = vec4(mul(vec4(worldpos, 1.0), u_view).xyz, 1.0); vec4 outPos = mul(u_proj, viewPos); vec4 ambientColor = ((u_lightControl & (1u << 20u)) != 0u) ? color0 : u_matambientalpha; vec3 diffuseColor = ((u_lightControl & (1u << 21u)) != 0u) ? color0.rgb : u_matdiffuse; vec3 specularColor = ((u_lightControl & (1u << 22u)) != 0u) ? color0.rgb : u_matspecular.rgb; lowp vec4 lightSum0 = u_ambient * ambientColor + vec4(u_matemissive, 0.0); lowp vec3 lightSum1 = splat3(0.0); vec3 toLight; lowp vec3 diffuse; float distance; lowp float lightScale; mediump float ldot; lowp float angle; if ((u_lightControl & 1u) != 0u) { uint comp = (u_lightControl >> 4) & 3u; uint type = (u_lightControl >> 6) & 3u; if (type == 0u) { toLight = u_lightpos0; } else { toLight = u_lightpos0 - worldpos; distance = length(toLight); toLight /= distance; } ldo 1 1 1 2023-01-11
Error in shader compilation: info: ERROR: 0:50: 'assign' : l-value required "h_depth" (can't modify an attribute) ERROR: 1 compilation errors. No code generated. 00000000:00010130 HWX Tex TexProjPos UVMtx Cull #version 320 es #extension GL_EXT_clip_cull_distance : enable // Adreno (TM) 506 - GLSL 320 precision highp float; #define gl_VertexIndex gl_VertexID #define splat3(x) vec3(x) #define mul(x, y) ((x) * (y)) in vec3 position; uniform mat4 u_proj; uniform mat4 u_world; uniform mat4 u_view; uniform mediump mat4 u_texmtx; uniform vec4 u_uvscaleoffset; uniform lowp vec4 u_matambientalpha; uniform highp vec4 u_depthRange; uniform highp vec4 u_cullRangeMin; uniform highp vec4 u_cullRangeMax; out lowp vec4 v_color0; out mediump vec3 v_texcoord; in float h_depth; vec3 normalizeOr001(vec3 v) { return length(v) == 0.0 ? vec3(0.0, 0.0, 1.0) : normalize(v); } void main() { vec3 worldpos = mul(vec4(position, 1.0), u_world).xyz; mediump vec3 worldnormal = vec3(0.0, 0.0, 1.0); vec4 viewPos = vec4(mul(vec4(worldpos, 1.0), u_view).xyz, 1.0); viewPos.xy *= 0.495167; vec4 outPos = mul(u_proj, viewPos); v_color0 = u_matambientalpha; v_texcoord = mul(vec4(position, 1.0), u_texmtx).xyz * vec3(u_uvscaleoffset.xy, 1.0); vec3 projPos = outPos.xyz / outPos.w; float projZ = (projPos.z - u_depthRange.z) * u_depthRange.w; if (u_cullRangeMin.w <= 0.0 || projZ * outPos.w > -outPos.w) { if (projPos.x < u_cullRangeMin.x || projPos.y < u_cullRangeMin.y || projPos.x > u_cullRangeMax.x || projPos.y > u_cullRangeMax.y) { outPos.xyzw = u_cullRangeMax.wwww; } } if (u_cullRangeMin.w <= 0.0) { if (projPos.z < u_cullRangeMin.z || projPos.z > u_cullRangeMax.z) { outPos.xyzw = u_cullRangeMax.wwww; } } gl_ClipDistance[0] = projZ * outPos.w + outPos.w; if (u_cullRangeMin.w > 0.0) { gl_CullDistance[0] = projPos.z - u_cullRangeMin.z; gl_CullDistance[1] = u_cullRangeMax.z - projPos.z; } gl_Position = outPos; h_depth = outPos.z/outPos.w; } 1 1 1 2023-01-10
Error in shader compilation: info: ERROR: 0:50: 'assign' : l-value required "h_depth" (can't modify an attribute) ERROR: 1 compilation errors. No code generated. 00000000:00000930 HWX T Tex Cull #version 320 es #extension GL_EXT_clip_cull_distance : enable // Adreno (TM) 506 - GLSL 320 precision highp float; #define gl_VertexIndex gl_VertexID #define splat3(x) vec3(x) #define mul(x, y) ((x) * (y)) in vec3 position; in vec2 texcoord; uniform mat4 u_proj; uniform mat4 u_world; uniform mat4 u_view; uniform vec4 u_uvscaleoffset; uniform lowp vec4 u_matambientalpha; uniform highp vec4 u_depthRange; uniform highp vec4 u_cullRangeMin; uniform highp vec4 u_cullRangeMax; out lowp vec4 v_color0; out mediump vec3 v_texcoord; in float h_depth; vec3 normalizeOr001(vec3 v) { return length(v) == 0.0 ? vec3(0.0, 0.0, 1.0) : normalize(v); } void main() { vec3 worldpos = mul(vec4(position, 1.0), u_world).xyz; mediump vec3 worldnormal = vec3(0.0, 0.0, 1.0); vec4 viewPos = vec4(mul(vec4(worldpos, 1.0), u_view).xyz, 1.0); viewPos.xy *= 0.495167; vec4 outPos = mul(u_proj, viewPos); v_color0 = u_matambientalpha; v_texcoord = vec3(texcoord.xy * u_uvscaleoffset.xy, 0.0); vec3 projPos = outPos.xyz / outPos.w; float projZ = (projPos.z - u_depthRange.z) * u_depthRange.w; if (u_cullRangeMin.w <= 0.0 || projZ * outPos.w > -outPos.w) { if (projPos.x < u_cullRangeMin.x || projPos.y < u_cullRangeMin.y || projPos.x > u_cullRangeMax.x || projPos.y > u_cullRangeMax.y) { outPos.xyzw = u_cullRangeMax.wwww; } } if (u_cullRangeMin.w <= 0.0) { if (projPos.z < u_cullRangeMin.z || projPos.z > u_cullRangeMax.z) { outPos.xyzw = u_cullRangeMax.wwww; } } gl_ClipDistance[0] = projZ * outPos.w + outPos.w; if (u_cullRangeMin.w > 0.0) { gl_CullDistance[0] = projPos.z - u_cullRangeMin.z; gl_CullDistance[1] = u_cullRangeMax.z - projPos.z; } gl_Position = outPos; h_depth = outPos.z/outPos.w; } 1 1 1 2023-01-10
Error in shader compilation: info: ERROR: 0:51: 'assign' : l-value required "h_depth" (can't modify an attribute) ERROR: 1 compilation errors. No code generated. 00000000:00000938 HWX C T Tex Cull #version 320 es #extension GL_EXT_clip_cull_distance : enable // Adreno (TM) 506 - GLSL 320 precision highp float; #define gl_VertexIndex gl_VertexID #define splat3(x) vec3(x) #define mul(x, y) ((x) * (y)) in vec3 position; in vec2 texcoord; in lowp vec4 color0; uniform mat4 u_proj; uniform mat4 u_world; uniform mat4 u_view; uniform vec4 u_uvscaleoffset; uniform lowp vec4 u_matambientalpha; uniform highp vec4 u_depthRange; uniform highp vec4 u_cullRangeMin; uniform highp vec4 u_cullRangeMax; out lowp vec4 v_color0; out mediump vec3 v_texcoord; in float h_depth; vec3 normalizeOr001(vec3 v) { return length(v) == 0.0 ? vec3(0.0, 0.0, 1.0) : normalize(v); } void main() { vec3 worldpos = mul(vec4(position, 1.0), u_world).xyz; mediump vec3 worldnormal = vec3(0.0, 0.0, 1.0); vec4 viewPos = vec4(mul(vec4(worldpos, 1.0), u_view).xyz, 1.0); viewPos.xy *= 0.495167; vec4 outPos = mul(u_proj, viewPos); v_color0 = color0; v_texcoord = vec3(texcoord.xy * u_uvscaleoffset.xy, 0.0); vec3 projPos = outPos.xyz / outPos.w; float projZ = (projPos.z - u_depthRange.z) * u_depthRange.w; if (u_cullRangeMin.w <= 0.0 || projZ * outPos.w > -outPos.w) { if (projPos.x < u_cullRangeMin.x || projPos.y < u_cullRangeMin.y || projPos.x > u_cullRangeMax.x || projPos.y > u_cullRangeMax.y) { outPos.xyzw = u_cullRangeMax.wwww; } } if (u_cullRangeMin.w <= 0.0) { if (projPos.z < u_cullRangeMin.z || projPos.z > u_cullRangeMax.z) { outPos.xyzw = u_cullRangeMax.wwww; } } gl_ClipDistance[0] = projZ * outPos.w + outPos.w; if (u_cullRangeMin.w > 0.0) { gl_CullDistance[0] = projPos.z - u_cullRangeMin.z; gl_CullDistance[1] = u_cullRangeMax.z - projPos.z; } gl_Position = outPos; h_depth = outPos.z/outPos.w; } 1 1 1 2023-01-10
Error in shader compilation: info: Fragment shader compilation failed. Internal compiler error: unexpected operator 001c2286:0100038e Tex WriteMask TClampST ReplaceBlend_6A:10_B:8_Eq:0 StenToAlpha StenUniform TFuncRepl #version 300 es // Driver: Adreno (TM) 305 - GLSL 300 #define DISCARD discard precision lowp float; precision highp int; #define splat3(x) vec3(x) #define mul(x, y) ((x) * (y)) // 001c2286:0100038e Tex WriteMask TClampST ReplaceBlend_6A:10_B:8_Eq:0 StenToAlpha StenUniform TFuncRepl precision highp int; uniform sampler2D tex; uniform sampler2D fbotex; uniform vec3 u_blendFixA; uniform vec4 u_texclamp; uniform uint u_colorWriteMask; uniform float u_stencilReplaceValue; in lowp vec4 v_color0; in mediump float v_fogdepth; in mediump vec3 v_texcoord; out vec4 fragColor0; uint packUnorm4x8R(vec4 v) { highp vec4 f = clamp(v, 0.0, 1.0); uvec4 u = uvec4(255.0 * f); return u.x | (u.y << 0x8u) | (u.z << 0x10u) | (u.w << 0x18u); } vec4 unpackUnorm4x8R(highp uint x) { highp uvec4 u = uvec4(x & 0xFFu, (x >> 0x8u) & 0xFFu, (x >> 0x10u) & 0xFFu, (x >> 0x18u) & 0xFFu); highp vec4 f = vec4(u); return f * (1.0 / 255.0); } void main() { lowp vec4 destColor = texelFetch(fbotex, ivec2(gl_FragCoord.x, gl_FragCoord.y), 0); vec2 fixedcoord = vec2(clamp(v_texcoord.x, u_texclamp.z, u_texclamp.x - u_texclamp.z), clamp(v_texcoord.y, u_texclamp.w, u_texclamp.y - u_texclamp.w)); vec4 t = texture(tex, fixedcoord.xy); vec4 p = v_color0; vec4 v = vec4(t.rgb, p.a); v.rgb = v.rgb * u_blendFixA + destColor.rgb * destColor.aaa * 2.0; fragColor0 = vec4(v.rgb, u_stencilReplaceValue); highp uint v32 = packUnorm4x8R(fragColor0); highp uint d32 = packUnorm4x8R(destColor); v32 = (v32 & u_colorWriteMask) | (d32 & ~u_colorWriteMask); fragColor0 = unpackUnorm4x8R(v32); } 1 1 1 2023-01-10
Error in shader compilation: info: 0:1: F0002: Mali-400 GP register allocation failed for vertex shader. Please contact [email protected] with the shader causing the problem, along with this error message. Mali online shader compiler r9p0-01rel0 [Revision 96995]. 03f04440:41400b31 HWX T N LM Tex Bones:6 Light: 0: c:0 t:0 1: c:0 t:1 2: c:0 t:1 3: c:0 t:1 WScale 1 Cull #version 100 // Driver: Mali-400 MP - GLSL 100 precision highp float; #define gl_VertexIndex gl_VertexID #define splat3(x) vec3(x) #define mul(x, y) ((x) * (y)) // 03f04440:41400b31 HWX T N LM Tex Bones:6 Light: 0: c:0 t:0 1: c:0 t:1 2: c:0 t:1 3: c:0 t:1 WScale 1 Cull attribute mediump vec4 w1; attribute mediump vec2 w2; attribute vec3 position; attribute mediump vec3 normal; attribute vec2 texcoord; uniform mat4 u_proj; uniform mat4 u_world; uniform mat4 u_view; uniform mat4 u_bone0; uniform mat4 u_bone1; uniform mat4 u_bone2; uniform mat4 u_bone3; uniform mat4 u_bone4; uniform mat4 u_bone5; uniform vec4 u_uvscaleoffset; uniform vec3 u_lightpos0; uniform lowp vec3 u_lightambient0; uniform lowp vec3 u_lightdiffuse0; uniform vec3 u_lightpos1; uniform mediump vec3 u_lightatt1; uniform lowp vec3 u_lightambient1; uniform lowp vec3 u_lightdiffuse1; uniform vec3 u_lightpos2; uniform mediump vec3 u_lightatt2; uniform lowp vec3 u_lightambient2; uniform lowp vec3 u_lightdiffuse2; uniform vec3 u_lightpos3; uniform mediump vec3 u_lightatt3; uniform lowp vec3 u_lightambient3; uniform lowp vec3 u_lightdiffuse3; uniform lowp vec4 u_ambient; uniform lowp vec3 u_matdiffuse; uniform lowp vec4 u_matspecular; uniform lowp vec3 u_matemissive; uniform lowp vec4 u_matambientalpha; uniform highp vec2 u_fogcoef; uniform highp vec4 u_depthRange; uniform highp vec4 u_cullRangeMin; uniform highp vec4 u_cullRangeMax; varying lowp vec4 v_color0; varying lowp vec3 v_color1; varying mediump vec3 v_texcoord; varying mediump float v_fogdepth; vec3 normalizeOr001(vec3 v) { return length(v) == 0.0 ? vec3(0.0, 0.0, 1.0) : normalize(v); } void main() { mat4 skinMatrix = mul(w1.x, u_bone0) + mul(w1.y, u_bone1) + mul(w1.z, u_bone2) + mul(w1.w, u_bone3) + mul(w2.x, u_bone4) + mul(w2.y, u_bone5); vec3 skinnedpos = mul(vec4(position, 1.0), skinMatrix).xyz * 1.9921875; vec3 worldpos = mul(vec4(skinnedpos, 1.0), u_world).xyz; mediump vec3 skinnednormal = mul(vec4(normal, 0.0), skinMatrix).xyz * 1.9921875; mediump vec3 worldnormal = normalizeOr001(mul(vec4(skinnednormal, 0.0), u_world).xyz); vec4 viewPos = vec4(mul(vec4(worldpos, 1.0), u_view).xyz, 1.0); vec4 outPos = mul(u_proj, viewPos); vec4 ambientColor = u_matambientalpha; vec3 diffuseColor = u_matdiffuse.rgb; vec3 specularColor = u_matspecular.rgb; lowp vec4 lightSum0 = u_ambient * ambientColor + vec4(u_matemissive, 0.0); vec3 toLight; lowp vec3 diffuse; float distance; lowp float lightScale; mediump float ldot; toLight = u_lightpos0; ldot = dot(toLight, worldnormal); diffuse = (u_lightdiffuse0 * diffuseColor) * max(ldot, 0.0); lightSum0.rgb += (u_lightambient0 * ambientColor.rgb + diffuse); toLight = u_lightpos1 - worldpos; distance = length(toLight); toLight /= distance; ldot = dot(toLight, worldnormal); lightScale = clamp(1.0 / dot(u_lightatt1, vec3(1.0, distance, distance*distance)), 0.0, 1.0); diffuse = (u_lightdiffuse1 * diffuseColor) * max(ldot, 0.0); lightSum0.rgb += (u_lightambient1 * ambientColor.rgb + diffuse) * lightScale; toLight = u_lightpos2 - worldpos; distance = length(toLight); toLight /= distance; ldot = dot(toLight, worldnormal); lightScale = clamp(1.0 / dot(u_lightatt2, vec3(1.0, distance, distance*distance)), 0.0, 1.0); diffuse = (u_lightdiffuse2 * diffuseColor) * max(ldot, 0.0); lightSum0.rgb += (u_lightambient2 * ambientColor.rgb + diffuse) * lightScale; toLight = u_lightpos3 - worldpos; distance = length(toLight); toLight /= distance; ldot = dot(toLight, worldnormal); lightScale = clamp(1.0 / dot(u_lightatt3, vec3(1.0, distance, distance*distance)), 0.0, 1.0); diffuse = (u_lightdiffuse3 * diffuse 1 1 1 2023-01-09
Error in shader compilation: info: 00000000:00000002 Tex TFuncMod #version 300 es #extension GL_ARM_shader_framebuffer_fetch : require precision lowp float; uniform sampler2D tex; in vec4 v_color0; in mediump vec3 v_texcoord; out vec4 fragColor0; void main() { vec4 t = texture(tex, v_texcoord.xy); vec4 p = v_color0; vec4 v = vec4(t.rgb * p.rgb, p.a); fragColor0 = v; } 1 1 1 2023-01-08
Error in shader compilation: info: 00000000:00000018 C Tex #version 300 es precision highp float; in vec4 position; in vec2 texcoord; in lowp vec4 color0; uniform mat4 u_proj; out lowp vec4 v_color0; out mediump vec3 v_texcoord; void main() { v_texcoord = vec3(texcoord, 1.0); v_color0 = color0; gl_Position = u_proj * vec4(position.xyz, 1.0); } 1 1 1 2023-01-08
Error in shader compilation: info: Vertex shader compilation failed. ERROR: 0:125: 'comp' : redefinition ERROR: 0:126: 'type' : redefinition ERROR: 0:174: 'comp' : redefinition ERROR: 0:175: 'type' : redefinition ERROR: 0:223: 'comp' : redefinition ERROR: 0:224: 'type' : redefinition ERROR: 6 compilation errors. No code generated. 01000000:80120b30 HWX T N Tex UVEnv Light: LightUberShader 0: c:0 t:0 1: c:0 t:0 Cull #version 300 es // Driver: Adreno (TM) 330 - GLSL 300 precision highp float; #define gl_VertexIndex gl_VertexID #define splat3(x) vec3(x) #define mul(x, y) ((x) * (y)) // 01000000:80120b30 HWX T N Tex UVEnv Light: LightUberShader 0: c:0 t:0 1: c:0 t:0 Cull in vec3 position; in mediump vec3 normal; in vec2 texcoord; uniform mat4 u_proj; uniform mat4 u_world; uniform mat4 u_view; uniform vec4 u_uvscaleoffset; uniform uint u_lightControl; uniform vec3 u_lightpos0; uniform mediump vec3 u_lightatt0; uniform mediump vec3 u_lightdir0; uniform mediump vec2 u_lightangle_spotCoef0; uniform lowp vec3 u_lightambient0; uniform lowp vec3 u_lightdiffuse0; uniform lowp vec3 u_lightspecular0; uniform vec3 u_lightpos1; uniform mediump vec3 u_lightatt1; uniform mediump vec3 u_lightdir1; uniform mediump vec2 u_lightangle_spotCoef1; uniform lowp vec3 u_lightambient1; uniform lowp vec3 u_lightdiffuse1; uniform lowp vec3 u_lightspecular1; uniform vec3 u_lightpos2; uniform mediump vec3 u_lightatt2; uniform mediump vec3 u_lightdir2; uniform mediump vec2 u_lightangle_spotCoef2; uniform lowp vec3 u_lightambient2; uniform lowp vec3 u_lightdiffuse2; uniform lowp vec3 u_lightspecular2; uniform vec3 u_lightpos3; uniform mediump vec3 u_lightatt3; uniform mediump vec3 u_lightdir3; uniform mediump vec2 u_lightangle_spotCoef3; uniform lowp vec3 u_lightambient3; uniform lowp vec3 u_lightdiffuse3; uniform lowp vec3 u_lightspecular3; uniform lowp vec4 u_ambient; uniform lowp vec3 u_matdiffuse; uniform lowp vec4 u_matspecular; uniform lowp vec3 u_matemissive; uniform lowp vec4 u_matambientalpha; uniform highp vec2 u_fogcoef; uniform highp vec4 u_depthRange; uniform highp vec4 u_cullRangeMin; uniform highp vec4 u_cullRangeMax; out lowp vec4 v_color0; out mediump vec3 v_texcoord; out mediump float v_fogdepth; vec3 normalizeOr001(vec3 v) { return length(v) == 0.0 ? vec3(0.0, 0.0, 1.0) : normalize(v); } void main() { vec3 worldpos = mul(vec4(position, 1.0), u_world).xyz; mediump vec3 worldnormal = normalizeOr001(mul(vec4(normal, 0.0), u_world).xyz); vec4 viewPos = vec4(mul(vec4(worldpos, 1.0), u_view).xyz, 1.0); vec4 outPos = mul(u_proj, viewPos); vec4 ambientColor = u_matambientalpha; vec3 diffuseColor = u_matdiffuse.rgb; vec3 specularColor = u_matspecular.rgb; lowp vec4 lightSum0 = u_ambient * ambientColor + vec4(u_matemissive, 0.0); lowp vec3 lightSum1 = splat3(0.0); vec3 toLight; lowp vec3 diffuse; float distance; lowp float lightScale; mediump float ldot; lowp float angle; if ((u_lightControl & 1u) != 0x0u) { uint comp = (u_lightControl >> 0x04u) & 0x3u; uint type = (u_lightControl >> 0x06u) & 0x3u; if (type == 0x0u) { toLight = u_lightpos0; } else { toLight = u_lightpos0 - worldpos; distance = length(toLight); toLight /= distance; } ldot = dot(toLight, worldnormal); if (comp == 0x2u) { if (u_matspecular.a <= 0.0) { ldot = 1.0; } else { ldot = pow(max(ldot, 0.0), u_matspecular.a); } } switch (int(type)) { case 1: lightScale = clamp(1.0 / dot(u_lightatt0, vec3(1.0, distance, distance*distance)), 0.0, 1.0); break; case 2: angle = length(u_lightdir0) == 0.0 ? 0.0 : dot(normalize(u_lightdir0), toLight); if (angle >= u_lightangle_spotCoef0.x) { lightScale = clamp(1.0 / dot(u_lightatt0, vec3(1.0, distance, distance*distance)), 0.0, 1.0) * (u_lightangle_spotCoef0.y <= 0.0 ? 1.0 : pow(angle, u_lightangle_spotCoef0.y)); } else { lightScale = 0.0; } break; default: lightScale = 1.0; break; } diffuse = (u_lightdiffuse0 * diffuseCol 1 1 1 2023-01-07
Error in shader compilation: info: Fragment shader compilation failed. Internal compiler error: unexpected operator 001c1a96:05800022 Tex TexAlpha 2x WriteMask ReplaceBlend_6A:10_B:6_Eq:2 StenToAlpha Sten0 TFuncMod #version 300 es // Driver: Adreno (TM) 330 - GLSL 300 #define DISCARD discard precision lowp float; precision highp int; #define splat3(x) vec3(x) #define mul(x, y) ((x) * (y)) // 001c1a96:05800022 Tex TexAlpha 2x WriteMask ReplaceBlend_6A:10_B:6_Eq:2 StenToAlpha Sten0 TFuncMod precision highp int; uniform sampler2D tex; uniform sampler2D fbotex; uniform vec3 u_blendFixA; uniform uint u_colorWriteMask; in lowp vec4 v_color0; in mediump float v_fogdepth; in mediump vec3 v_texcoord; out vec4 fragColor0; uint packUnorm4x8R(vec4 v) { highp vec4 f = clamp(v, 0.0, 1.0); uvec4 u = uvec4(255.0 * f); return u.x | (u.y << 0x8u) | (u.z << 0x10u) | (u.w << 0x18u); } vec4 unpackUnorm4x8R(highp uint x) { highp uvec4 u = uvec4(x & 0xFFu, (x >> 0x8u) & 0xFFu, (x >> 0x10u) & 0xFFu, (x >> 0x18u) & 0xFFu); highp vec4 f = vec4(u); return f * (1.0 / 255.0); } void main() { lowp vec4 destColor = texelFetch(fbotex, ivec2(gl_FragCoord.x, gl_FragCoord.y), 0); vec4 t = texture(tex, v_texcoord.xy); vec4 p = v_color0; vec4 v = p * t; v.rgb = clamp(v.rgb * 2.0, 0.0, 1.0); v.rgb = destColor.rgb * v.aaa * 2.0 - v.rgb * u_blendFixA; fragColor0 = vec4(v.rgb, 0.0); highp uint v32 = packUnorm4x8R(fragColor0); highp uint d32 = packUnorm4x8R(destColor); v32 = (v32 & u_colorWriteMask) | (d32 & ~u_colorWriteMask); fragColor0 = unpackUnorm4x8R(v32); } 1 1 1 2023-01-07
Error in shader compilation: info: ERROR: 0:54: 'assign' : l-value required "h_depth" (can't modify an attribute) ERROR: 0:55: 'assign' : l-value required "h_normal" (can't modify an attribute) ERROR: 2 compilation errors. No code generated. 00000000:00000938 HWX C T Tex Cull #version 320 es #extension GL_EXT_clip_cull_distance : enable // Adreno (TM) 540 - GLSL 320 precision highp float; #define gl_VertexIndex gl_VertexID #define splat3(x) vec3(x) #define mul(x, y) ((x) * (y)) in vec3 position; in vec2 texcoord; in lowp vec4 color0; uniform mat4 u_proj; uniform mat4 u_world; uniform mat4 u_view; uniform vec4 u_uvscaleoffset; uniform lowp vec4 u_matambientalpha; uniform highp vec4 u_depthRange; uniform highp vec4 u_cullRangeMin; uniform highp vec4 u_cullRangeMax; out lowp vec4 v_color0; out mediump vec3 v_texcoord; in float h_depth; in vec3 h_normal; vec3 normalizeOr001(vec3 v) { return length(v) == 0.0 ? vec3(0.0, 0.0, 1.0) : normalize(v); } void main() { vec3 worldpos = mul(vec4(position, 1.0), u_world).xyz; mediump vec3 worldnormal = vec3(0.0, 0.0, 1.0); vec4 viewPos = vec4(mul(vec4(worldpos, 1.0), u_view).xyz, 1.0); viewPos.xyz += vec3(10.000000, 0.000000, 0.000000)*viewPos.w; viewPos.xy *= 0.333333; vec4 outPos = mul(u_proj, viewPos); v_color0 = color0; v_texcoord = vec3(texcoord.xy * u_uvscaleoffset.xy, 0.0); v_color0.rgb = vec3(0.0); vec3 projPos = outPos.xyz / outPos.w; float projZ = (projPos.z - u_depthRange.z) * u_depthRange.w; if (u_cullRangeMin.w <= 0.0 || projZ * outPos.w > -outPos.w) { if (projPos.x < u_cullRangeMin.x || projPos.y < u_cullRangeMin.y || projPos.x > u_cullRangeMax.x || projPos.y > u_cullRangeMax.y) { outPos.xyzw = u_cullRangeMax.wwww; } } if (u_cullRangeMin.w <= 0.0) { if (projPos.z < u_cullRangeMin.z || projPos.z > u_cullRangeMax.z) { outPos.xyzw = u_cullRangeMax.wwww; } } gl_ClipDistance[0] = projZ * outPos.w + outPos.w; if (u_cullRangeMin.w > 0.0) { gl_CullDistance[0] = projPos.z - u_cullRangeMin.z; gl_CullDistance[1] = u_cullRangeMax.z - projPos.z; } gl_Position = outPos; h_depth = outPos.z/outPos.w; h_normal = vec3(-1.0); } 1 1 1 2023-01-07
Error in shader compilation: info: 0:71: L0001: Unknown character '�'(255) 0:71: L0001: Unknown character '�'(255) 0:71: L0001: Unknown character '�'(255) 0:71: L0001: Unknown character '�'(255) 0:71: L0002: Undeclared variable 'gl_F' 0:71: L0001: Expected token '}', found 'end of file' postshader #ifdef GL_ES precision mediump float; #endif // AA-Color shader, Modified to use in PPSSPP. Grabbed from: // http://forums.ngemu.com/showthread.php?t=76098 // by guest(r) ([email protected]) // license: GNU-GPL // Color variables #ifdef GL_ES precision mediump float; precision mediump int; #endif const vec3 c_ch = vec3(1.0,1.0,1.0); // rgb color channel intensity const float a = 1.20 ; // saturation const float b = 1.00 ; // brightness const float c = 1.25 ; // contrast // you can use contrast1,contrast2...contrast4 (or contrast0 for speedup) float contrast0(float x) { return x; } float contrast1(float x) { x = x*1.1547-1.0; return sign(x)*pow(abs(x),1.0/c)*0.86 + 0.86;} float contrast2(float x) { return normalize(vec2(pow(x,c),pow(0.86,c))).x*1.72;} float contrast3(float x) { return 1.73*pow(0.57735*x,c); } float contrast4(float x) { return clamp(0.866 + c*(x-0.866),0.05, 1.73); } uniform sampler2D sampler0; varying vec4 v_texcoord0; varying vec4 v_texcoord1; varying vec4 v_texcoord2; varying vec4 v_texcoord3; varying vec4 v_texcoord4; varying vec4 v_texcoord5; varying vec4 v_texcoord6; void main() { vec3 c10 = texture2D(sampler0, v_texcoord1.xy).xyz; vec3 c01 = texture2D(sampler0, v_texcoord4.xy).xyz; vec3 c11 = texture2D(sampler0, v_texcoord0.xy).xyz; vec3 c21 = texture2D(sampler0, v_texcoord5.xy).xyz; vec3 c12 = texture2D(sampler0, v_texcoord2.xy).xyz; vec3 dt = vec3(1.0,1.0,1.0); float k1=dot(abs(c01-c21),dt); float k2=dot(abs(c10-c12),dt); vec3 color = (k1*(c10+c12)+k2*(c01+c21)+0.001*c11)/(2.0*(k1+k2)+0.001); float x = sqrt(dot(color,color)); color.r = pow(color.r+0.001,a); color.g = pow(color.g+0.001,a); color.b = pow(color.b+0.001,a); gl_FragColor.rgb = contrast4(x)*normalize(color*c_ch)*b; gl_F���� 1 1 1 2023-01-07
Error in shader compilation: info: Fragment shader compilation failed. ERROR: 0:1: '<' : Syntax error: syntax error ERROR: 1 compilation errors. No code generated. thin3d Л,s 1 1 1 2023-01-05
Error in shader compilation: info: 0:1: F0002: Mali-400 GP register allocation failed for vertex shader. Please contact [email protected] with the shader causing the problem, along with this error message. Mali online shader compiler r8p0-00dev0 [Revision 96995]. 01f15555:00000b35 HWX T N LM Fog Tex Light: 0: c:1 t:1 1: c:1 t:1 2: c:1 t:1 3: c:1 t:1 MatUp:1 Cull #version 100 // Mali-400 MP - GLSL 100 precision highp float; #define gl_VertexIndex gl_VertexID #define splat3(x) vec3(x) #define mul(x, y) ((x) * (y)) attribute vec3 position; attribute mediump vec3 normal; attribute vec2 texcoord; uniform mat4 u_proj; uniform mat4 u_world; uniform mat4 u_view; uniform vec4 u_uvscaleoffset; uniform vec3 u_lightpos0; uniform mediump vec3 u_lightatt0; uniform lowp vec3 u_lightambient0; uniform lowp vec3 u_lightdiffuse0; uniform lowp vec3 u_lightspecular0; uniform vec3 u_lightpos1; uniform mediump vec3 u_lightatt1; uniform lowp vec3 u_lightambient1; uniform lowp vec3 u_lightdiffuse1; uniform lowp vec3 u_lightspecular1; uniform vec3 u_lightpos2; uniform mediump vec3 u_lightatt2; uniform lowp vec3 u_lightambient2; uniform lowp vec3 u_lightdiffuse2; uniform lowp vec3 u_lightspecular2; uniform vec3 u_lightpos3; uniform mediump vec3 u_lightatt3; uniform lowp vec3 u_lightambient3; uniform lowp vec3 u_lightdiffuse3; uniform lowp vec3 u_lightspecular3; uniform lowp vec4 u_ambient; uniform lowp vec3 u_matdiffuse; uniform lowp vec4 u_matspecular; uniform lowp vec3 u_matemissive; uniform lowp vec4 u_matambientalpha; uniform highp vec2 u_fogcoef; uniform highp vec4 u_depthRange; uniform highp vec4 u_cullRangeMin; uniform highp vec4 u_cullRangeMax; varying lowp vec4 v_color0; varying lowp vec3 v_color1; varying mediump vec3 v_texcoord; varying mediump float v_fogdepth; vec3 normalizeOr001(vec3 v) { return length(v) == 0.0 ? vec3(0.0, 0.0, 1.0) : normalize(v); } void main() { vec3 worldpos = mul(vec4(position, 1.0), u_world).xyz; mediump vec3 worldnormal = normalizeOr001(mul(vec4(normal, 0.0), u_world).xyz); vec4 viewPos = vec4(mul(vec4(worldpos, 1.0), u_view).xyz, 1.0); vec4 outPos = mul(u_proj, viewPos); lowp vec4 lightSum0 = u_ambient * u_matambientalpha + vec4(u_matemissive, 0.0); lowp vec3 lightSum1 = splat3(0.0); vec3 toLight; lowp vec3 diffuse; float distance; lowp float lightScale; mediump float ldot; toLight = u_lightpos0 - worldpos; distance = length(toLight); toLight /= distance; ldot = dot(toLight, worldnormal); lightScale = clamp(1.0 / dot(u_lightatt0, vec3(1.0, distance, distance*distance)), 0.0, 1.0); diffuse = (u_lightdiffuse0 * u_matdiffuse) * max(ldot, 0.0); if (ldot >= 0.0) { ldot = dot(normalize(toLight + vec3(0.0, 0.0, 1.0)), worldnormal); if (u_matspecular.a <= 0.0) { ldot = 1.0; } else { ldot = pow(max(ldot, 0.0), u_matspecular.a); } if (ldot > 0.0) lightSum1 += u_lightspecular0 * u_matspecular.rgb * ldot * lightScale; } lightSum0.rgb += (u_lightambient0 * u_matambientalpha.rgb + diffuse) * lightScale; toLight = u_lightpos1 - worldpos; distance = length(toLight); toLight /= distance; ldot = dot(toLight, worldnormal); lightScale = clamp(1.0 / dot(u_lightatt1, vec3(1.0, distance, distance*distance)), 0.0, 1.0); diffuse = (u_lightdiffuse1 * u_matdiffuse) * max(ldot, 0.0); if (ldot >= 0.0) { ldot = dot(normalize(toLight + vec3(0.0, 0.0, 1.0)), worldnormal); if (u_matspecular.a <= 0.0) { ldot = 1.0; } else { ldot = pow(max(ldot, 0.0), u_matspecular.a); } if (ldot > 0.0) lightSum1 += u_lightspecular1 * u_matspecular.rgb * ldot * lightScale; } lightSum0.rgb += (u_lightambient1 * u_matambientalpha.rgb + diffuse) * lightScale; toLight = u_lightpos2 - worldpos; distance = length(toLight); toLight /= distance; ldot = dot(toLight, worldnormal); lightScale = clamp(1.0 / dot(u_lightatt2, vec3(1.0, distance, distance*distance)), 0.0, 1.0); diffuse = (u_lightdiffuse2 * u_matdiffuse) * max(ldot, 0.0); if (ldot >= 0.0) { ldot = dot(normalize(to 1 1 1 2023-01-04
Error in shader compilation: info: 0:1: L0001: Unknown character '@'(64) 0:1: L0001: Unknown character '"'(34) 0:1: L0001: Unknown character '�'(229) 0:1: L0001: Unknown character ''(127) 0:1: L0001: Typename expected, found 'p' 0:1: L0001: Unknown character '"'(34) 0:1: L0001: Unknown character '�'(229) 0:1: L0001: Unknown character ''(127) 0:2: L0001: Expected token ';', found 'precision' thin3d @"�p"�L_ES precision mediump float; #endif #ifdef GL_ES precision lowp float; #endif #if __VERSION__ >= 130 #define varying in #define gl_FragColor fragColor0 out vec4 fragColor0; #endif varying vec4 oColor0; void main() { gl_FragColor = oColor0; } 1 1 1 2023-01-03
Error in shader compilation: info: Compile failed. 00000000:0001d022 Tex TexAlpha TFuncMod AlphaTest0 > #version 130 // Intel(R) Graphics Media Accelerator 3600 Series - GLSL 130 #define DISCARD discard #define lowp #define mediump #define highp #define splat3(x) vec3(x) #define mul(x, y) ((x) * (y)) uniform sampler2D tex; uniform sampler2D testtex; in lowp vec4 v_color0; in mediump vec3 v_texcoord; out vec4 fragColor0; void main() { vec4 t = texture(tex, v_texcoord.xy); vec4 p = v_color0; vec4 v = p * t; if (v.a < 0.002) DISCARD; fragColor0 = v; } 1 1 1 2023-01-03
Error in shader compilation: info: Vertex shader compilation failed. ERROR: 0:1: '8' : Syntax error: syntax error ERROR: 1 compilation errors. No code generated. thin3d 8�z���� 300 es #if __VERSION__ >= 130 #define attribute in #define varying out #endif attribute vec3 Position; attribute vec4 Color0; attribute vec2 TexCoord0; varying vec4 oColor0; varying vec2 oTexCoord0; uniform mat4 WorldViewProj; void main() { gl_Position = WorldViewProj * vec4(Position, 1.0); oColor0 = Color0; oTexCoord0 = TexCoord0; } 1 1 1 2023-01-02
Error in shader compilation: info: (unknown reason) thin3d #version 320 es #if __VERSION__ >= 130 #define attribute in #define varying out #endif attribute vec3 Position; attribute vec4 Color0; varying vec4 oColor0; uniform mat4 WorldViewProj; void main() { gl_Position = WorldViewProj * vec4(Position, 1.0); oColor0 = Color0; } 1 1 1 2022-12-31
Error in shader compilation: info: Vertex shader compilation failed. ERROR: 0:1: '<' : Syntax error: syntax error ERROR: 1 compilation errors. No code generated. thin3d ����� 300 es #if __VERSION__ >= 130 #define attribute in #define varying out #endif attribute vec3 Position; attribute vec4 Color0; varying vec4 oColor0; uniform mat4 WorldViewProj; void main() { gl_Position = WorldViewProj * vec4(Position, 1.0); oColor0 = Color0; } 1 1 1 2022-12-29
Error in shader compilation: info: Vertex shader compilation failed. ERROR: 0:1: '<' : Syntax error: syntax error ERROR: 1 compilation errors. No code generated. thin3d ����� 300 es #if __VERSION__ >= 130 #define attribute in #define varying out #endif attribute vec3 Position; attribute vec4 Color0; attribute vec2 TexCoord0; varying vec4 oColor0; varying vec2 oTexCoord0; uniform mat4 WorldViewProj; void main() { gl_Position = WorldViewProj * vec4(Position, 1.0); oColor0 = Color0; oTexCoord0 = TexCoord0; } 1 1 1 2022-12-29
Error in shader compilation: info: Vertex shader compilation failed. ERROR: 0:1: '<' : Syntax error: syntax error ERROR: 1 compilation errors. No code generated. thin3d ��� 300 es #if __VERSION__ >= 130 #define attribute in #define varying out #endif attribute vec3 Position; attribute vec4 Color0; varying vec4 oColor0; uniform mat4 WorldViewProj; void main() { gl_Position = WorldViewProj * vec4(Position, 1.0); oColor0 = Color0; } 1 1 1 2022-12-24
Error in shader compilation: info: Fragment shader compilation failed. ERROR: 0:1: '<' : Syntax error: syntax error ERROR: 1 compilation errors. No code generated. thin3d �F_� 1 1 1 2022-12-20
Error in shader compilation: info: Vertex shader compilation failed. ERROR: 0:1: '<' : Syntax error: syntax error ERROR: 1 compilation errors. No code generated. thin3d ȱd�H�g� 300 es #if __VERSION__ >= 130 #define attribute in #define varying out #endif attribute vec3 Position; attribute vec4 Color0; varying vec4 oColor0; uniform mat4 WorldViewProj; void main() { gl_Position = WorldViewProj * vec4(Position, 1.0); oColor0 = Color0; } 1 1 1 2022-12-18
Error in shader compilation: info: Fragment shader compilation failed. ERROR: 0:1: '<' : Syntax error: syntax error ERROR: 1 compilation errors. No code generated. thin3d p���p�q� 300 es #ifdef GL_ES precision mediump float; #endif #ifdef GL_ES precision lowp float; #endif #if __VERSION__ >= 130 #define varying in #define gl_FragColor fragColor0 out vec4 fragColor0; #endif varying vec4 oColor0; void main() { gl_FragColor = oColor0; } 1 1 1 2022-12-15
Error in shader compilation: info: Compile failed. ERROR: 0:3:5 '' is an invalid character. ERROR: 0:3: 'preci' : syntax error ERROR: main() function is missing. WARNING: 0:3:5 '' is an invalid character. 1 compilation warnings. 3 compilation errors. No code generated. 40000000:00000124 HWX Fog Flat Cull #version 320 es // PowerVR Rogue GE8320 - GLSL 320 preci 1 1 1 2022-12-15
Error in shader compilation: info: Compile failed. ERROR: 0:16:46 '�' is an invalid character. ERROR: 0:16:47 '' is an invalid character. ERROR: 0:16:49 '�' is an invalid character. ERROR: 0:16:52 '�' is an invalid character. ERROR: 0:16: 'q' : undeclared identifier ERROR: 0:16: 'K' : syntax error WARNING: 0:16:46 '�' is an invalid character. WARNING: 0:16:47 '' is an invalid character. WARNING: 0:16:49 '�' is an invalid character. WARNING: 0:16:52 '�' is an invalid character. 4 compilation warnings. 6 compilation errors. No code generated. 00000000:00200000 Fog #version 320 es #extension GL_EXT_shader_framebuffer_fetch : require // PowerVR Rogue GE8322 - GLSL 320 #define DISCARD discard precision lowp float; precision highp int; #define splat3(x) vec3(x) #define mul(x, y) ((x) * (y)) in lowp vec4 v_color0; uniform vec3 u_fogcolor; in highp float v_fogdepth; out vec4 fragColor0; void main() { vec4 v = v_color0 ; float fogCoef = clamp(v_fogdepth, 0.0, 1.0); v = mix(vec4(u_fogcolor, v.a), v, fogCoef);q�K� 9� 1 1 1 2022-12-08
Error in shader compilation: info: Compile failed. ERROR: Unexpected end of source found 1 compilation errors. No code generated. 00000000:0001d002 Tex TFuncMod AlphaTest0 > 1 1 1 2022-12-08
Error in shader compilation: info: 00004000:00000000 Flat #version 300 es precision lowp float; flat in vec4 v_color0; out vec4 fragColor0; void main() { vec4 v = v_color0 ; fragColor0 = v; } 1 1 1 2022-11-26
Error in shader compilation: info: 00000000:00000012 THR Tex #version 300 es precision highp float; in vec4 position; in vec2 texcoord; in lowp vec4 color0; uniform mat4 u_proj_through; out lowp vec4 v_color0; out highp vec3 v_texcoord; void main() { v_texcoord = vec3(texcoord, 1.0); v_color0 = color0; gl_Position = u_proj_through * vec4(position.xyz, 1.0); } 1 1 1 2022-11-26
Error in shader compilation: info: Compile failed. 00000000:0021d022 Tex TexAlpha Fog TFuncMod AlphaTest0 > #version 320 es #extension GL_EXT_shader_framebuffer_fetch : require // PowerVR Rogue GE8320 - GLSL 320 #define DISCARD discard precision lowp float; precision highp int; #define splat3(x) vec3(x) #define mul(x, y) ((x) * (y)) uniform sampler2D tex; uniform sampler2D testtex; in lowp vec4 v_color0; uniform vec3 u_fogcolor; in highp float v_fogdepth; in highp vec3 v_texcoord; out vec4 fragColor0; void main() { vec4 t = texture(tex, v_texcoord.xy); vec4 p = v_color0; vec4 v = p * t; float fogCoef = clamp(v_fogdepth, 0.0, 1.0); v = mix(vec4(u_fogcolor, v.a), v, fogCoef); if (v.a < 0.002) DISCARD; fragColor0 = v; } 1 1 1 2022-11-23
Error in shader compilation: info: Compile failed. 00000000:00200002 Tex Fog TFuncMod #version 320 es #extension GL_EXT_shader_framebuffer_fetch : require // PowerVR Rogue GE8320 - GLSL 320 #define DISCARD discard precision lowp float; precision highp int; #define splat3(x) vec3(x) #define mul(x, y) ((x) * (y)) uniform sampler2D tex; in lowp vec4 v_color0; uniform vec3 u_fogcolor; in highp float v_fogdepth; in highp vec3 v_texcoord; out vec4 fragColor0; void main() { vec4 t = texture(tex, v_texcoord.xy); vec4 p = v_color0; vec4 v = vec4(t.rgb * p.rgb, p.a); float fogCoef = clamp(v_fogdepth, 0.0, 1.0); v = mix(vec4(u_fogcolor, v.a), v, fogCoef); fragColor0 = v; } 1 1 1 2022-11-23
Error in shader compilation: info: Compile failed. 01770000:00000b34 HWX T N Fog Tex Light: 0: c:0 t:0 1: c:0 t:0 2: c:0 t:0 MatUp:7 Cull #version 320 es // PowerVR Rogue GE8320 - GLSL 320 precision highp float; #define gl_VertexIndex gl_VertexID #define splat3(x) vec3(x) #define mul(x, y) ((x) * (y)) in vec3 position; in mediump vec3 normal; in vec2 texcoord; uniform mat4 u_proj; uniform mat4 u_world; uniform mat4 u_view; uniform vec4 u_uvscaleoffset; uniform vec3 u_lightpos0; uniform lowp vec3 u_lightambient0; uniform lowp vec3 u_lightdiffuse0; uniform vec3 u_lightpos1; uniform lowp vec3 u_lightambient1; uniform lowp vec3 u_lightdiffuse1; uniform vec3 u_lightpos2; uniform lowp vec3 u_lightambient2; uniform lowp vec3 u_lightdiffuse2; uniform lowp vec4 u_ambient; uniform lowp vec3 u_matdiffuse; uniform lowp vec4 u_matspecular; uniform lowp vec3 u_matemissive; uniform lowp vec4 u_matambientalpha; uniform highp vec2 u_fogcoef; uniform highp vec4 u_depthRange; uniform highp vec4 u_cullRangeMin; uniform highp vec4 u_cullRangeMax; out lowp vec4 v_color0; out mediump vec3 v_texcoord; out mediump float v_fogdepth; vec3 normalizeOr001(vec3 v) { return length(v) == 0.0 ? vec3(0.0, 0.0, 1.0) : normalize(v); } void main() { vec3 worldpos = mul(vec4(position, 1.0), u_world).xyz; mediump vec3 worldnormal = normalizeOr001(mul(vec4(normal, 0.0), u_world).xyz); vec4 viewPos = vec4(mul(vec4(worldpos, 1.0), u_view).xyz, 1.0); vec4 outPos = mul(u_proj, viewPos); lowp vec4 lightSum0 = u_ambient * u_matambientalpha + vec4(u_matemissive, 0.0); vec3 toLight; lowp vec3 diffuse; mediump float ldot; toLight = u_lightpos0; ldot = dot(toLight, worldnormal); diffuse = (u_lightdiffuse0 * u_matdiffuse) * max(ldot, 0.0); lightSum0.rgb += (u_lightambient0 * u_matambientalpha.rgb + diffuse); toLight = u_lightpos1; ldot = dot(toLight, worldnormal); diffuse = (u_lightdiffuse1 * u_matdiffuse) * max(ldot, 0.0); lightSum0.rgb += (u_lightambient1 * u_matambientalpha.rgb + diffuse); toLight = u_lightpos2; ldot = dot(toLight, worldnormal); diffuse = (u_lightdiffuse2 * u_matdiffuse) * max(ldot, 0.0); lightSum0.rgb += (u_lightambient2 * u_matambientalpha.rgb + diffuse); v_color0 = clamp(lightSum0, 0.0, 1.0); v_texcoord = vec3(texcoord.xy * u_uvscaleoffset.xy, 0.0); v_fogdepth = (viewPos.z + u_fogcoef.x) * u_fogcoef.y; vec3 projPos = outPos.xyz / outPos.w; float projZ = (projPos.z - u_depthRange.z) * u_depthRange.w; if (u_cullRangeMin.w <= 0.0 || projZ * outPos.w > -outPos.w) { if (projPos.x < u_cullRangeMin.x || projPos.y < u_cullRangeMin.y || projPos.x > u_cullRangeMax.x || projPos.y > u_cullRangeMax.y) { outPos.xyzw = u_cullRangeMax.wwww; } } if (u_cullRangeMin.w <= 0.0) { if (projPos.z < u_cullRangeMin.z || projPos.z > u_cullRangeMax.z) { outPos.xyzw = u_cullRangeMax.wwww; } } gl_Position = outPos; } 1 1 1 2022-11-23
Error in shader compilation: info: 0:1: L0001: Typename expected, found '}' thin3d }�~�}�~L_ES precision mediump float; #endif #ifdef GL_ES precision lowp float; #endif #if __VERSION__ >= 130 #define varying in #define gl_FragColor fragColor0 out vec4 fragColor0; #endif varying vec4 oColor0; void main() { gl_FragColor = oColor0; } 1 1 1 2022-11-23
Error in shader compilation: info: (unknown reason) 00000000:00000001 Clear #version 300 es #extension GL_EXT_shader_framebuffer_fetch : require precision lowp float; in vec4 v_color0; inout vec4 fragColor0; void main() { vec4 v = v_color0; fragColor0 = v; } 1 1 1 2022-11-23
Error in shader compilation: info: (unknown reason) 00000000:0000d000 AlphaTest > #version 300 es #extension GL_EXT_shader_framebuffer_fetch : require precision lowp float; uniform sampler2D testtex; in vec4 v_color0; inout vec4 fragColor0; void main() { vec4 v = v_color0 ; float aResult = texture(testtex, vec2(v.a * 0.996094 + 0.001953, 0)).a; if (aResult < 0.5) discard; fragColor0 = v; } 1 1 1 2022-11-23
Error in shader compilation: info: (unknown reason) 00002a82:0000d022 Tex TexAlpha ReplaceBlend_2A:10_B:10_Eq:0 TFuncMod AlphaTest > #version 300 es #extension GL_EXT_shader_framebuffer_fetch : require precision lowp float; uniform sampler2D tex; uniform vec3 u_blendFixA; uniform vec3 u_blendFixB; uniform sampler2D testtex; in vec4 v_color0; in mediump vec3 v_texcoord; inout vec4 fragColor0; void main() { vec4 t = texture(tex, v_texcoord.xy); vec4 p = v_color0; vec4 v = p * t; float aResult = texture(testtex, vec2(v.a * 0.996094 + 0.001953, 0)).a; if (aResult < 0.5) discard; v.rgb = v.rgb * u_blendFixA; fragColor0 = v; } 1 1 1 2022-11-23
Error in shader compilation: info: (unknown reason) 00002a82:0000d000 ReplaceBlend_2A:10_B:10_Eq:0 AlphaTest > #version 300 es #extension GL_EXT_shader_framebuffer_fetch : require precision lowp float; uniform vec3 u_blendFixA; uniform vec3 u_blendFixB; uniform sampler2D testtex; in vec4 v_color0; inout vec4 fragColor0; void main() { vec4 v = v_color0 ; float aResult = texture(testtex, vec2(v.a * 0.996094 + 0.001953, 0)).a; if (aResult < 0.5) discard; v.rgb = v.rgb * u_blendFixA; fragColor0 = v; } 1 1 1 2022-11-23
Error in shader compilation: info: (unknown reason) 00000000:0000d022 Tex TexAlpha TFuncMod AlphaTest > #version 300 es #extension GL_EXT_shader_framebuffer_fetch : require precision lowp float; uniform sampler2D tex; uniform sampler2D testtex; in vec4 v_color0; in mediump vec3 v_texcoord; inout vec4 fragColor0; void main() { vec4 t = texture(tex, v_texcoord.xy); vec4 p = v_color0; vec4 v = p * t; float aResult = texture(testtex, vec2(v.a * 0.996094 + 0.001953, 0)).a; if (aResult < 0.5) discard; fragColor0 = v; } 1 1 1 2022-11-23
Error in shader compilation: info: 00000000:0001d002 Tex TFuncMod AlphaTest0 > #version 300 es #extension GL_ARM_shader_framebuffer_fetch : require precision lowp float; uniform sampler2D tex; uniform sampler2D testtex; in vec4 v_color0; in mediump vec3 v_texcoord; out vec4 fragColor0; void main() { vec4 t = texture(tex, v_texcoord.xy); vec4 p = v_color0; vec4 v = vec4(t.rgb * p.rgb, p.a); if (v.a < 0.002) discard; fragColor0 = v; } 1 1 1 2022-11-21
Error in shader compilation: info: Vertex shader compilation failed. ERROR: 0:179: 'outerProduct' : no matching overloaded function found ERROR: 0:179: '=' : cannot convert from 'const float' to '4X4 matrix of float' ERROR: 2 compilation errors. No code generated. 00080000:00007b18 HWX C T N Tex Spline TessC TessT TessRevN #version 300 es // Adreno (TM) 306 - GLSL 300 precision highp float; #define gl_VertexIndex gl_VertexID #define splat3(x) vec3(x) #define mul(x, y) ((x) * (y)) in vec3 position; in mediump vec3 normal; in vec2 texcoord; in lowp vec4 color0; uniform mat4 u_proj; uniform mat4 u_world; uniform mat4 u_view; uniform vec4 u_uvscaleoffset; uniform lowp vec4 u_matambientalpha; uniform highp vec4 u_depthRange; uniform highp vec4 u_cullRangeMin; uniform highp vec4 u_cullRangeMax; out lowp vec4 v_color0; out mediump vec3 v_texcoord; uniform sampler2D u_tess_points; uniform sampler2D u_tess_weights_u; uniform sampler2D u_tess_weights_v; uniform int u_spline_counts; vec2 tess_sample(in vec2 points[16], mat4 weights) { vec2 pos = vec2(0.0, 0.0); pos += weights[0][0] * points[0]; pos += weights[0][1] * points[1]; pos += weights[0][2] * points[2]; pos += weights[0][3] * points[3]; pos += weights[1][0] * points[4]; pos += weights[1][1] * points[5]; pos += weights[1][2] * points[6]; pos += weights[1][3] * points[7]; pos += weights[2][0] * points[8]; pos += weights[2][1] * points[9]; pos += weights[2][2] * points[10]; pos += weights[2][3] * points[11]; pos += weights[3][0] * points[12]; pos += weights[3][1] * points[13]; pos += weights[3][2] * points[14]; pos += weights[3][3] * points[15]; return pos; } vec3 tess_sample(in vec3 points[16], mat4 weights) { vec3 pos = vec3(0.0, 0.0, 0.0); pos += weights[0][0] * points[0]; pos += weights[0][1] * points[1]; pos += weights[0][2] * points[2]; pos += weights[0][3] * points[3]; pos += weights[1][0] * points[4]; pos += weights[1][1] * points[5]; pos += weights[1][2] * points[6]; pos += weights[1][3] * points[7]; pos += weights[2][0] * points[8]; pos += weights[2][1] * points[9]; pos += weights[2][2] * points[10]; pos += weights[2][3] * points[11]; pos += weights[3][0] * points[12]; pos += weights[3][1] * points[13]; pos += weights[3][2] * points[14]; pos += weights[3][3] * points[15]; return pos; } vec4 tess_sample(in vec4 points[16], mat4 weights) { vec4 pos = vec4(0.0, 0.0, 0.0, 0.0); pos += weights[0][0] * points[0]; pos += weights[0][1] * points[1]; pos += weights[0][2] * points[2]; pos += weights[0][3] * points[3]; pos += weights[1][0] * points[4]; pos += weights[1][1] * points[5]; pos += weights[1][2] * points[6]; pos += weights[1][3] * points[7]; pos += weights[2][0] * points[8]; pos += weights[2][1] * points[9]; pos += weights[2][2] * points[10]; pos += weights[2][3] * points[11]; pos += weights[3][0] * points[12]; pos += weights[3][1] * points[13]; pos += weights[3][2] * points[14]; pos += weights[3][3] * points[15]; return pos; } struct Tess { vec3 pos; vec2 tex; vec4 col; }; void tessellate(out Tess tess) { ivec2 point_pos = ivec2(position.z, normal.z); ivec2 weight_idx = ivec2(position.xy); vec3 _pos[16]; vec2 _tex[16]; vec4 _col[16]; int index_u, index_v; index_u = (0 + point_pos.x); index_v = (0 + point_pos.y); _pos[0] = texelFetch(u_tess_points, ivec2(index_u, index_v), 0).xyz; _tex[0] = texelFetch(u_tess_points, ivec2(index_u + u_spline_counts, index_v), 0).xy; _col[0] = texelFetch(u_tess_points, ivec2(index_u + u_spline_counts * 2, index_v), 0).rgba; index_u = (1 + point_pos.x); index_v = (0 + point_pos.y); _pos[1] = texelFetch(u_tess_points, ivec2(index_u, index_v), 0).xyz; _tex[1] = texelFetch(u_tess_points, ivec2(index_u + u_spline_counts, index_v), 0).xy; _col[1] = texelFetch(u_tess_points, ivec2(index_u + u_spline_counts * 2, index_v), 0).rgba; index_u = (2 + point_pos.x); index_v = (0 + point_pos.y); _pos[2] = texelFetch(u_tess_points, ivec2(index_u, index_v), 0).xyz; _tex[2] = texelFetch(u_tess_poin 1 1 1 2022-11-11
Error in shader compilation: info: Vertex shader compilation failed. ERROR: 0:3: 'premature EOF' : Syntax error: syntax error ERROR: 1 compilation errors. No code generated. 00000000:0000000a THR C #version 300 es // Adreno (TM) 405 - GLSL 300 precision 1 1 1 2022-11-07
Error in shader compilation: info: Compile failed. 01f31591:00000915 HWX T LM Fog Tex Light: 0: c:1 t:0 1: c:1 t:2 2: c:1 t:1 3: c:1 t:0 MatUp:3 #version 100 precision highp float; attribute vec3 position; attribute vec2 texcoord; uniform mat4 u_proj; uniform mat4 u_world; uniform mat4 u_view; uniform vec4 u_uvscaleoffset; uniform vec3 u_lightpos0; uniform lowp vec3 u_lightambient0; uniform lowp vec3 u_lightdiffuse0; uniform lowp vec3 u_lightspecular0; uniform vec3 u_lightpos1; uniform mediump vec3 u_lightatt1; uniform mediump vec3 u_lightdir1; uniform mediump vec2 u_lightangle_spotCoef1; uniform lowp vec3 u_lightambient1; uniform lowp vec3 u_lightdiffuse1; uniform lowp vec3 u_lightspecular1; uniform vec3 u_lightpos2; uniform mediump vec3 u_lightatt2; uniform lowp vec3 u_lightambient2; uniform lowp vec3 u_lightdiffuse2; uniform lowp vec3 u_lightspecular2; uniform vec3 u_lightpos3; uniform lowp vec3 u_lightambient3; uniform lowp vec3 u_lightdiffuse3; uniform lowp vec3 u_lightspecular3; uniform lowp vec4 u_ambient; uniform lowp vec3 u_matdiffuse; uniform lowp vec4 u_matspecular; uniform lowp vec3 u_matemissive; uniform lowp vec4 u_matambientalpha; uniform highp vec2 u_fogcoef; uniform highp vec4 u_cullRangeMin; uniform highp vec4 u_cullRangeMax; varying lowp vec4 v_color0; varying lowp vec3 v_color1; varying highp vec3 v_texcoord; varying highp float v_fogdepth; void main() { vec3 worldpos = (u_world * vec4(position.xyz, 1.0)).xyz; mediump vec3 worldnormal = vec3(0.0, 0.0, 1.0); vec4 viewPos = u_view * vec4(worldpos, 1.0); vec4 outPos = u_proj * viewPos; lowp vec4 lightSum0 = u_ambient * u_matambientalpha + vec4(u_matemissive, 0.0); lowp vec3 lightSum1 = vec3(0.0); vec3 toLight; lowp vec3 diffuse; float distance; lowp float lightScale; mediump float ldot; lowp float angle; toLight = u_lightpos0; ldot = dot(toLight, worldnormal); diffuse = (u_lightdiffuse0 * u_matdiffuse) * max(ldot, 0.0); if (ldot >= 0.0) { ldot = dot(normalize(toLight + vec3(0.0, 0.0, 1.0)), worldnormal); if (u_matspecular.a == 0.0) { ldot = 1.0; } else { ldot = pow(max(ldot, 0.0), u_matspecular.a); } if (ldot > 0.0) lightSum1 += u_lightspecular0 * u_matspecular.rgb * ldot ; } lightSum0.rgb += (u_lightambient0 * u_matambientalpha.rgb + diffuse); toLight = u_lightpos1 - worldpos; distance = length(toLight); toLight /= distance; ldot = dot(toLight, worldnormal); angle = length(u_lightdir1) == 0.0 ? 0.0 : dot(normalize(u_lightdir1), toLight); if (angle >= u_lightangle_spotCoef1.x) { lightScale = clamp(1.0 / dot(u_lightatt1, vec3(1.0, distance, distance*distance)), 0.0, 1.0) * (u_lightangle_spotCoef1.y == 0.0 ? 1.0 : pow(angle, u_lightangle_spotCoef1.y)); } else { lightScale = 0.0; } diffuse = (u_lightdiffuse1 * u_matdiffuse) * max(ldot, 0.0); if (ldot >= 0.0) { ldot = dot(normalize(toLight + vec3(0.0, 0.0, 1.0)), worldnormal); if (u_matspecular.a == 0.0) { ldot = 1.0; } else { ldot = pow(max(ldot, 0.0), u_matspecular.a); } if (ldot > 0.0) lightSum1 += u_lightspecular1 * u_matspecular.rgb * ldot * lightScale; } lightSum0.rgb += (u_lightambient1 * u_matambientalpha.rgb + diffuse) * lightScale; toLight = u_lightpos2 - worldpos; distance = length(toLight); toLight /= distance; ldot = dot(toLight, worldnormal); lightScale = clamp(1.0 / dot(u_lightatt2, vec3(1.0, distance, distance*distance)), 0.0, 1.0); diffuse = (u_lightdiffuse2 * u_matdiffuse) * max(ldot, 0.0); if (ldot >= 0.0) { ldot = dot(normalize(toLight + vec3(0.0, 0.0, 1.0)), worldnormal); if (u_matspecular.a == 0.0) { ldot = 1.0; } else { ldot = pow(max(ldot, 0.0), u_matspecular.a); } if (ldot > 0.0) lightSum1 += u_lightspecular2 * u_matspecular.rgb * ldot * lightScale; } lightSum0.rgb += (u_lightambient2 * u_matambientalpha.rgb + diffuse) * lightScale; toLight = u_lightpos3; ldot = dot(toLight, worldnormal); diffuse = (u_lightdiffuse3 * u_matdiffuse) * max(ldot, 0.0); if (ldot >= 0.0) { ldot 1 1 1 2022-11-06
Error in shader compilation: info: ERROR: 0:1: '(' : Syntax error: syntax error INTERNAL ERROR: no main() function! ERROR: 1 compilation errors. No code generated. thin3d p(Wx 1 1 1 2022-11-05
Error in shader compilation: info: 0:2: L0001: Unknown character ''(2) 0:2: P0001: Unexpected text found after #extension directive 0:2: L0001: Unknown character '�'(139) 0:2: L0001: Unknown character '�'(176) 00000000:00000001 Clear #version 320 es #extension GL_ARM_shader_framebuffer_fetch : require\����� 1 1 1 2022-11-01
Error in shader compilation: info: Compile failed. ERROR: 0:40: '0.0' : syntax error; ERROR: 1 compilation errors. No code generated. WARNING: 0:35: 'function_call_constructor@vec4_vec4@12' : used without being initialised WARNING: 1 compilation warnings. 01170001:00000b34 HWX T N Fog Tex Light: 0: c:1 t:0 MatUp:7 Cull #version 130 // Intel(R) Graphics Media Accelerator 3600 Series - GLSL 130 #define gl_VertexIndex gl_VertexID #define lowp #define mediump #define highp #define splat3(x) vec3(x) #define mul(x, y) ((x) * (y)) in vec3 position; in mediump vec3 normal; in vec2 texcoord; uniform mat4 u_proj; uniform mat4 u_world; uniform mat4 u_view; uniform vec4 u_uvscaleoffset; uniform vec3 u_lightpos0; uniform lowp vec3 u_lightambient0; uniform lowp vec3 u_lightdiffuse0; uniform lowp vec3 u_lightspecular0; uniform lowp vec4 u_ambient; uniform lowp vec3 u_matdiffuse; uniform lowp vec4 u_matspecular; uniform lowp vec3 u_matemissive; uniform lowp vec4 u_matambientalpha; uniform highp vec2 u_fogcoef; uniform highp vec4 u_cullRangeMin; uniform highp vec4 u_cullRangeMax; out lowp vec4 v_color0; out mediump vec3 v_texcoord; out mediump float v_fogdepth; vec3 normalizeOr001(vec3 v) { return length(v) == 0.0 ? vec3(0.0, 0.0, 1.0) : normalize(v); } void main() { vec3 worldpos = mul(vec4(position, 1.0), u_world).xyz; mediump vec3 worldnormal = normalizeOr001(mul(vec4(normal, 0.0), u_world).xyz); vec4 viewPos = vec4(mul(vec4(worldpos, 1.0), u_view).xyz, 1.0); vec4 outPos = mul(u_proj, viewPos); lowp vec4 lightSum0 = u_ambient * u_matambientalpha + vec4(u_matemissive, 0.0); lowp vec3 lightSum1 = splat3(0.0); vec3 toLight; lowp vec3 diffuse; mediump float ldot; toLight = u_lightpos0; ldot = dot(toLight, worldnormal); diffuse = (u_lightdiffuse0 * u_matdiffuse) * max(ldot, 0.0); if (ldot >= 0.0) { ldot = dot(normalize(toLight + vec3(0.0, 0.0, 1.0)), worldnormal); if (u_matspecular.a <= 0.0) { ldot = 1.0; } else { ldot = pow(max(ldot, 0.0), u_matspecular.a); } if (ldot > 0.0) lightSum1 += u_lightspecular0 * u_matspecular.rgb * ldot ; } lightSum0.rgb += (u_lightambient0 * u_matambientalpha.rgb + diffuse); v_color0 = clamp(clamp(lightSum0, 0.0, 1.0) + vec4(lightSum1, 0.0), 0.0, 1.0); v_texcoord = vec3(texcoord.xy * u_uvscaleoffset.xy, 0.0); v_fogdepth = (viewPos.z + u_fogcoef.x) * u_fogcoef.y; vec3 projPos = outPos.xyz / outPos.w; if (u_cullRangeMin.w <= 0.0 || (projPos.z >= u_cullRangeMin.z && projPos.z <= u_cullRangeMax.z)) { if (projPos.x < u_cullRangeMin.x || projPos.y < u_cullRangeMin.y || projPos.z < u_cullRangeMin.z || projPos.x > u_cullRangeMax.x || projPos.y > u_cullRangeMax.y || projPos.z > u_cullRangeMax.z) { outPos.xyzw = u_cullRangeMax.wwww; } } gl_Position = outPos; } 1 1 1 2022-11-01
Error in shader compilation: info: 0:31: L0001: Unknown character '�'(180) 0:31: L0001: Unknown character '�'(184) 0:31: L0001: Unknown character '�'(191) 0:31: L0001: Unknown character ''(23) 0:31: L0001: Unknown character '�'(134) 0:31: L0002: Undeclared variable 'u_depthRan' 0:31: L0001: Expected token '}', found 'end of file' 00000000:00000938 HWX C T Tex Cull #version 320 es // Mali-T820 - GLSL 320 precision highp float; #define gl_VertexIndex gl_VertexID #define splat3(x) vec3(x) #define mul(x, y) ((x) * (y)) in vec3 position; in vec2 texcoord; in lowp vec4 color0; uniform mat4 u_proj; uniform mat4 u_world; uniform mat4 u_view; uniform vec4 u_uvscaleoffset; uniform lowp vec4 u_matambientalpha; uniform highp vec4 u_depthRange; uniform highp vec4 u_cullRangeMin; uniform highp vec4 u_cullRangeMax; out lowp vec4 v_color0; out mediump vec3 v_texcoord; vec3 normalizeOr001(vec3 v) { return length(v) == 0.0 ? vec3(0.0, 0.0, 1.0) : normalize(v); } void main() { vec3 worldpos = mul(vec4(position, 1.0), u_world).xyz; mediump vec3 worldnormal = vec3(0.0, 0.0, 1.0); vec4 viewPos = vec4(mul(vec4(worldpos, 1.0), u_view).xyz, 1.0); vec4 outPos = mul(u_proj, viewPos); v_color0 = color0; v_texcoord = vec3(texcoord.xy * u_uvscaleoffset.xy, 0.0); vec3 projPos = outPos.xyz / outPos.w; float projZ = (projPos.z - u_depthRan�B�) * u_de�����I� ��� 1 1 1 2022-11-01
Error in shader compilation: info: Compile failed. ERROR: 0:30: 'gl_Po' : undeclared identifier ERROR: Unexpected end of source found 2 compilation errors. No code generated. 00000000:00000028 C Cull #version 320 es // PowerVR Rogue GE8320 - GLSL 320 precision highp float; #define gl_VertexIndex gl_VertexID #define splat3(x) vec3(x) #define mul(x, y) ((x) * (y)) in vec4 position; in lowp vec4 color0; uniform lowp float u_rotation; uniform highp vec4 u_depthRange; uniform highp vec4 u_cullRangeMin; uniform highp vec4 u_cullRangeMax; out lowp vec4 v_color0; void main() { v_color0 = color0; vec4 pos = position; vec4 outPos = pos; vec3 projPos = outPos.xyz / outPos.w; float projZ = (projPos.z - u_depthRange.z) * u_depthRange.w; if (u_cullRangeMin.w <= 0.0 || projZ * outPos.w > -outPos.w) { if (projPos.x < u_cullRangeMin.x || projPos.y < u_cullRangeMin.y || projPos.x > u_cullRangeMax.x || projPos.y > u_cullRangeMax.y) { outPos.xyzw = u_cullRangeMax.wwww; } } if (u_cullRangeMin.w <= 0.0) { if (projPos.z < u_cullRangeMin.z || projPos.z > u_cullRangeMax.z) { outPos.xyzw = u_cullRangeMax.wwww; } } gl_Po 1 1 1 2022-10-24
Error in shader compilation: info: FLEX: Unknown char � ERROR: 0:12: '�' : Syntax error: syntax error INTERNAL ERROR: no main() function! ERROR: 1 compilation errors. No code generated. thin3d #version 310 es #ifdef GL_ES precision mediump float; #endif #ifdef GL_ES precision lowp float; #endif #if __VERSION__ >= 130 #define varying in #define texture2D texture #define gl_FragColor fragColor0 out v�%;�h���Color0; #endif varying vec4 oColor0; varying vec2 oTexCoord0; uniform sampler2D Sampler0; void main() { gl_FragColor = texture2D(Sampler0, oTexCoord0).zyxw * oColor0; } 1 1 1 2022-10-23
Error in shader compilation: info: Compile failed. ERROR: 0:3: Syntax error, #endif mismatch WARNING: 0:1:1 '�' is an invalid character. WARNING: 0:1:2 '�' is an invalid character. WARNING: 0:1:3 '�' is an invalid character. WARNING: 0:1:4 '�' is an invalid character. WARNING: 0:1:5 '�' is an invalid character. WARNING: 0:1:7 '�' is an invalid character. 6 compilation warnings. 1 compilation errors. No code generated. thin3d p�����T�L_ES precision mediump float; #endif #ifdef GL_ES precision lowp float; #endif #if __VERSION__ >= 130 #define varying in #define gl_FragColor fragColor0 out vec4 fragColor0; #endif varying vec4 oColor0; void main() { gl_FragColor = oColor0; } 1 1 1 2022-10-20
Error in shader compilation: info: 0:1: L0001: Typename expected, found '02E' thin3d 02E�`2E�L_ES precision mediump float; #endif #ifdef GL_ES precision lowp float; #endif #if __VERSION__ >= 130 #define varying in #define gl_FragColor fragColor0 out vec4 fragColor0; #endif varying vec4 oColor0; void main() { gl_FragColor = oColor0; } 1 1 1 2022-10-18
Error in shader compilation: info: Compile failed. ERROR: 0:18:3 '�' is an invalid character. ERROR: 0:18:4 '�' is an invalid character. ERROR: 0:18:6 '�' is an invalid character. ERROR: 0:18:15 '�' is an invalid character. ERROR: 0:18:16 '�' is an invalid character. ERROR: 0:18:17 '�' is an invalid character. ERROR: 0:18:18 '�' is an invalid character. ERROR: 0:18:19 '�' is an invalid character. ERROR: 0:18:22 '�' is an invalid character. ERROR: 0:18:25 '�' is an invalid character. ERROR: 0:18:26 '�' is an invalid character. ERROR: 0:18:27 '�' is an invalid character. ERROR: 0:18:28 '�' is an invalid character. ERROR: 0:18:29 '�' is an invalid character. ERROR: 0:18:30 '' is an invalid character. ERROR: 0:18:31 '' is an invalid character. ERROR: 0:18: 'g' : undeclared identifier ERROR: 0:18: 'sition' : field selection requires structure, vector, or matrix on left hand side WARNING: 0:18:3 '�' is an invalid character. WARNING: 0:18:4 '�' is an invalid character. WARNING: 0:18:6 '�' is an invalid character. WARNING: 0:18:15 '�' is an invalid character. WARNING: 0:18:16 '�' is an invalid character. WARNING: 0:18:17 '�' is an invalid character. WARNING: 0:18:18 '�' is an invalid character. WARNING: 0:18:19 '�' is an invalid character. WARNING: 0:18:22 '�' is an invalid character. WARNING: 0:18:25 '�' is an invalid character. WARNING: 0:18:26 '�' is an invalid character. WARNING: 0:18:27 '�' is an invalid character. WARNING: 0:18:28 '�' is an invalid character. WARNING: 0:18:29 '�' is an invalid character. WARNING: 0:18:30 '' is an invalid character. WARNING: 0:18:31 '' is an invalid character. 16 compilation warnings. 18 compilation errors. No code generated. 40000000:00000012 THR Tex Flat #version 320 es // PowerVR Rogue GE8322 - GLSL 320 precision highp float; #define gl_VertexIndex gl_VertexID #define splat3(x) vec3(x) #define mul(x, y) ((x) * (y)) in vec4 position; in vec2 texcoord; in lowp vec4 color0; uniform mat4 u_proj_through; uniform lowp float u_rotation; flat out lowp vec4 v_color0; out mediump vec3 v_texcoord; void main() { v_texcoord = vec3(texcoord, 1.0); v_color0 = color0; vec4 outPos = mul(u_proj_through, vec4(position.xyz, 1.0)); g��.�sition =�����u,�{U����� 1 1 1 2022-10-17
Error in shader compilation: info: 0:1: L0001: Unknown character '�'(176) 0:3: P0001: #endif directive found outside if-section 0:1: L0001: Typename expected, found 'P' 0:1: L0003: Keyword '^' is reserved thin3d P^Ϻ�^ϺL_ES precision mediump float; #endif #ifdef GL_ES precision lowp float; #endif #if __VERSION__ >= 130 #define varying in #define gl_FragColor fragColor0 out vec4 fragColor0; #endif varying vec4 oColor0; void main() { gl_FragColor = oColor0; } 1 1 1 2022-10-13
Error in shader compilation: info: Fragment shader compilation failed. ERROR: 0:1: '<' : Syntax error: syntax error ERROR: 1 compilation errors. No code generated. thin3d ය� 1 1 1 2022-10-12

« Previous   Next »